With the progress and rapid increase in mobile terminals, the design of antennas for these small systems is becoming more and more important. This forward-looking volume offers professionals current and comprehensive coverage of the design, development, and implementation of small, compact, and lightweight antennas in mobile communication terminals. The book discusses a wide range of communication systems, from Radio-frequency identification (RFID), and near field communications (NFC), to wireless power transmission (WPT) and broadband wireless networks. Engineers learn how to use small antennas in mobile phones, wearable systems, laptop computers, radio watches, and broadband wireless networks such as WLAN and WiMAX. This definite reference covers the critical applications today’s professionals need to understand, from antennas for IoT and antenna design for 5G mm-wave devices, to body-centric communication systems and antennas for unmanned aerial vehicles.
This book discusses antenna designs for handheld devices as well as base stations. The book serves as a reference and a handy guide for graduate students and PhD students involved in the field of millimeter wave antenna design. It also gives insights to designers and practicing engineers who are actively engaged in design of antennas for future 5G devices. It offers an in-depth study, performance analysis and extensive characterization of novel antennas for 5G applications. The reader will learn about basic design methodology and techniques to develop antennas for 5G applications including concepts of path loss compensation, co-design of commercial 4G antennas with millimeter wave 5G antennas and antennas used in phase array and pattern diversity modules. Practical examples included in the book will help readers to build high performance antennas for 5G subsystems/systems using low cost technology. Key Features Provides simple design methodology of different antennas for handheld devices as well as base stations for 5G applications. Concept of path loss compensation introduced. Co-design of commercial 4G antennas with millimetre wave 5G antennas presented. Comparison of phased array versus pattern diversity modules discussed in detail. Fabrication and Measurement challenges at mmWaves and Research Avenues in antenna designs for 5G and beyond presented. Shiban Kishen Koul is an emeritus professor at the Centre for Applied Research in Electronics at the Indian Institute of Technology Delhi. He served as the chairman of Astra Microwave Products Limited, Hyderabad from 2009-2018. He is a Life Fellow of the Institution of Electrical and Electronics Engineering (IEEE), USA, a Fellow of the Indian National Academy of Engineering (INAE), and a Fellow of the Institution of Electronics and Telecommunication Engineers (IETE). Karthikeya G S worked as an assistant professor in Visvesvaraya technological university from 2013 to 2016 and completed his PhD from the Centre for Applied Research in Electronics at the Indian Institute of Technology Delhi in Dec.2019. He is a member of IEEE-Antenna Propagation Society and Antenna Test and Measurement society.
This exceptional book introduces the reader to the principles, theory and applications of physical layer wireless/mobile communications, applicators and millimetric antennas.
Wireless communications has made a huge leap during the past two decades. The multiple-input-multiple-output (MIMO) technology was proposed in the 1990’s as a viable solution that can overcome the data rate limit experienced by single-input-single-output (SISO) systems. This resource is focused on printed MIMO antenna system design. Printed antennas are widely used in mobile and handheld terminals due to their conformity with the device, low cost, good integration within the device elements and mechanical parts, as well as ease of fabrication. A perfect design companion for practicing engineers, this book provides full design examples from literature, along with detailed illustrations for the various antenna geometries. This resource overviews the various applications that currently depend on printed MIMO antennas, and provides design guidelines and remarks throughout the book for guidance.
This extensively revised and expanded edition of the Artech bestseller Mobile Antenna Systems Handbook puts the very latest technologies, design and analysis procedures, and applications at your command. It features all-new chapters on smart antennas, MIMO systems, and antennas for recently deployed mobile systems such as RFID, UWB, and terrestrial digital TV broadcasting, and provides a wealth of problem-solving guidance for tackling everything from propagation obstacles to SAR safety issues. Like the previous editions, this ultimate one-stop reference is designed to save you a mountain of work. You get hands-on expertise for every type of mobile antenna base station and terminal system, including its theory of operation, application strengths and weaknesses, performance characteristics, design procedures, analysis techniques, and optimization methods, complete with examples and worked-out calculations at every step. The material is further clarified with 567 diagrams, charts, and photos, bringing mobile antenna selection, design, and construction into clear focus. What's more, this resource includes a detailed glossary of antennas and their applications to help you zero in on the right antenna for any job with a flip of the page. From integrating MIMO antennas into handsets, to expanding system capacities with smart antennas, this information-packed resource helps you evaluate design and configuration options, locate crucial data and calculations, perform key analyses, and solve challenges standing in the way of your desired results. It serves as an indispensable reference, helping you design more powerful, versatile, and compact wireless mobile antenna systems.
The most up-to-date, comprehensive treatment of classical and modern antennas and their related technologies Modern Antenna Handbook represents the most current and complete thinking in the field of antennas. The handbook is edited by one of the most recognizable, prominent, and prolific authors, educators, and researchers on antennas and electromagnetics. Each chapter is authored by one or more leading international experts and includes cover-age of current and future antenna-related technology. The information is of a practical nature and is intended to be useful for researchers as well as practicing engineers. From the fundamental parameters of antennas to antennas for mobile wireless communications and medical applications, Modern Antenna Handbook covers everything professional engineers, consultants, researchers, and students need to know about the recent developments and the future direction of this fast-paced field. In addition to antenna topics, the handbook also covers modern technologies such as metamaterials, microelectromechanical systems (MEMS), frequency selective surfaces (FSS), and radar cross sections (RCS) and their applications to antennas, while five chapters are devoted to advanced numerical/computational methods targeted primarily for the analysis and design of antennas.
