BR Diesel Locomotives in Preservation

BR Diesel Locomotives in Preservation

Author: Fred Kerr

Publisher: Pen and Sword

Published: 2017-10-30

Total Pages: 611

ISBN-13: 1526713101

DOWNLOAD EBOOK

When British Railways (BR) initiated its Modernization Plan in 1954 it had little experience of diesel locomotives thus initiated a Pilot Scheme to trial combinations of the three elements comprised within a locomotive the engine, transmission and body.The initial orders for 174 locomotives were placed in November 1955, but even before the first locomotive had been delivered, changes in Government policy led to bulk orders for most designs being trailed. It was only in 1968, once steam traction had been removed from the network, that BR was able to review the success, or otherwise, of its diesel fleet and decide which designs to withdraw from service.The nascent preservation movement of the time was concerned to preserve steam locomotives whilst only buying diesel shunting locomotives for support roles on heritage lines and it wasnt until 1977 that any effort was made to preserve main line diesels. Once it was confirmed that diesel locomotives had an appeal to enthusiasts, further purchases were made that resulted in examples of most of the BR diesel classes being represented within the preservation movement.Fred Kerrs book details those classes which are represented on heritage lines, identifies where possible their location as of December 2016, shows many of them at work and shows what is involved in the restoration, maintenance and operation of diesel locomotives by the volunteers whose efforts are vital but rarely acknowledged.Some of the preserved locomotives were bought for possible use on the national network and this was facilitated by the Railways Bill 1993. A complementary album of preserved and heritage locomotives titled Heritage Traction on the Main Line details the locomotive classes whose representatives are still in regular use on the national network as at December 2016 and follows a similar format to this album.


British Diesel Locomotives of the 1950s and ‘60s

British Diesel Locomotives of the 1950s and ‘60s

Author: Greg Morse

Publisher: Bloomsbury Publishing

Published: 2016-07-28

Total Pages: 88

ISBN-13: 1784421790

DOWNLOAD EBOOK

After the Second World War, the drive for the modernisation of Britain's railways ushered in a new breed of locomotive: the Diesel. Diesel-powered trains had been around for some time, but faced with a coal crisis and the Clean Air Act in the 1950s, it was seen as a part of the solution for British Rail. This beautifully illustrated book, written by an expert on rail history, charts the rise and decline of Britain's diesel-powered locomotives. It covers a period of great change and experimentation, where the iconic steam engines that had dominated for a century were replaced by a series of modern diesels including the ill-fated 'Westerns' and the more successful 'Deltics'.


The English Electric Class 37/4 Diesel Locomotives

The English Electric Class 37/4 Diesel Locomotives

Author: Fred Kerr

Publisher: Pen and Sword Transport

Published: 2022-09-15

Total Pages: 130

ISBN-13: 1399096168

DOWNLOAD EBOOK

In the prelude to the privatisation of BR the Provincial Sector (later Regional Railways) became responsible for local / secondary train services and initiated the refurbishment of 31 Class 37 locomotives, fitted with train heating equipment – hence designated Class 37/4 - to support the shortfall of DMU trainsets. Their initial task was to work services on Scottish lines radiating from Inverness to points north and Glasgow to service the West Highland Line with a small batch based in South Wales to service Cambrian Line services and services from Cardiff traversing the Marches Line to serve Liverpool. These services were soon replaced by Sprinter trainsets thus releasing the fleet to other duties including freight operators hence, at privatisation in April 1994, the fleet became owned by freight companies who subsequently hired locomotives to both other freight companies and passenger operators. Throughout their working life the fleet members have proved invaluable and capable of powering a variety of services whose history confirms both the locomotives’ adaptability and prowess in handling the duties allocated to them. Fred Kerr’s book seeks to show this adaptability by detailing the reason for their initial creation and the tasks successfully undertaken once released from their initial roles as support for the shortage of DMU trainsets. The advent of privatisation saw an increased demand for their ‘go-anywhere do anything’ ability which is also displayed by the range of photographs that illustrate the wide range of duties performed by class members. Once withdrawn from service some class members were purchased for preservation and – such was their adaptability – that preserved examples were hired by train operators to cover duties that no other class of diesel locomotive was capable of achieving.


