Coiled Tubing and Other Stimulation Techniques
Coiled Tubing and Other Stimulation Techniques

Author: Mohammed Ismail Iqbal

Publisher: CRC Press

Published: 2022-09-01

Total Pages: 373

ISBN-13: 1000796477

DOWNLOAD EBOOK

Good engineers never stop looking for opportunities to improve the performance of their production systems. Performance enhancement methods are always carefully examined, and production data is analyzed in order to identify determining factors affecting performance.The two main activities of the production engineer in the petroleum and related industries are reservoir stimulation and artificial lift. The classic solution to maximizing a well's productivity is to stimulate it. The basis for selecting stimulation candidates should be a review of the well's actual and theoretical IPR. Low permeability wells often need fracturing on initial completion. In low permeability zones, additional post stimulation production can be significant to the economics, however, the production engineer needs to make management aware of the true long term potential or else overly optimistic projections can easily be made.The main purpose of stimulation is to enhance the property value by the faster delivery of the petroleum fluid and/or to increase ultimate economic recovery. The aim of reservoir stimulation is to bypass near-wellbore damage and return a well to its “natural” productivity / injectivity, to extend a conductive path deep into a formation and thus increase productivity beyond the natural level and to produce hydrocarbon from tight formation.The importance of reservoir stimulation is increasing due to following reasons: • Hydrocarbon fields in their mid-life• Production in these fields are in declining trend• The thrust area: Enhancement of productionHence, to improve productivity of the well matrix stimulation and hydraulic fracturing are intended to remedy, or even improve, the natural connection of the wellbore with the reservoir, which could delay the need for artificial lift.This book presents procedures taken in the Oil & Gas Industry for identifying well problems, and it suggests means of solving problems with the help of the Coil Tube unit which is used for improving well productivity and techniques like Acidizing and Hydraulic Fracturing.

Well Control for Completions and Interventions
Well Control for Completions and Interventions

Author: Howard Crumpton

Publisher: Gulf Professional Publishing

Published: 2018-04-04

Total Pages: 828

ISBN-13: 0081022875

DOWNLOAD EBOOK

Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well's cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well's life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. - Provides a training guide focused on well completion and intervention - Includes coverage of subsea and fracturing operations - Presents proper well kill procedures - Allows readers to quickly get up-to-speed on today's regulations post-Macondo for well integrity, barrier management and other critical operation components

Coil tubing unit for oil production and remedial measures
Coil tubing unit for oil production and remedial measures

Author: Mohammed Ismail Iqbal

Publisher: CRC Press

Published: 2022-09-01

Total Pages: 154

ISBN-13: 1000794830

DOWNLOAD EBOOK

Well activation is one of the most important aspects in the oil and gas industries and nitrogen gas is predominately used. The gas, being light, is sent down the producing reservoir which will enhance the production or improve the flow of crude oil. In addition to the methods used to increase production there are several problems like sand production and water production from the producing wells. Sand production occurs when the destabilizing stresses at the formation face exceed the strength of the natural arching tendencies and/or grain-to-grain cementation strength. Ideally, during oil production, the formation should be porous, permeable and well consolidated through which hydrocarbons can easily flow into the production wells. But sometimes, especially during production from unconsolidated sandstone reservoirs, the produced hydrocarbons may also carry large amounts of sand into the well bore and sand entering production wells is one of the oldest problems faced by oil companies and one of the toughest to solve. These unconsolidated formations may not restrain grain movement, and produce sand along with the fluids especially at high rates. Water production is also a problem that many reservoir or production engineers face in day-to-day life. As engineers we should be able to decide whether water control solutions should be applied or not. The excess production of water is caused by the depletion of the reservoir and simply sweeps away most of the oil that the reservoir can produce. This book gives an information how well activation using nitrogen is carried out, and how sand control and water control issues can be resolved.

Acid Stimulation
Acid Stimulation

Author: Carl T. Montgomery

Publisher:

Published: 2016

Total Pages: 0

ISBN-13: 9781613994269

DOWNLOAD EBOOK

This book provides a comprehensive and up-to-the-minute presentation on acid stimulation technology.

Advanced Well Completion Engineering
Advanced Well Completion Engineering

Author: Renpu Wan

Publisher: Gulf Professional Publishing

Published: 2011-08-23

Total Pages: 737

ISBN-13: 0123858690

DOWNLOAD EBOOK

Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Abrasive Water Jet Perforation and Multi-Stage Fracturing
Abrasive Water Jet Perforation and Multi-Stage Fracturing

Author: Zhongwei Huang

Publisher: Gulf Professional Publishing

Published: 2017-10-19

Total Pages: 326

ISBN-13: 0128128429

DOWNLOAD EBOOK

Abrasive Water Jet Perforation and Multi-Stage Fracturing gives petroleum engineers, well completion managers and fracturing specialists a critical guide to understanding all the details of the technology including materials, tools, design methods and field applications. The exploitation and development of unconventional oil and gas resources has continued to gain importance, and multi-stage fracturing with abrasive water jets has emerged as one of the top three principal methods to recover unconventional oil and gas, yet there is no one collective reference to explain the fundamentals, operations and influence this method can deliver. The book introduces current challenges and gives solutions for the problems encountered. Packed with references and real-world examples, the book equips engineers and specialists with a necessary reservoir stimulation tool to better understand today's fracturing technology. - Provides understanding of the fundamentals, design and application of water jet perforation - Examines the pressure boosting assembly in all phases including initiation, hydraulic isolation and production stage - Evaluates production analysis, pump pressure predictions and the latest design software - Introduces current challenges and gives solutions for the problems encountered

Giant Micelles
Giant Micelles

Author: Raoul Zana

Publisher: CRC Press

Published: 2007-05-30

Total Pages: 581

ISBN-13: 1000654281

DOWNLOAD EBOOK

The co-evolution of a strong theoretical framework alongside application of a range of sophisticated experimental tools engendered rapid advancement in the study ofgiant micelles. Beginning with Anacker and Debye's 1951 experimental study of elongated micelles by light scattering and their subsequent theoretical inference that the thermodynamic

Hydraulic Fracturing Chemicals and Fluids Technology
Hydraulic Fracturing Chemicals and Fluids Technology

Author: Johannes Fink

Publisher: Gulf Professional Publishing

Published: 2013-08-14

Total Pages: 249

ISBN-13: 0124115217

DOWNLOAD EBOOK

When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. - Pinpoints the specific compounds used in any given fracturing operation - Provides a systematic approach to classifying fracturing fluid technology to meet specific project needs - Eliminates guesswork with easy-to-understand language on selection and components of hydraulic fracturing chemicals - Addresses environmental aspects of chemicals to safeguard employees and protect the environment