Calibration to Determine Load and Resistance Factors for Geotechnical and Structural Design
Author: Tony M. Allen
Publisher:
Published: 2005
Total Pages:
ISBN-13:
DOWNLOAD EBOOKRead and Download eBook Full
Author: Tony M. Allen
Publisher:
Published: 2005
Total Pages:
ISBN-13:
DOWNLOAD EBOOKAuthor: William Andrew Singletary
Publisher:
Published: 1998
Total Pages: 264
ISBN-13:
DOWNLOAD EBOOKAuthor: Michael C. McVay
Publisher:
Published: 1998
Total Pages: 202
ISBN-13:
DOWNLOAD EBOOKAuthor: Patrick Arnold
Publisher: IOS Press
Published: 2013
Total Pages: 340
ISBN-13: 1614991626
DOWNLOAD EBOOKThe ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering
Author: Kok-Kwang Phoon
Publisher: CRC Press
Published: 2018-10-09
Total Pages: 624
ISBN-13: 1482227223
DOWNLOAD EBOOKEstablishes Geotechnical Reliability as Fundamentally Distinct from Structural Reliability Reliability-based design is relatively well established in structural design. Its use is less mature in geotechnical design, but there is a steady progression towards reliability-based design as seen in the inclusion of a new Annex D on "Reliability of Geotechnical Structures" in the third edition of ISO 2394. Reliability-based design can be viewed as a simplified form of risk-based design where different consequences of failure are implicitly covered by the adoption of different target reliability indices. Explicit risk management methodologies are required for large geotechnical systems where soil and loading conditions are too varied to be conveniently slotted into a few reliability classes (typically three) and an associated simple discrete tier of target reliability indices. Provides Realistic Practical Guidance Risk and Reliability in Geotechnical Engineering makes these reliability and risk methodologies more accessible to practitioners and researchers by presenting soil statistics which are necessary inputs, by explaining how calculations can be carried out using simple tools, and by presenting illustrative or actual examples showcasing the benefits and limitations of these methodologies. With contributions from a broad international group of authors, this text: Presents probabilistic models suited for soil parameters Provides easy-to-use Excel-based methods for reliability analysis Connects reliability analysis to design codes (including LRFD and Eurocode 7) Maximizes value of information using Bayesian updating Contains efficient reliability analysis methods Accessible To a Wide Audience Risk and Reliability in Geotechnical Engineering presents all the "need-to-know" information for a non-specialist to calculate and interpret the reliability index and risk of geotechnical structures in a realistic and robust way. It suits engineers, researchers, and students who are interested in the practical outcomes of reliability and risk analyses without going into the intricacies of the underlying mathematical theories.
Author: Murad Yusuf Abu-Farsakh
Publisher:
Published: 2009
Total Pages: 126
ISBN-13:
DOWNLOAD EBOOKAuthor: George G. Goble
Publisher: Transportation Research Board
Published: 1999
Total Pages: 80
ISBN-13: 9780309068543
DOWNLOAD EBOOKThis synthesis report will be of interest to geotechnical, structural, and bridge engineers, especially those involved in the development and implementation of the geotechnical aspects of the AASHTO Bridge Code. The synthesis documents a review of geotechnical related LRFD specifications and their development worldwide to compare them with the current AASHTO LRFD Bridge Code. Design procedures for foundations, earth retaining structures, and culverts are summarized and compared with the methods specified by the AASHTO code. This TRB report provides information designed to assist engineers in implementing the geotechnical features of LRFD methods. Information for the synthesis was collected by surveying U.S. and Canadian transportation agencies and by conducting a literature search using domestic and international sources. Interviews were also conducted with selected international experts. The limited available experience in the United States and information from international practice are discussed to understand the problems that have arisen in order that solutions may be found. Based on the studies reported here, suggestions for improving the code are identified.
Author: T. Schweckendiek
Publisher: IOS Press
Published: 2015-10-09
Total Pages: 1028
ISBN-13: 161499580X
DOWNLOAD EBOOKGeotechnical Risk and Safety V contains contributions presented at the 5th International Symposium on Geotechnical Safety and Risk (5th ISGSR, Rotterdam, 13-16 October 2015) which was organized under the auspices of the Geotechnical Safety Network (GEOSNet) and the following technical committees of the of the International Society of Soil Mechanics and Geotechnical Engineering (ISSGME): • TC304 Engineering Practice of Risk Assessment & Management • TC205 Safety and Serviceability in Geotechnical Design • TC212 Deep Foundations • TC302 Forensic Geotechnical Engineering Geotechnical Risk and Safety V covers seven themes: 1. Geotechnical Risk Management and Risk Communication 2. Variability in Ground Conditions and Site Investigation 3. Reliability and Risk Analysis of Geotechnical Structures 4. Limit-state design in Geotechnical Engineering 5. Assessment and Management of Natural Hazards 6. Contractual and Legal Issues of Foundation and (Under)Ground Works 7. Case Studies, Monitoring and Observational Method The 5th ISGSR is the continuation of a series of symposiums and workshops on geotechnical risk and reliability, starting with LSD2000 (Melbourne, Australia), IWS2002 (Tokyo and Kamakura, Japan), LSD2003 (Cambridge, USA), Georisk2004 (Bangalore, India), Taipei2006 (Taipei, Taiwan), the 1st ISGSR (Shanghai, China, 2007), the 2nd ISGSR (Gifu, Japan, 2009), the 3rd ISGSR (Munich, Germany, 2011) and the 4th ISGSR (Hong Kong, 2013).
Author: Yusuke Honjo
Publisher: CRC Press
Published: 2009-06-01
Total Pages: 400
ISBN-13: 0203867319
DOWNLOAD EBOOKCommunication of risks within a transparent and accountable framework is essential in view of increasing mobility and the complexity of the modern society and the field of geotechnical engineering does not form an exception. As a result, modern risk assessment and management are required in all aspects of geotechnical issues, such as planning, desi