Timber is one of the oldest of man's building materials, but because the building scene today is dominated by concrete and steel, many designers are unfamiliar with the properties of timber and its structural vocabulary. This new book begins with an extended introduction to timber as a building material: its various forms and properties, its response to environmental conditions, and the Building Regulations relating to its use. It goes on to follow the general sequence of work, starting with the commission, and then dealing with the survey, the investigation and the appraisal.
England has a surprising number of timber-framed buildings, many dating back to pre 1700, which are listed buildings. There is now an increasing demand for these buildings to be adapted to suit modern day requirements. This book takes a practical approach and discusses materials and carpentry techniques used in the repair of these buildings, along with a qualitative account of the structural behaviour of the timber elements.
This practical guide to the assessment and repair of historic buildings is invaluable for structural engineers, architects, surveyors and builders working in all aspects of building conservation. Taking a practical step-by-step approach, the authors discuss the appraisal of buildings and the differences in structural behaviour between new and existing structures. Each stage in the appraisal is explained, using examples from the authors' own work. Each major construction material is assessed in detail, with separate sections on masonry, concrete, timber and the particularly complex issues of iron and steel framed buildings. Techniques for testing the ability of a building to continue its existing use or to be converted to a new use are explained.
Bridges built in timber are enjoying a significant revival, both for pedestrian and light traffic and increasingly for heavier loadings and longer spans. Timber's high strength-to-weight ratio, combined with the ease and speed of construction inherent in the off-site prefabrication methods used, make a timber bridge a suitable option in many different scenarios. This handbook gives technical guidance on forms, materials, structural design and construction techniques suitable for both small and large timber bridges. Eurocode 5 Part Two (BS EN 1995-2) for the first time provides an international standard for the construction of timber bridges, removing a potential obstacle for engineers where timber construction for bridges has not – in recent centuries at least – been usual. Clearly illustrated throughout, this guide explains how to make use of this oldest construction material in a modern context to create sustainable, aesthetically pleasing, practical and durable bridges. Worldwide examples include Tourand Creek Bridge, Canada; Toijala, Finland; Punt la Resgia, Switzerland; Pont de Crest, France; Almorere Pylon Bridge, the Netherlands.
Addressing the potential problems that can occur in all types of timber construction, from fungal and insect attack, through to structural inadequacy to accidental damage, this guide tells how to identify, remedy and repair the problems in detail.
This volume contains papers presented at the Twelfth International Conference on Structural Studies, Repairs and Maintenance of Heritage Architecture. The conference provides an ideal forum for professionals in the area to discuss problems and solutions, and exchange opinions and experiences.
Timber deals with wide-ranging use of the material in historic buildings, from vaststructural timber-frames through to high-class joinery and simple fixings. Particular attention is paid to how and why timber decays or faults occur, and the methods of assessing and dealing with this. The bulk of the book covers appropriate methods of repair and maintenance.
Wood Deterioration, Protection and Maintenance provides an up to date discussion of the natural durability of wood, wood degradation processes, and methods of structural and chemical protection of wood. Modern active substances in wood preservatives and the relationships between preservative properties, the anatomical structure and moisture content of wood and protective processes involving pressure and/or diffusion driving forces are fully illustrated.
Building pathology provides an interdisciplinary approach to the study of defects and performance in order to develop appropriate remedial and management solutions. It considers how the structure and materials of a building relate to its environment, its occupants and the way the building is used, so as to develop a better understanding of building failures. This book provides a well illustrated introduction to the discipline of building pathology, bridging the gap between current approaches to the surveying of buildings and the detailed study of defect diagnosis, prognosis and remediation. It features a number of case studies and a detailed set of references and further reading. This second edition has been updated to reflect changes in legislation, guidance and construction, and provides new case studies that demonstrate the breadth and depth of the subject.
This book is the second in a series of volumes that combine conservation philosophy in the built environment with knowledge of traditional materials, and structural and constructional conservation techniques and technology: Understanding Historic Building Conservation Structures & Construction in Historic Building Conservation Materials & Skills for Historic Building Conservation The series aims to introduce each aspect of conservation and to provide concise, basic and up-to-date knowledge for architects, surveyors and engineers as well as for commissioning client bodies, managers and advisors. In each book, Michael Forsyth draws together chapters by leading architects, structural engineers and related professionals to reflect the interdisciplinary nature of conservation work. The books are structured to be of direct practical application, taking the reader through the process of historic building conservation and emphasising throughout the integrative teamwork involved. This present volume – Structures & Construction in Historic Building Conservation - traces the history of structures in various materials and contains guidance on the survey, assessment and diagnosis of structures and the integration of building code requirements within the historic fabric. It discusses conservation engineering philosophy, exposes the conflict between building codes and conservation legislation, and offers solutions. Leading-edge, on-site metric survey techniques are described and a range of structural advice is given, including methods of repair in relation to philosophical principles. Causes of induced movement in historic buildings are explained, together with basic soil mechanics and the assessment and diagnosis of structural failure. Chapters also cover the conservation of different types of construction: masonry, iron and steel, and concrete and reinforced concrete. Fourteen chapters written by the experts present today's key issues in structures and construction for historic building conservation: Bill Blake, Michael Bussell, David Cook, Dina F. D'Ayala, Steve Emery, Michael Forsyth, Ian Hume, Peter Norris
