The 2nd volume of 'Advances in Microelectronics: Reviews' Book Series is written by 57 contributors from academy and industry from 11 countries (Bulgaria, Hungary, Iran, Japan, Malaysia, Romania, Russia, Slovak Republic, Spain, Ukraine and USA). The book contains 13 chapters from different areas of microelectronics: MEMS, materials characterization, and various microelectronic devices. With unique combination of information in each volume, the Book Series will be of value for scientists and engineers in industry and at universities. Each of chapter is ending by well selected list of references with books, journals, conference proceedings and web sites. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
The 1st volume of 'Advances in Microelectronics: Reviews' Book Series contains 19 chapters written by 72 authors from academia and industry from 16 countries. With unique combination of information in each volume, the 'Advances in Microelectronics: Reviews' Book Series will be of value for scientists and engineers in industry and at universities. In order to offer a fast and easy reading of the state of the art of each topic, every chapter in this book is independent and self-contained. All chapters have the same structure: first an introduction to specific topic under study; second particular field description including sensing applications. Each of chapter is ending by well selected list of references with books, journals, conference proceedings and web sites. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
With the ever-increasing amount of research being published it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in may subjects representing the field of adhesion science and adheisves. Based on the success and the warm reception accorded to the premier volume in this series “Progress in Adhesion and Adhesives” (containing the review articles published in Volume 2 (2014) of the journal Reviews of Adhesion and Adhesives (RAA)), volume 2 comprises 14 review articles published in Volume 4 (2016) of RAA. The subjects of these 14 reviews fall into the following general areas: 1. Surface modification of polymers for a variety of purposes. 2. Adhesion aspects in reinforced composites 3. Thin films/coatings and their adhesion measurement 4. Bioadhesion and bio-implants 5. Adhesives and adhesive joints 6. General adhesion aspects The topics covered include: surface modification of natural fibers for reinforced polymer composites; adhesion of submicrometer thin metals films; surface treatments to modulate bioadhesion; hot-melt adhesives from renewable resources; particulate-polymer composites; functionally graded adhesively bonded joints; fabrication of nano-biodevices; effects of particulates on contact angles , thermal stresses in adhesively bonded joints and ways to mitigate these; laser-assisted electroless metallization of polymer materials; adhesion measurement of coatings on biodevices/implants; cyanoacrylate adhesives; and adhesion of green flame retardant coatings onto polyolefins.
Avoiding Inelastic Strains in Solder Joint Interconnections of IC Devices addresses analytical (mathematical) modeling approaches aimed at understanding the underlying physics and mechanics of the behavior and performance of solder materials and solder joint interconnections of IC devices. The emphasis is on design for reliability, including probabilistic predictions of the solder lifetime. Describes how to use the developed methods of analytical predictive modeling to minimize thermal stresses and strains in solder joint of IC devices Shows how to build the preprocessing models in finite-element analyses (FEA) by comparing the FEA and analytical data Covers how to design the most effective test vehicles for testing solder joints Details how to design and organize, in addition to or sometimes even instead of highly accelerated life tests (HALT), highly focused and highly cost-effective failure oriented accelerated testing (FOAT) to understand the physic of failure of solder joint interconnections Outlines how to convert the low cycle fatigue conditions into elastic fatigue conditions and to assess the fatigue lifetime in such cases Illustrates ways to replace time- and labor-consuming, expensive, and possibly misleading temperature cycling tests with simpler and physically meaningful accelerated tests This book is aimed towards professionals in electronic and photonic packaging, electronic and optical materials, materials engineering, and mechanical design.
The fourth volume titled 'Sensors and Applications in Measuring and Automation Control Systems' contains twenty four chapters with sensor related state-of-the-art reviews and descriptions of latest advances in sensor related area written by 81 authors from academia and industry from 5 continents and 20 countries: Australia, Austria, Brazil, Finland, France, Japan, India, Iraq, Italia, México, Morocco, Portugal, Senegal, Serbia, South Africa, South Korea, Spain, UK, Ukraine and USA. Coverage includes current developments in physical sensors and transducers, chemical sensors, biosensors, sensing materials, signal conditioning, energy harvesters and sensor networks.
