The book presents practical aspects related to the measurement of rotational power loss in soft magnetic materials. The book furthermore focuses on practical aspects of performing such measurements, the associated difficulties as well as solutions to the most common problems. Numerous practical aspects, hands-on experience, and most commonly encountered pitfalls are heavily discussed in the book. The text begins with introduction to magnetism, then follows with definitions of measurement methods of rotational power loss from physical viewpoint. Two chapters describe and detail the various sensors which can be employed for such measurements as well as all the aspects of designing, making, and using a magnetising apparatus. A synthesis of the likely optimal design of a magnetising apparatus is also given, preceded with the full reasoning based on all the research carried out to date. Characterisation of Soft Magnetic Materials Under Rotational Magnetisation serves as an excellent starting point for any student having to perform magnetic measurements under rotational magnetisation, but also under 1D, 2D or 3D excitation. Because the methods, sensors, and apparatus are extensively discussed it will also be a great reference for more senior researchers and experts in the field. There is a whole chapter devoted to analysis of measurement uncertainty. This subject is rarely published for magnetic measurements, which makes it more difficult for all researchers to understand the concepts and methodology used in uncertainty estimation. This chapter not only introduces the whole subject, but also provides multiple step-by-step examples which can be easily followed, from very simple cases to much more complex ones. All equations are presented with full SI units which greatly helps in practical application of the presented methodology. Each chapter is written in such a way that it can be studied on its own, so that the reader can focus only on the specific aspects, as required.
Correct and efficient measurements are vital to the understanding of materials properties and applications. This is especially so for magnetic materials for which in last twenty years, our understanding and use have changed dramatically. New or improved materials have been created and have reached the market. The Soft amorphous alloys, the Fe-based rare-earth magnets and the giant magnetorestrictive and magnetoresistive materials have all posed challenges to measurement. At the same time new digital measurement techniques have forced a change in laboratory and commercial measuring setups. A revision of measuring standards also occurred in the 1990s with the result that there is now a lack of up-to-date works on the measurement of magnetic materials. The basic objective of this work is to provide a comprehensive overview of the properties of the hard and soft magnetic materials relevant to applications and of thoroughly discussing the modern methodologies for employed in the measurement of these properties. The balance of these topics results in a complete text on the topic, which will be invaluable to researchers, students and practitioners in industry. It will be of significant interest not only to scientists working in the fields of power engineering and materials science but also to specialists in measurement who be able to easily find all the information they need. Comprehensive overview of the properties of the hard and soft magnetic materials Provides applications and discusses thoroughly the modern methodologies for employed in the measurement of these properties Provides the latest up-to-date works on the measurement of magnetic materials
In December 2002, the world's first commercial magnetic levitation super-train went into operation in Shanghai. The train is held just above the rails by magnetic levitation (maglev) and can travel at a speed of 400 km/hr, completing the 30km journey from the city to the airport in minutes. Now consumers are enjoying 50 GB hard drives compared to 0.5 GB hard drives ten years ago. Achievements in magnetic materials research have made dreams of a few decades ago reality. The objective of the four volume reference, Handbook of Advanced Magnetic Materials, is to provide a comprehensive review of recent progress in magnetic materials research. Each chapter will have an introduction to give a clear definition of basic and important concepts of the topic. The details of the topic are then elucidated theoretically and experimentally. New ideas for further advancement are then discussed. Sufficient references are also included for those who wish to read the original work. In the last decade, one of the most significant thrust areas of materials research has been nanostructured magnetic materials. There are several critical sizes that control the behavior of a magnetic material, and size effects become especially critical when dimensions approach a few nanometers, where quantum phenomena appear. The first volume of the book, Nanostructured Advanced Magnetic Materials, has therefore been devoted to the recent development of nanostructured magnetic materials, emphasizing size effects. Our understanding of magnetism has advanced with the establishment of the theory of atomic magnetic moments and itinerant magnetism. Simulation is a powerful tool for exploration and explanation of properties of various magnetic materials. Simulation also provides insight for further development of new materials. Naturally, before any simulation can be started, a model must be constructed. This requires that the material be well characterized. Therefore the second volume, Characterization and Simulation provides a comprehensive review of both experimental methods and simulation techniques for the characterization of magnetic materials. After an introduction, each section gives a detailed description of the method and the following sections provide examples and results of the method. Finally further development of the method will be discussed. The success of each type of magnetic material depends on its properties and cost which are directly related to its fabrication process. Processing of a material can be critical for development of artificial materials such as multilayer films, clusters, etc. Moreover, cost-effective processing usually determines whether a material can be commercialized. In recent years processing of materials has continuously evolved from improvement of traditional methods to more sophisticated and novel methods. The objective of the third volume, Processing of Advanced Magnetic Materials, is to provide a comprehensive review of recent developments in processing of advanced magnetic materials. Each chapter will have an introduction and a section to provide a detailed description of the processing method. The following sections give detailed descriptions of the processing, properties and applications of the relevant materials. Finally the potential and limitation of the processing method will be discussed. The properties of a magnetic material can be characterized by intrinsic properties such as anisotropy, saturation magnetization and extrinsic properties such as coercivity. The properties of a magnetic material can be affected by its chemical composition and processing route. With the continuous search for new materials and invention of new processing routes, magnetic properties of materials cover a wide spectrum of soft magnetic materials, hard magnetic materials, recording materials, sensor materials and others. The objective of the fourth volume, Properties and Applications of Advanced Magnetic Materials, is to provide a comprehensive review of recent development of various magnetic materials and their applications. Each chapter will have an introduction of the materials and the principles of their applications. The following sections give a detailed description of the processing, properties and applications. Finally the potential and limitation of the materials will be discussed.
This book discusses the most commonly used techniques for characterizing magnetic material properties and their applications. It provides a comprehensive and easily digestible collection and review of magnetic measurement techniques. It also examines the underlying operating principles and techniques of magnetic measurements, and presents current examples where such measurements and properties are relevant. Given the pervasive nature of magnetic materials in everyday life, this book is a vital resource for both professionals and students wishing to deepen their understanding of the subject.
Correct and efficient measurements are vital to the understanding of materials properties and applications. This is especially so for magnetic materials for which in last twenty years, our understanding and use have changed dramatically. New or improved materials have been created and have reached the market. The Soft amorphous alloys, the Fe-based rare-earth magnets and the giant magnetorestrictive and magnetoresistive materials have all posed challenges to measurement. At the same time new digital measurement techniques have forced a change in laboratory and commercial measuring setups. A revision of measuring standards also occurred in the 1990s with the result that there is now a lack of up-to-date works on the measurement of magnetic materials. The basic objective of this work is to provide a comprehensive overview of the properties of the hard and soft magnetic materials relevant to applications and of thoroughly discussing the modern methodologies for employed in the measurement of these properties. The balance of these topics results in a complete text on the topic, which will be invaluable to researchers, students and practitioners in industry. It will be of significant interest not only to scientists working in the fields of power engineering and materials science but also to specialists in measurement who be able to easily find all the information they need. Comprehensive overview of the properties of the hard and soft magnetic materials Provides applications and discusses thoroughly the modern methodologies for employed in the measurement of these properties Provides the latest up-to-date works on the measurement of magnetic materials
DIVDetailed theoretical study and a practical survey for solid-state physicists, engineers, graduate students. Ferromagnetism and ferrimagnetism, magnetization and domain structure, much more. 227 figures. /div