Expanded and updated, this practical guide is a one-stop design reference containing all an engineer needs when designing antennas Integrates state-of-the-art technologies with a special section for step-by-step antenna design Features up-to-date bio-safety and electromagnetic compatibility regulation compliance and latest standards Newly updated with MIMO antenna design, measurements and requirements Accessible to readers of many levels, from introductory to specialist Written by a practicing expert who has hired and trained numerous engineers
This book presents a comprehensive insight into the design techniques for different types of CP antenna elements and arrays In this book, the authors address a broad range of topics on circularly polarized (CP) antennas. Firstly, it introduces to the reader basic principles, design techniques and characteristics of various types of CP antennas, such as CP patch antennas, CP helix antennas, quadrifilar helix antennas (QHA), printed quadrifilar helix antennas (PQHA), spiral antenna, CP slot antennas, CP dielectric resonator antennas, loop antennas, crossed dipoles, monopoles and CP horns. Advanced designs such as small-size CP antennas, broadband, wideband and ultra-wideband CP antennas are also discussed, as well as multi-band CP antennas and dual CP antennas. The design and analysis of different types of CP array antennas such as broadband CP patch arrays, dual-band CP arrays, CP printed slot arrays, single-band and multi-band CP reflectarrays, high-gain CP waveguide slot antennas, CP dielectric resonator antenna arrays, CP active arrays, millimetre-waveband CP arrays in LTCC, and CP arrays with electronically beam-switching or beam-steering capabilities are described in detail. Case studies are provided to illustrate the design and implementation of CP antennas in practical scenarios such as dual-band Global Navigation Satellite Systems (GNSS) receivers, satellite communication mobile terminals at the S-band, Radio Frequency Identification (RFID) readers at 2.4 GHz, and Ka-band high-speed satellite communication applications. It also includes the detailed designs for a wideband Logarithmic spiral antenna that can operate from 3.4-7.7 GHz. In addition, the book offers a detailed review of the recent developments of different types of CP antennas and arrays. Presents comprehensive discussions of design techniques for different types of CP antennas: small-size CP antennas, broadband CP antennas, multi-band CP antennas and CP arrays. Covers a wide range of antenna technologies such as microstrip antennas, helix, quadrifilar helix antenna, printed quadrifilar helix antenna, dielectric resonator antennas, printed slots, spiral antennas, monopoles, waveguide slot arrays, reflectarrays, active arrays, millimetre-wave arrays in LTCC, electronically beam-switching arrays and electronically beam-steerable arrays. Reviews recent developments in different types of CP antennas and arrays, reported by industries, researchers and academics worldwide. Includes numerous case studies to demonstrate how to design and implement different CP antennas in practical scenarios. Provides both an introduction for students in the field and an in-depth reference for antenna/RF engineers who work on the development of CP antennas. Circularly Polarized Antennas will be an invaluable guide for researchers in R&D organizations; system engineers (antenna, telecom, space and satellite); postgraduates studying the subjects of antenna and propagation, electromagnetics, RF/microwave/millimetre-wave systems, satellite communications and so on; technical managers and professionals in the areas of antennas and propagation.
Offers a comprehensive and practical reference guide to antenna design and engineering for portable devices Antennas are often the most bulky components in many portable wireless devices such as mobile phones. Whilst the demand for ever smaller and more powerful wireless devices increases, as does the importance of designing and engineering smaller antennas to fit these devices. Antennas for Portable Devices provides a complete and cutting-edge guide to the design and engineering of small antennas for portable electronic devices such as mobile phone handsets, laptop computers, RFID (radio frequency identification), microwave thermal therapies devices, wearable devices, and UWB (ultra-wideband) based consumer devices. The book addresses practical engineering issues that antenna professionals have to deal with. It explains the immediate demands for existing systems; discusses the antenna technology for the latest and emerging applications, and gives comprehensive coverage of hot topics in the wireless industry. Issues including design considerations, engineering design, measurement setup and methodology, and practical applications are all covered in depth. Antennas for Portable Devices: Covers antennas for all modern portable wireless devices from handsets, RFID tags, laptops, wearable sensors, UWB-based wireless USB dongles and handheld microwave treatment devices Explains how to design and engineer applications for miniaturization of antenna technology, utilising practical case studies to provide the reader with an understanding of systems and design skills Links the basic antenna theory, with design methodology, and engineering design Is amply illustrated with numerous figures and data tables of antenna designs to aid understanding Features contributions from industry and research experts in antenna technology and applications This invaluable resource will provide a comprehensive overview of miniaturizing antenna technology for antenna engineers in industry, and R&D organizations, graduate students, consultants, researchers, RF professionals, technical managers, as well as practitioners working in the area of consumer electronics, RF systems, wireless communications, or bio-medical devices.
If you are involved in designing and developing small antennas, this complete cutting-edge guide covers everything you need to know. From fundamentals and basic theory to design optimization, evaluation, measurements and simulation techniques, all the essential information is included. You will also get many practical examples from a range of wireless systems, whilst a glossary is provided to bring you up to speed on the latest terminology. A wide variety of small antennas is covered, and design and practice steps are described for each type: electrically small, functionally small, physically constrained small and physically small. Whether you are a professional in industry, a researcher, or a graduate student, this is your essential guide to small antennas.
