"This publication represents the views and expert opinions of an IARC Working Group on the Evaluation of Carcinogenic Risk to Humans, which met in Lyon, 8-15 October 2013."
The main objective of these updated global guidelines is to offer health-based air quality guideline levels, expressed as long-term or short-term concentrations for six key air pollutants: PM2.5, PM10, ozone, nitrogen dioxide, sulfur dioxide and carbon monoxide. In addition, the guidelines provide interim targets to guide reduction efforts of these pollutants, as well as good practice statements for the management of certain types of PM (i.e., black carbon/elemental carbon, ultrafine particles, particles originating from sand and duststorms). These guidelines are not legally binding standards; however, they provide WHO Member States with an evidence-informed tool, which they can use to inform legislation and policy. Ultimately, the goal of these guidelines is to help reduce levels of air pollutants in order to decrease the enormous health burden resulting from the exposure to air pollution worldwide.
The book covers the three largest sources of particulate matter pollution in five chapters. These sources constitute three of the top ten public health problems in the world today and far outstrip any other environmental health threats in terms of health impact. The book begins with indoor solid fuel combustion for cooking in lower income countries and tells the story of how this problem was identified and recent efforts to eliminate it. The book next looks at tobacco smoking and second hand smoke, again reviewing the history of how these problems were identified scientifically and the fierce industry push back against the science. The last two chapters cover ambient particulate matter in the outdoor air. They address fine and ultrafine particles, describing the pioneering work on fine PM, the subsequent industry attacks on the scientists and then the emerging interest and concern about ultrafine particles, an area of research in which the author has participated. This book is geared towards non-scientists, including high school and college students.
This book presents revised guideline values for the four most common air pollutants - particulate matter, ozone, nitrogen dioxide and sulfur dioxide - based on a recent review of the accumulated scientific evidence. The rationale for selection of each guideline value is supported by a synthesis of information emerging from research on the health effects of each pollutant. As a result, these guidelines now also apply globally. They can be read in conjunction with Air quality guidelines for Europe, 2nd edition, which is still the authority on guideline values for all other air pollutants. As well as revised guideline values, this book makes a brief yet comprehensive review of the issues affecting the application of the guidelines in risk assessment and policy development. Further, it summarizes information on: . pollution sources and levels in various parts of the world, . population exposure and characteristics affecting sensitivity to pollution, . methods for quantifying the health burden of air pollution, and . the use of guidelines in developing air quality standards and other policy tools. Finally, the special case of indoor air pollution is explored. Prepared by a large team of renowned international experts who considered conditions in various parts of the globe, these guidelines are applicable throughout the world. They provide reliable guidance for policy-makers everywhere when considering the various options for air quality management.
This book presents WHO guidelines for the protection of public health from risks due to a number of chemicals commonly present in indoor air. The substances considered in this review, i.e. benzene, carbon monoxide, formaldehyde, naphthalene, nitrogen dioxide, polycyclic aromatic hydrocarbons (especially benzo[a]pyrene), radon, trichloroethylene and tetrachloroethylene, have indoor sources, are known in respect of their hazardousness to health and are often found indoors in concentrations of health concern. The guidelines are targeted at public health professionals involved in preventing health risks of environmental exposures, as well as specialists and authorities involved in the design and use of buildings, indoor materials and products. They provide a scientific basis for legally enforceable standards.
The U.S. Environmental Protection Agency (EPA) defines PM as a mixture of extremely small particles and liquid droplets comprising a number of components, including "acids (such as nitrates and sulfates), organic chemicals, metals, soil or dust particles, and allergens (such as fragments of pollen and mold spores)". The health effects of outdoor exposure to particulate matter (PM) are the subject of both research attention and regulatory action. Although much less studied to date, indoor exposure to PM is gaining attention as a potential source of adverse health effects. Indoor PM can originate from outdoor particles and also from various indoor sources, including heating, cooking, and smoking. Levels of indoor PM have the potential to exceed outdoor PM levels. Understanding the major features and subtleties of indoor exposures to particles of outdoor origin can improve our understanding of the exposureâ€"response relationship on which ambient air pollutant standards are based. The EPA's Indoor Environments Division commissioned the National Academies of Sciences, Engineering, and Medicine to hold a workshop examining the issue of indoor exposure to PM more comprehensively and considering both the health risks and possible intervention strategies. Participants discussed the ailments that are most affected by particulate matter and the attributes of the exposures that are of greatest concern, exposure modifiers, vulnerable populations, exposure assessment, risk management, and gaps in the science. This report summarizes the presentations and discussions from the workshop.
The emergence of severe acute respiratory syndrome (SARS) in late 2002 and 2003 challenged the global public health community to confront a novel epidemic that spread rapidly from its origins in southern China until it had reached more than 25 other countries within a matter of months. In addition to the number of patients infected with the SARS virus, the disease had profound economic and political repercussions in many of the affected regions. Recent reports of isolated new SARS cases and a fear that the disease could reemerge and spread have put public health officials on high alert for any indications of possible new outbreaks. This report examines the response to SARS by public health systems in individual countries, the biology of the SARS coronavirus and related coronaviruses in animals, the economic and political fallout of the SARS epidemic, quarantine law and other public health measures that apply to combating infectious diseases, and the role of international organizations and scientific cooperation in halting the spread of SARS. The report provides an illuminating survey of findings from the epidemic, along with an assessment of what might be needed in order to contain any future outbreaks of SARS or other emerging infections.
This study represents the latest in a series of research activities aimed at a better understanding of the origin and fate of air pollution within the built environment. Most previous studies of air pollution in cultural institutions have focused on gases. Particles were ignored for many reasons: they seemed to be more easily removed by the building; gaseous air pollutants had been well studied by industry, and their effects on commercial products were heavily documented; and many particle types were considered chemically benign to almost all surfaces. Even carbon black, which is now known to pose enormous degradation risks to the optical and color qualities of paintings and tapestries, is almost totally inert. Recognizing this, and understanding that we needed to know much more about the physics of particle intrusion in museum buildings, in 1987 the Environmental Engineering Lab at the California Institute of Technology, under contract to the Getty Conservation Institute, began a detailed examination of five different museums in Southern California. These structures represent a diverse range of architectural and ventilation types. Through this study a powerful computer model was developed that could predict the soiling effects of changes made to the operation or maintenance of a building. This model can even be used to estimate the soiling rates of new buildings or major rehabilitations before any construction work is begun. This is an important contribution to both the conservation community and the broader field of air quality science.
Recent advances in air pollution monitoring and modeling capabilities have made it possible to show that air pollution can be transported long distances and that adverse impacts of emitted pollutants cannot be confined to one country or even one continent. Pollutants from traffic, cooking stoves, and factories emitted half a world away can make the air we inhale today more hazardous for our health. The relative importance of this "imported" pollution is likely to increase, as emissions in developing countries grow, and air quality standards in industrial countries are tightened. Global Sources of Local Pollution examines the impact of the long-range transport of four key air pollutants (ozone, particulate matter, mercury, and persistent organic pollutants) on air quality and pollutant deposition in the United States. It also explores the environmental impacts of U.S. emissions on other parts of the world. The book recommends that the United States work with the international community to develop an integrated system for determining pollution sources and impacts and to design effective response strategies. This book will be useful to international, federal, state, and local policy makers responsible for understanding and managing air pollution and its impacts on human health and well-being.