The Metropolitan-Vickers Type 2 Co-Bo Diesel-Electric Locomotives

The Metropolitan-Vickers Type 2 Co-Bo Diesel-Electric Locomotives

Author: Anthony P. Sayer

Publisher: Pen and Sword Transport

Published: 2020-06-30

Total Pages: 553

ISBN-13: 1526742829

DOWNLOAD EBOOK

A thorough history of the Metropolitan-Vickers locomotive, also known as “Class 28,” featuring 160 color and black & white photos. This book provides an in-depth history of the Metropolitan-Vickers diesel-electric Type 2 locomotives, more frequently known collectively as the “Co-Bo’s” due to their unusual wheel arrangement. Twenty locomotives were constructed during the late-1950s for use on the London Midland Region of British Railways. The fleet was fraught with difficulties from the start, most notably due to problems with their Crossley engines, this necessitating the need for extensive rehabilitation work during the early-1960s. Matters barely improved and the option to completely re-engine the locomotives with English Electric units was debated at length, but a downturn in traffic levels ultimately resulted in their demise by the end of 1968 prior to any further major rebuilding work being carried out. Significant quantities of new archive and personal sighting information, supported by over 180 photographs and diagrams, have been brought together to allow dramatic new insights into this enigmatic class of locomotives, including the whole debate surrounding potential re-engining, their works histories, the extended periods in storage, together with in-depth reviews of the various detail differences and liveries.


Steam at Work

Steam at Work

Author: Fred Kerr

Publisher: Casemate Publishers

Published: 2017-06-30

Total Pages: 440

ISBN-13: 1473896592

DOWNLOAD EBOOK

The author, Fred Kerr, was introduced to the world of industrial railways in 1956 when his parents moved from Edinburgh to Corby in Northamptonshire, where the local steelworks offered a mix of locomotives from several manufacturers. When steam traction finished on BR in August 1968, Fred's interest in railways continued with diesel and electric traction, whilst retaining a passing interest in industrial locomotives through his visits to the heritage lines which were initiated in the post-Beeching era.When the author converted to digital photography in 2001, he visited many heritage lines as he sought to gain experience in the digital world. When he looked back after a decade of digital photography, he noted that industrial locomotives were still at work on many heritage lines throughout the UK. He also noted that during the 1960s the effort to preserve mainline steam traction had overlooked the availability of industrial locomotives, leading to the scrapping of many locomotives with both a story to tell and an incomplete working life.The result is a book that pays tribute to industrial locomotives which are still at work by detailing the manufacturers of these workhorses and the locomotives which they built; identifying their working lives where possible; showing their entry into preservation and paying tribute to those heritage lines which appreciated the value of these unsung heroes of the Industrial Revolution by buying the 'scrap' locomotives then restoring them to working order.


British Steam BR Standard Locomotives

British Steam BR Standard Locomotives

Author: Keith Langston

Publisher: Casemate Publishers

Published: 2012-01-01

Total Pages: 321

ISBN-13: 1845631463

DOWNLOAD EBOOK

After WWII the existing railway companies were all put into the control of the newly formed British Transport Commission and that government organization spawned British Railways, which came into being on 1st January 1948. The railway infrastructure had suffered badly during the war years and most of the steam locomotives were 'tired' and badly maintained and or life expired. Although the management of British Railways was already planning to replace steam power with diesel and electric engines/units they still took a decision to build more steam locomotives (as a stop gap). Some 999 (yes just 1 short) Standard locomotives were built in 12 classes ranging from super powerful express and freight engine to suburban tank locomotives. The locomotives were mainly in good order when the order came in 1968 to end steam, some only 8 years old.There still exists a fleet of 46 preserved Standards of which 75% are in working order in and around the UKs preserved railways, furthermore 3 new build standard locomotives are proposed. Steam fans who were around in the 1960s all remember the 'Standards'.


