Analytical Approaches for Reinforced Concrete presents mathematically-derived theories and equations for RC design and construction. The book applies deductive reasoning, logic and mathematics to RC. Laying out, deductively, the principles of RC, it encourages researchers to re-imagine and innovate using a solid conceptual framework. Sections consider the reasoning behind key theories, as well as problems that remain unsolved. The title presents key ideas in simple language and illustrates them clearly to help the reader grasp difficult concepts and develop a solid foundation, grounded in mathematics, for further study and research. The book is future-oriented, demonstrating theories that are applicable not only to conventional reinforced concrete members, but also to the envisaged structures of tomorrow. Such developments will increasingly require a deep, deductive understanding of RC. This title is the first of its kind, presenting a fresh analytical approach to reinforced concrete design and construction. - Takes an analytical approach to reinforced concrete using mathematics and deduction - Lays out the reasoning behind key theories and models in reinforced concrete design and construction - Encourages researchers-new and established- to re-imagine and innovate using a solid conceptual framework - Presents difficult concepts that are clearly and analytically presented with accompanying illustrations - Looks forward to the use of reinforced concrete in the complex structures of the future
The costs of inadequate earthquake engineering are huge, especially for reinforced concrete buildings. This book presents the principles of earthquake-resistant structural engineering, and uses the latest tools and techniques to give practical design guidance to address single or multiple seismic performance levels. It presents an elegant, simple and theoretically coherent design framework. Required strength is determined on the basis of an estimated yield displacement and desired limits of system ductility and drift demands. A simple deterministic approach is presented along with its elaboration into a probabilistic treatment that allows for design to limit annual probabilities of failure. The design method allows the seismic force resisting system to be designed on the basis of elastic analysis results, while nonlinear analysis is used for performance verification. Detailing requirements of ACI 318 and Eurocode 8 are presented. Students will benefit from the coverage of seismology, structural dynamics, reinforced concrete, and capacity design approaches, which allows the book to be used as a foundation text in earthquake engineering.
This book covers the analysis and design of reinforced concrete elements in foundations and superstructures in a logical, step-by-step fashion. The theory of reinforced concrete and the derivation of the code formulae have been clearly explained. The text is backed up by numerous illustrations, design charts and tables referring frequently to the relevant codes of practice. A large number of worked examples cover almost all types of reinforced concrete elements. The step-by-step approach will ensure that all design requirements are logically adhered to, a standardized approach is established in a design office and that a simplified procedure for checking and for quality assurance can be implemented.
This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.
A PRACTICAL GUIDE TO REINFORCED CONCRETE STRUCTURE ANALYSIS AND DESIGN Reinforced Concrete Structures explains the underlying principles of reinforced concrete design and covers the analysis, design, and detailing requirements in the 2008 American Concrete Institute (ACI) Building Code Requirements for Structural Concrete and Commentary and the 2009 International Code Council (ICC) International Building Code (IBC). This authoritative resource discusses reinforced concrete members and provides techniques for sizing the cross section, calculating the required amount of reinforcement, and detailing the reinforcement. Design procedures and flowcharts guide you through code requirements, and worked-out examples demonstrate the proper application of the design provisions. COVERAGE INCLUDES: Mechanics of reinforced concrete Material properties of concrete and reinforcing steel Considerations for analysis and design of reinforced concrete structures Requirements for strength and serviceability Principles of the strength design method Design and detailing requirements for beams, one-way slabs, two-way slabs, columns, walls, and foundations
