Blown Film Extrusion
Blown Film Extrusion

Author: Kirk Cantor

Publisher:

Published: 2018

Total Pages: 179

ISBN-13: 9781569906965

DOWNLOAD EBOOK

"From hardware and materials through processing and properties, a broad coverage of blown film extrusion is presented. A primary objective of this book is to ensure a useful balance of theory and practice. The reader will find the answers to why they encounter certain effects in the blown film process so that they are better able to troubleshoot and improve their operations. At the same time, current practices and equipment are emphasized to keep readers up-to-date with the most productive and efficient technology. The companion computer-based learning tool, The Blown Film Extrusion Simulator, is provided to enhance the reader's understanding. This software was developed specifically to teach blown film extrusion equipment operation and processing principles, and is available for download. Throughout this book, exercises using the simulator are described to complement the methods and principles explained. New in this third edition is a chapter on polymer rheology, with an overview of the rheology of polymer melts and its effect on extruding blown film. Additionally, improvements and corrections have been made throughout the book. Contents: Materials for Blown Film Polymer Rheology Extrusion Overview Hardware for Blown Film Processing Coextrusion Film Properties Troubleshooting"--

Extrusion
Extrusion

Author: Harold F. Giles Jr

Publisher: William Andrew

Published: 2013-09-21

Total Pages: 638

ISBN-13: 1437734820

DOWNLOAD EBOOK

The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Extrusion
Extrusion

Author: Harold F. Giles Jr

Publisher: William Andrew

Published: 2004-12-31

Total Pages: 575

ISBN-13: 0815517114

DOWNLOAD EBOOK

Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.

Polyethylene Film Extrusion
Polyethylene Film Extrusion

Author: B. H Gregory

Publisher: Trafford Publishing

Published: 2009-11

Total Pages: 234

ISBN-13: 1426918100

DOWNLOAD EBOOK

A revised version of this book is now available.The polyethylene industry has been in the midst of major restructuring and rationalization. This has lead to joint ventures and alliances to combine technologies and exploit opportunities to maximize improvements in process productivity, catalyst innovations, and enhancements in extrusion technology and converting. This comprehensive study of the polyethylene film extrusion process describes this technology in detail. In depth descriptions of the manufacturing processes for polyethylene homopolymers and copolymers, including metallocenes, are reviewed. All aspects of machine design with particular emphasis on screws and dies including coextrusion are discussed comprehensively. With computer modeling, the interactions between equipment and polymer are quantified. All aspects of equipment design and polymer features that control melt fracture, interfacial instabilities, gauge control, output and temperature, and cooling of blown and cast film processes are presented quantitatively. This methodology will highlight solutions in troubleshooting for optimum design and operation and the best available polymer and formulation choices. All polyethylene film applications in packaging, agriculture, lamination, and construction, consumer, industrial, and health care are reviewed and discussed in depth.

Handbook of Troubleshooting Plastics Processes
Handbook of Troubleshooting Plastics Processes

Author: John R. Wagner, Jr.

Publisher: John Wiley & Sons

Published: 2012-09-19

Total Pages: 472

ISBN-13: 1118511204

DOWNLOAD EBOOK

This handbook provides a framework for understanding how to characterize plastic manufacturing processes for use in troubleshooting problems. The 21 chapters are authored by well-known and experienced engineers who have specialized knowledge about the processes covered in this practical guide. From the Preface: “In every chapter, the process is described and the most common problems are discussed along with the root causes and potential technical solutions. Numerous case studies are provided that illustrate the troubleshooting process. Mark A. Spalding, The Dow Chemical Company

Design of Extrusion Forming Tools
Design of Extrusion Forming Tools

Author: Olga Carneiro

Publisher: Smithers Rapra

Published: 2012-12-19

Total Pages: 306

ISBN-13: 1847355196

DOWNLOAD EBOOK

The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity.This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of special dies and process modeling. It is an updated and unique book on the subject, where each chapter is prepared by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.

Stretch Blow Molding
Stretch Blow Molding

Author: Ottmar Brandau

Publisher: William Andrew

Published: 2016-08-10

Total Pages: 376

ISBN-13: 0323462936

DOWNLOAD EBOOK

Stretch Blow Molding, Third Edition, provides the latest on the blow molding process used to produce bottles of the strength required for carbonated drinks. In this updated handbook, Ottmar Brandau introduces the technology of stretch blow molding, explores practical aspects of designing and running a production line, and looks at practical issues for quality control and troubleshooting. As an experienced engineer, manager, and consultant, Brandau's focus is on optimizing the production process, improving quality, and reducing cycle time. In this new edition, the author has thoroughly reviewed the content of the book, providing updates on new developments in stretch blow molding, including neck sizes, new equipment and processes, and the economics of the process. The book is a thoroughly practical handbook which provides engineers and managers with the toolkit to improve production and engineering aspects in their own businesses, allowing them to save money, increase output, and improve competitiveness by adopting new technologies. - Provides knowledge and understanding of the latest technological and best practice developments in stretch blow molding - Includes money saving, practical strategies to optimize the production process, improve quality, and reduce cycle times - Provides a guide to the training of operators, as well as tactics on how to troubleshoot when products are faulty, productivity is low, or machinery is not operating as expected

Multilayer Flexible Packaging
Multilayer Flexible Packaging

Author: John R. Wagner Jr.

Publisher: William Andrew

Published: 2016-03-29

Total Pages: 411

ISBN-13: 0323477186

DOWNLOAD EBOOK

Multilayer Flexible Packaging, Second Edition, provides a thorough introduction to the manufacturing and applications of flexible plastic films, covering materials, hardware and processes, and multilayer film designs and applications. The book gives engineers and technicians a better understanding of the capability and limitations of multilayer flexible films and how to use them to make effective packaging. It includes contributions from world renowned experts and is fully updated to reflect the rapid advances made in the field since 2009, also including an entirely new chapter on the use of bio-based polymers in flexible packaging. The result is a practical, but detailed reference for polymeric flexible packaging professionals, including product developers, process engineers, and technical service representatives. The materials coverage includes detailed sections on polyethylene, polypropylene, and additives. The dies used to produce multilayer films are explored in the hardware section, and the process engineering of film manufacture is explained, with a particular focus on meeting specifications and targets. In addition, a new chapter has been added on regulations for food packaging – including both FDA and EU regulations. - Provides a complete introduction to multilayer flexible packaging, assisting plastics practitioners with the development, design, and manufacture of flexible packaging for food, cosmetics, pharmaceuticals, and more - Presents thorough, well-written, and up-to-date reviews of the current technology by experts in the field, making this an essential reference for any engineer or manager - Includes discussion and analysis of the latest rules and regulations governing food packaging