The B T H and North British Type 1 Bo-Bo Diesel-Electric Locomotives - British Railways Classes 15 and 16

The B T H and North British Type 1 Bo-Bo Diesel-Electric Locomotives - British Railways Classes 15 and 16

Author: Anthony P. Sayer

Publisher: Pen and Sword Transport

Published: 2021-12-30

Total Pages: 765

ISBN-13: 1526761971

DOWNLOAD EBOOK

The British Railways ‘Pilot Scheme’ orders of 1955 included ten BTH and ten NBL Type 1 locomotives, these being introduced during 1957-61 for use in East London, and on the Great Eastern and London, Tilbury & Southend lines. The BTH fleet subsequently expanded to forty-four, as a consequence of their light axle-loading and the availability of spare manufacturing capacity which BR chose to exploit in their quest to eliminate steam traction. Further construction of these two classes ceased after the fifty-four units, with preference being given to the highly reliable English Electric product which by mid-1962 had proliferated to 128 examples. The NBL fleet survived until 1968, being withdrawn after ten years of indifferent performance. The BTH locomotives followed by 1971, although four lingered on as carriage pre-heating units. Dramatic reductions in goods traffic during the 1960s/70s particularly impacted local trip and transfer freight duties, the ‘bread and butter’ work for the Type 1s, and it was inevitable that the less successful classes were retired from traffic first. This book looks at the short history of these two classes, making extensive use of archive sources, combined with the primary observations of numerous enthusiasts. Previously unpublished information, covering the introduction, appearance design and performance issues of the locomotives, form a central focus, and, allocations, works histories, storage and disposals, liveries and detail differences are covered in the same level of detail as previous volumes in the ‘Locomotive Portfolio” series.


Western Diesel Hydraulic Locomotives in Preservation

Western Diesel Hydraulic Locomotives in Preservation

Author: Fred Kerr

Publisher: Pen and Sword Transport

Published: 2022-07-28

Total Pages: 130

ISBN-13: 1399013408

DOWNLOAD EBOOK

When British Railways initiated its Modernisation Plan in 1955, its Western Region elected to trial locomotive designs with hydraulic transmission whilst BR encouraged designs with electric transmission. The Western Region felt that the lighter weight of 78 tons for a diesel hydraulic locomotive producing 2000 hp, compared to an equivalent weight of 132 tons for a diesel electric locomotive producing 2000 hp, would better meet BR’s requirement for a modern locomotive. BR’s failure to follow up with its declared policy of having all freight vehicles fitted with brakes saw operators preferring the heavier diesel electric designs which proved more able to operate trains without through brakes at higher speed. The greatest concern was with operating costs whereby the Western Region policy of replacing components at the depot then transferring them to Swindon for repair incurred heavy costs that were reflected in the maintenance cost per locomotive. Given the smaller number of diesel hydraulic locomotives and the larger number of diesel electric locomotives it was little surprise that by the mid-1960s a cost comparison showed that the build and operation of diesel electric locomotives was increasingly cheaper over the long term. Furthermore the increased availability of diesel electric locomotives released by a combination of factors provided an opportunity to replace the diesel hydraulic fleet, which was withdrawn from service during the 1970s. The preservation of redundant locomotives was slow but once it was confirmed, by the preservation of ‘Hymek’ Class 35 D7017 in 1975, that public appeals could quickly fund the preservation of withdrawn examples further public appeals followed. In a short space of time 31 locomotives from a mixed fleet of 358 locomotives entered preservation to remind both enthusiasts and the public of a concept (i.e. hydraulic transmission) that had had much to offer but had been dismissed on questionable financial grounds.


Barry

Barry

Author: Peter Brabham

Publisher: Opc

Published: 2013-02-01

Total Pages: 256

ISBN-13: 9780860936435

DOWNLOAD EBOOK

If it had not been for the scrapyard of Woodham Bros at Barry, in South Wales, the railway preservation movement in the British Isles would have been a fraction of the scale that it is today and a number of steam locomotive classes would have been rendered extinct. The story of Woodham Bros has become part of railway folklore because it tells how 200 steam locomotives were rescued from scrapping as a result of unforeseen circumstances.