To celebrate Professor Avi Bar-Cohen's 65th birthday, this unique volume is a collection of recent advances and emerging research from various luminaries and experts in the field. Cutting-edge technologies and research related to thermal management and thermal packaging of micro- and nanoelectronics are covered, including enhanced heat transfer, heat sinks, liquid cooling, phase change materials, synthetic jets, computational heat transfer, electronics reliability, 3D packaging, thermoelectrics, data centers, and solid state lighting.This book can be used by researchers and practitioners of thermal engineering to gain insight into next generation thermal packaging solutions. It is an excellent reference text for graduate-level courses in heat transfer and electronics packaging.
This book contains extended version of selected works that have been discussed and presented in the fourth International Doctoral Symposium on Applied Computation and Security Systems (ACSS 2017) held in Patna, India during March 17-19, 2017. The symposium was organized by the Departments of Computer Science & Engineering and A. K. Choudhury School of Information Technology, both from University of Calcutta in collaboration with NIT, Patna. The International partners for ACSS 2016 had been Ca Foscari University of Venice, Italy and Bialystok University of Technology, Poland. This bi-volume book has a total of 21 papers divided in 7 chapters. The chapters reflect the sessions in which the works have been discussed during the symposium. The different chapters in the book include works on biometrics, image processing, pattern recognition, algorithms, cloud computing, wireless sensor networks and security systems.
Microelectronics is a complex world where many sciences need to collaborate to create nano-objects: we need expertise in electronics, microelectronics, physics, optics and mechanics also crossing into chemistry, electrochemistry, as well as biology, biochemistry and medicine. Chemistry is involved in many fields from materials, chemicals, gases, liquids or salts, the basics of reactions and equilibrium, to the optimized cleaning of surfaces and selective etching of specific layers. In addition, over recent decades, the size of the transistors has been drastically reduced while the functionality of circuits has increased. This book consists of five chapters covering the chemicals and sequences used in processing, from cleaning to etching, the role and impact of their purity, along with the materials used in “Front End Of the Line” which corresponds to the heart and performance of individual transistors, then moving on to the “Back End Of the Line” which is related to the interconnection of all the transistors. Finally, the need for specific functionalization also requires key knowledge on surface treatments and chemical management to allow new applications. Contents 1. Chemistry in the “Front End of the Line” (FEOL): Deposits, Gate Stacks, Epitaxy and Contacts, François Martin, Jean-Michel Hartmann, Véronique Carron and Yannick Le Tiec. 2. Chemistry in Interconnects, Vincent Jousseaume, Paul-Henri Haumesser, Carole Pernel, Jeffery Butterbaugh, Sylvain Maîtrejean and Didier Louis. 3. The Chemistry of Wet Surface Preparation: Cleaning, Etching and Drying, Yannick Le Tiec and Martin Knotter. 4. The Use and Management of Chemical Fluids in Microelectronics, Christiane Gottschalk, Kevin Mclaughlin, Julie Cren, Catherine Peyne and Patrick Valenti. 5. Surface Functionalization for Micro- and Nanosystems: Application to Biosensors, Antoine Hoang, Gilles Marchand, Guillaume Nonglaton, Isabelle Texier-Nogues and Francoise Vinet. About the Authors Yannick Le Tiec is a technical expert at CEA-Leti, Minatec since 2002. He is a CEA-Leti assignee at IBM, Albany (NY) to develop the advanced 14 nm CMOS node and the FDSOI technology. He held different technical positions from the advanced 300 mm SOI CMOS pilot line to different assignments within SOITEC for advanced wafer development and later within INES to optimize solar cell ramp-up and yield. He has been part of the ITRS Front End technical working group at ITRS since 2008.
The topic of thin films is an area of increasing importance in materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices. Advanced, high-performance computers, high-definition TV, broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are a few examples of the miniaturized device technologies that depend on the utilization of thin film materials. This book presents an in-depth overview of the novel developments made by the scientific leaders in the area of modern dielectric films for advanced microelectronic applications. It contains clear, concise explanations of material science of dielectric films and their problem for device operation, including high-k, low-k, medium-k dielectric films and also specific features and requirements for dielectric films used in the packaging technology. A broad range of related topics are covered, from physical principles to design, fabrication, characterization, and applications of novel dielectric films.
Liquid crystal technology is a subject of many advanced areas of science and engineering. It is commonly associated with liquid crystal displays applied in calculators, watches, mobile phones, digital cameras, monitors etc. But nowadays liquid crystals find more and more use in photonics, telecommunications, medicine and other fields. The goal of this book is to show the increasing importance of liquid crystals in industrial and scientific applications and inspire future research and engineering ideas in students, young researchers and practitioners.