Reinforced Concrete Design: A Practical Approach, 2E is the only Canadian textbook which covers the design of reinforced concrete structural members in accordance with the CSA Standard A23.3-04 Design of Concrete Structures, including its 2005, 2007, and 2009 amendments, and the National Building Code of Canada 2010. Reinforced Concrete Design: A Practical Approach covers key topics for curriculum of undergraduate reinforced concrete design courses, and it is a useful learning resource for the students and a practical reference for design engineers. Since its original release in 2005 the book has been well received by readers from Canadian universities, colleges, and design offices. The authors have been commended for a simple and practical approach to the subject by students and course instructors. The book contains numerous design examples solved in a step-by-step format. The second edition is going to be available exclusively in hard cover version, and colours have been used to embellish the content and illustrations. This edition contains a new chapter on the design of two-way slabs and numerous revisions of the original manuscript. Design of two-way slabs is a challenging topic for engineering students and young engineers. The authors have made an effort to give a practical design perspective to this topic, and have focused on analysis and design approaches that are widely used in structural engineering practice. The topics include design of two-way slabs for flexure, shear, and deflection control. Comprehensive revisions were made to Chapter 4 to reflect the changes contained in the 2009 amendment to CSA A23.3-04. Chapters 6 and 7 have been revised to correct an oversight related to the transverse reinforcement spacing requirements in the previous edition of the book. Chapter 8 includes a new design example on slender columns and a few additional problems. Several errors and omissions (both text and illustrations) have also been corrected. More than 300 pages of the original book have been revised in this edition. Several supplements are included on the book web site. Readers will get time-limited access to the new column design software BPA COLUMN, which can generate column interaction diagrams for rectangular and cicrcular columns of variable dimensions and reinforcement amount. Additional supplements include spreadsheets related to foundation design and column load take down, and a few Power Point presentations showcasing reinforced concrete structures under construction and in completed form. Instructors will have an access to additional web site, which contains electronic version of the Instructor's Solution Manual with complete solutions to the end-of-chapter problems, and Power Point presentations containing all illustrations from the book. The book is a collaborative effort between an academic and a practising engineer and reflects their unique perspectives on the subject. Svetlana Brzev, Ph.D., P.Eng. is a faculty at the Civil Engineering Department of the British Columbia Institute of Technology, Burnaby, BC. She has over 25 years of combined teaching, research, and consulting experience related to structural design and rehabilitation of concrete and masonry structures, including buildings, municipal, and industrial facilities. John Pao, MEng, PEng, Struct.Eng, is the President of Bogdonov Pao Associates Ltd. of Vancouver, BC, and BPA Group of Companies with offices in Seattle and Los Angeles. Mr. Pao has extensive consulting experience related to design of reinforced concrete buildings, including high-rise residential and office buildings, shopping centers, parking garages, and institutional buildings.
The Proceedings of the NATO Advanced Study Institute on Analysis and Design of Bridges held at ~e§me, lzmir, Turkey from 28 June 1982 to 9 July 1982 are contained in the present volume. The Advanced Study Institute was attended by 37 lecturers and participants from 10 different countries. The Organizing Committee consisted of Professors P. Gtilkan, A. C. Scordelis, S. T. Wasti and 9. Yl. lmaz. The guidelines set by NATO for the Advanced Study Institute require it to serve not only as an efficient forum for the dissemination of available advanced knowledge to a selected group of qualified people but also as a platform for the exploration of future research possibilities in the scientific or engineering areas concerned. The main topics covered by the present Advanced Study Institute were the mathematical modelling of bridges for better analysis and the scientific assessment of bridge behaviour for the introduction of improved design procedures. It has been our observation that as a result of the range and depth of the lectures presented and the many informal discussions that took place, ideas became fissile, the stimulus never flagged and many gaps in the engineering knowledge of the participants were "bridged". Here we particularly wish to mention that valuable informal presenta tions of research work were made during the course of the Institute by Drs. Friedrich, Karaesmen, Lamas and Parker.
Using interdisciplinary approaches to strategic management can strengthen the decision making process. Incorporating various methods will also encourage productivity, expand knowledge of participants, and increase technical proficiency. Analytical Approaches to Strategic Decision-Making: Interdisciplinary Considerations aims to integrate different techniques into the worlds fast-changing and dynamic society to better equip all readers and practitioners with the most effective knowledge. Managers, CEOs, researchers, and academics in the fields of business and leadership will all benefit from this valuable resource through an enhanced understanding of best practices in decision-making and management.
