This new book, Carbon Nanotubes for Energy and Environmental Applications, covers the timely issue of green applications of carbon nanotubes. It covers the diverse usages of carbon nanotubes for the sensing of environmentally hazardous chemicals, for water purification, for the protection of the environment, and for new energy applications. The development of highly sensitive CNT-based gas sensors for air pollution monitoring, for green synthesis of carbon nanotubes, and for green energy applications are discussed in this volume. The diverse topics in the volume include nanodiamonds for energy storage, new lubricant additives that enhance energy efficiency, how carbon nanotubes can be applied in the food and agricultural sectors, the use of CNTs in water purification and desalination, carbon nanotubes-based electrochemical sensors for environmentally hazardous chemicals, and much more. This timely book addresses a need of the hour and will provide valuable for environmentally conscious industry professionals, faculty and students, and researchers in materials science, engineering, physics, and chemistry with interest in nanomaterials.
Advanced materials for energy and environmental applications (such as rapid heating, anti-fouling/anti-virus surface, chemical sensor, textile/stretchable sensor, fuel cell, and lithium-ion batteries) have been extensively investigated in the academic and industrial fields. The advent of cabon-based nano-materials (carbon nanotubes, graphene, and carbon black) and inonganic nano-materials (Ag wire/particles, Cu mesh, and transition metal dichalcogenide) has accelerated research interest in energy and environmental applications. This book is focused on the emerging concept and improvement of energy and environmental basic research, as well as in the characterization and analysis of novel energy and environmental base materials. The contents of the book are as below: - Theoretical and experimental studies on advanced conducting nanocomposites; - Electrical properties of nanocomposites under various conditions (dynamic mode, aspect ratio, alignment, and contents) and its applications; - Advanced material for energy applications; - Analysis and materials for environmental applications.
Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications provides the fundamental physico-chemical characterizations of recently explored carbon-based polymer nanocomposites, such as carbon nanotubes, graphene and its derivatives, nanodiamond, fullerenes and other nano-sized carbon allotropes. The book also covers the applications of carbon-based polymer nanocomposite in the environmental and energy fields. Topics range from the various approaches that have been explored and developed for the fabrication of carbon-based polymer nanocomposite, to their applications in tackling environmental and energy related issues. - Provides a clear picture of the current state-of-the-art and future trends in carbon-based polymer nanomaterials - Explains the interactions between nanofiller-polymer matrices and mechanisms related to applications in environmental pollution and energy shortage - Includes computational and experimental studies of the physical and chemical properties of carbon-based polymer nanocomposites - Features chapters written by world leading experts
Environmental chemistry is a fast developing science aimed at deciphering fundamental mechanisms ruling the behaviour of pollutants in ecosystems. Applying this knowledge to current environmental issues leads to the remediation of environmental media, and to new, low energy, low emission, sustainable processes. Nanotechnology applications for alternative energies such as solar power, fuel cells, hydrogen and lithium batteries are reviewed in the first section. Recent investigations on carbon nanotubes, nanocatalysts and cyclodextrins disclose unprecedented techniques to monitor and clean pollutants such as greenhouse gases, heavy metals, pesticides, pathogens occurring in water, air and soil. The second section reviews the risks for human health of critical pollutants such as endocrine disruptors, dioxins and heavy metals contaminating seafood and sediments. An exhaustive review of DDT isomers reveals unexpected mechanisms of DDT transfer to fishes. A chapter on pollutant geochronology using river sedimentary archives provides novel insights on pollution history since the beginning of the anthropocene. This book will be a valuable source of information for engineers and students developing novel applied techniques to monitor and clean pollutants in air, wastewater, soils and sediments.
In recent years, the area dealing with the physical chemistry of materials has become an emerging discipline in materials science that emphasizes the study of materials for chemical, sustainable energy, and pollution abatement applications. Written by an active researcher in this field, Physical Chemistry of Materials: Energy and Environmental Appl
Nanoscience and nanotechnology are interdisciplinary fields that bring together physicists, chemists, materials scientists, and engineers to meet the potential future challenges that humankind will face, including the search for renewable energies for sustainable development and new technologies for carbon capture and environmental protection. Among the current subjects in nanoscience and nanotechnology, nanomaterials are developing fast and explosively and attracting a huge amount of attention. They continue to show promising potential and have found application in solar cells, fuel cells, secondary batteries, supercapacitors, air and water purification, and removal of domestic and outdoor air pollutants. To summarize the past developments and encourage future efforts, this book presents contributions from world-renowned specialists in the fields of nanomaterials, energy, and environmental science. It discusses the design and fabrication of nanostructured materials and their energy and environmental applications.
This book describes various carbon nanomaterials and their unique properties, and offers a detailed introduction to graphene–carbon nanotube (CNT) hybrids. It demonstrates strategies for the hybridization of CNTs with graphene, which fully utilize the synergistic effect between graphene and CNTs. It also presents a wide range of applications of graphene–CNT hybrids as novel materials for energy storage and environmental remediation. Further, it discusses the preparation, structures and properties of graphene–CNT hybrids, providing interesting examples of three types of graphene–CNT hybrids with different nanostructures. This book is of interest to a wide readership in various fields of materials science and engineering.
"This new book, Carbon Nanotubes for Energy and Environmental Applications, covers the timely issue of green applications of carbon nanotubes. It covers the diverse usages of carbon nanotubes for the sensing of environmentally hazardous chemicals, for water purification, for the protection of the environment, and for new energy applications. The development of highly sensitive CNT-based gas sensors for air pollution monitoring, for green synthesis of carbon nanotubes, and for green energy applications are discussed in this volume. The diverse topics in the volume include nanodiamonds for energy storage, new lubricant additives that enhance energy efficiency, how carbon nanotubes can be applied in the food and agricultural sectors, the use of CNTs in water purification and desalination, carbon nanotubes-based electrochemical sensors for environmentally hazardous chemicals, and much more. This timely book addresses a need of the hour and will provide valuable for environmentally conscious industry professionals, faculty and students, and researchers in materials science, engineering, physics, and chemistry with interest in nanomaterials"--
Polymer-Based Nanocomposites for Energy and Environmental Applications provides a comprehensive and updated review of major innovations in the field of polymer-based nanocomposites for energy and environmental applications. It covers properties and applications, including the synthesis of polymer based nanocomposites from different sources and tactics on the efficacy and major challenges associated with successful scale-up fabrication. The chapters provide cutting-edge, up-to-date research findings on the use of polymer based nanocomposites in energy and environmental applications, while also detailing how to achieve material's characteristics and significant enhancements in physical, chemical, mechanical and thermal properties. It is an essential reference for future research in polymer based nanocomposites as topics such as sustainable, recyclable and eco-friendly methods for highly innovative and applied materials are current topics of importance. - Covers a wide range of research on polymer based nanocomposites - Provides updates on the most relevant polymer based nanocomposites and their prodigious potential in the fields of energy and the environment - Demonstrates systematic approaches and investigations from the design, synthesis, characterization and applications of polymer based nanocomposites - Presents a useful reference and technical guide for university academics and postgraduate students (Masters and Ph.D.)
This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
