Offshore Operation Facilities: Equipment and Procedures provides new engineers with the knowledge and methods that will assist them in maximizing efficiency while minimizing cost and helps them prepare for the many operational variables involved in offshore operations. This book clearly presents the working knowledge of subsea operations and demonstrates how to optimize operations offshore. The first half of the book covers the fundamental principles governing offshore engineering structural design, as well as drilling operations, procedures, and equipment. The second part includes common challenges of deep water oil and gas engineering as well as beach (shallow) oil engineering, submarine pipeline engineering, cable engineering, and safety system engineering. Many examples are included from various offshore locations, with special focus on offshore China operations. In the offshore petroleum engineering industry, the ability to maintain a profitable business depends on the efficiency and reliability of the structure, the equipment, and the engineer. Offshore Operation Facilities: Equipment and Procedures assists engineers in meeting consumer demand while maintaining a profitable operation. Comprehensive guide to the latest technology, strategies, and best practices for offshore operations Step-by-step approach for dealing with common challenges such as deepwater and shallow waters Includes submarine pipeline, cable engineering, and safety system engineering Unique examples from various offshore locations around the world, with special focus on offshore China
Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well's cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well's life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. - Provides a training guide focused on well completion and intervention - Includes coverage of subsea and fracturing operations - Presents proper well kill procedures - Allows readers to quickly get up-to-speed on today's regulations post-Macondo for well integrity, barrier management and other critical operation components
This book is an introductory reference guide to coiled tubing techniques in the oil and gas field. The book examines the common techniques of coiled tubing operations in the oil field. The author introduces the reader to the tools, equipment, and application methods of coiled tubing. It also talks about the safety precautions one must take during the process. This work may appeal to readers who are interested in oil and gas field techniques.
Unpredictable, unwanted, and costly, oil and gas well fishing is not a typical practice for drilling, workover and completion projects, but roughly one in every five wells experience this intervention. To stay on top, The Guide to Oilwell Fishing Operations, Second Edition will keep fishing tool product managers, drilling managers and all other well intervention specialists keyed in to all the latest tools, techniques and rules of thumb critical to conventional and complex wellbore projects, such as extended reach horizontal wells, thru-tubing, and coiled tubing operations. Strengthened with updated material and a new chapter on wellbore cleaning, The Guide to Oilwell Fishing Operations, Second Edition ensures that the life of the well will be saved no matter the unforeseen circumstances. Crucial aspects include: - Enhancements with updated equipment, technology, and a new chapter on wellbore cleaning methods - Additional input from worldwide service companies, providing a more comprehensive balance - Remains the only all-inclusive guide exclusively devoted to fishing tools, techniques, and rules of thumb - Remodeled with latest jars on the market, catch tools, and retrieving stuck packers with cutting technology - Improved with information on methods such as sidetracking and plug-and-abandon operations - Modernized with approaches and tactics on more advanced well projects such as high-angle deviated and horizontal wells and expandable casing technology to repair casing failure and leaks
This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology
Well activation is one of the most important aspects in the oil and gas industries and nitrogen gas is predominately used. The gas, being light, is sent down the producing reservoir which will enhance the production or improve the flow of crude oil. In addition to the methods used to increase production there are several problems like sand production and water production from the producing wells. Sand production occurs when the destabilizing stresses at the formation face exceed the strength of the natural arching tendencies and/or grain-to-grain cementation strength. Ideally, during oil production, the formation should be porous, permeable and well consolidated through which hydrocarbons can easily flow into the production wells. But sometimes, especially during production from unconsolidated sandstone reservoirs, the produced hydrocarbons may also carry large amounts of sand into the well bore and sand entering production wells is one of the oldest problems faced by oil companies and one of the toughest to solve. These unconsolidated formations may not restrain grain movement, and produce sand along with the fluids especially at high rates. Water production is also a problem that many reservoir or production engineers face in day-to-day life. As engineers we should be able to decide whether water control solutions should be applied or not. The excess production of water is caused by the depletion of the reservoir and simply sweeps away most of the oil that the reservoir can produce. This book gives an information how well activation using nitrogen is carried out, and how sand control and water control issues can be resolved.
Good engineers never stop looking for opportunities to improve the performance of their production systems. Performance enhancement methods are always carefully examined, and production data is analyzed in order to identify determining factors affecting performance.The two main activities of the production engineer in the petroleum and related industries are reservoir stimulation and artificial lift. The classic solution to maximizing a well's productivity is to stimulate it. The basis for selecting stimulation candidates should be a review of the well's actual and theoretical IPR. Low permeability wells often need fracturing on initial completion. In low permeability zones, additional post stimulation production can be significant to the economics, however, the production engineer needs to make management aware of the true long term potential or else overly optimistic projections can easily be made.The main purpose of stimulation is to enhance the property value by the faster delivery of the petroleum fluid and/or to increase ultimate economic recovery. The aim of reservoir stimulation is to bypass near-wellbore damage and return a well to its “natural” productivity / injectivity, to extend a conductive path deep into a formation and thus increase productivity beyond the natural level and to produce hydrocarbon from tight formation.The importance of reservoir stimulation is increasing due to following reasons: • Hydrocarbon fields in their mid-life• Production in these fields are in declining trend• The thrust area: Enhancement of productionHence, to improve productivity of the well matrix stimulation and hydraulic fracturing are intended to remedy, or even improve, the natural connection of the wellbore with the reservoir, which could delay the need for artificial lift.This book presents procedures taken in the Oil & Gas Industry for identifying well problems, and it suggests means of solving problems with the help of the Coil Tube unit which is used for improving well productivity and techniques like Acidizing and Hydraulic Fracturing.
