Numerical Simulation of Two-phase Gas-liquid Flows in Inclined and Vertical Pipelines

Numerical Simulation of Two-phase Gas-liquid Flows in Inclined and Vertical Pipelines

Author:

Publisher:

Published: 2006

Total Pages:

ISBN-13:

DOWNLOAD EBOOK

The present thesis describes the advances made in modelling two-phase flows in inclined pipes using a transient one-dimensional approach. The research is a developement of an existing numerical methodology, capable of simulating stratified and slugging two-phase flows in horizontal or inclined single pipes. The aim of the present work is to extend the capabilities of the approach in order (i) to account for the effect of the pipe topography in the numerical solution of the two-fluid model, and (ii) to simulate vertical bubbly twophase flows at various pressures in large diameter pipes, and (iii) to model stratified and terrain-induced slugging in two-phase flow pipelines made of several uphill, downhill and level sections. A transient compressible two-fluid model based on the one-dimensional form of the mass and momentum conservation equations for the gas and liquid phases, is developed to predict those flow configurations. The wall to fluid and the interphase interactions are accounted for by constitutive relations which are flow regime dependent. The conservation equations are discretized using a finite volume method. An algorithm is created to enable simulations on pipelines made of several sections, and account for the effect of the topography in the simulations. The methodology is applied to the compressible model in order to evaluate the robustness and accuracy of the numerical schemes, especially for the high-resolution Advection Upwinding Splitting Method (AUSM) associated to the compressible model. It also assesses the ability of the method to predict three physical flow regimes, namely stratified, bubbly and terrain-induced slug flows. The terrain-induced slugging study is performed on a slightly inclined ("1.5°) V-section system. The use of hydrodynamic slug correlations for hilly-terrain slugging is discussed. It shows to be conclusive with a good agreement with experimental measurements obtained for slug frequency and slug length predictions. Mechanisms.


Proceedings of the International Petroleum and Petrochemical Technology Conference 2019

Proceedings of the International Petroleum and Petrochemical Technology Conference 2019

Author: Jia'en Lin

Publisher: Springer Nature

Published: 2019-12-16

Total Pages: 501

ISBN-13: 9811508607

DOWNLOAD EBOOK

This book is a compilation of selected papers from the 3rd International Petroleum and Petrochemical Technology Conference (IPPTC 2019). The work focuses on petroleum & petrochemical technologies and practical challenges in the field. It creates a platform to bridge the knowledge gap between China and the world. The conference not only provides a platform to exchanges experience but also promotes the development of scientific research in petroleum & petrochemical technologies. The book will benefit a broad readership, including industry experts, researchers, educators, senior engineers and managers.


Encyclopedia Of Two-phase Heat Transfer And Flow I: Fundamentals And Methods (A 4-volume Set)

Encyclopedia Of Two-phase Heat Transfer And Flow I: Fundamentals And Methods (A 4-volume Set)

Author: John R Thome

Publisher: World Scientific

Published: 2015-08-14

Total Pages: 1109

ISBN-13: 9814623229

DOWNLOAD EBOOK

The aim of the two-set series is to present a very detailed and up-to-date reference for researchers and practicing engineers in the fields of mechanical, refrigeration, chemical, nuclear and electronics engineering on the important topic of two-phase heat transfer and two-phase flow. The scope of the first set of 4 volumes presents the fundamentals of the two-phase flows and heat transfer mechanisms, and describes in detail the most important prediction methods, while the scope of the second set of 4 volumes presents numerous special topics and numerous applications, also including numerical simulation methods.Practicing engineers will find extensive coverage to applications involving: multi-microchannel evaporator cold plates for electronics cooling, boiling on enhanced tubes and tube bundles, flow pattern based methods for predicting boiling and condensation inside horizontal tubes, pressure drop methods for singularies (U-bends and contractions), boiling in multiport tubes, and boiling and condensation in plate heat exchangers. All of these chapters include the latest methods for predicting not only local heat transfer coefficients but also pressure drops.Professors and students will find this 'Encyclopediaa of Two-Phase Heat Transfer and Flow' particularly exciting, as it contains authored books and thorough state-of-the-art reviews on many basic and special topics, such as numerical modeling of two-phase heat tranfser and adiabatic bubbly and slug flows, the unified annular flow boiling model, flow pattern maps, condensation and boiling theories, new emerging topics, etc.


Computational Methods in Multiphase Flow VII

Computational Methods in Multiphase Flow VII

Author: C. A. Brebbia

Publisher: WIT Press

Published: 2013-07-03

Total Pages: 557

ISBN-13: 1845647343

DOWNLOAD EBOOK

Multiphase flows are found in all areas of technology, at all length scales and flow regimes and can involve compressible or incompressible linear or nonlinear, fluids. However, although they are ubiquitous, multiphase flows continue to be one of the most challenging areas of computational mechanics, with numerous problems as yet unsolved. Advanced computational and experimental methods are often required to solve the equations that describe such complex problems. The many challenges that must be faced in solving them include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterising phase structures, and treating drop break-up and coalescence. It is important to validate models, which calls for the use of expensive and difficult experimental techniques.This book presents contributions on the latest research in the techniques for solving multiphase flow problems, presented at the seventh in a biennial series of conferences on the subject that began in 2001. Featured topics include: Flow in porous media; Turbulent flow; Multiphase flow simulation; Image processing; Heat transfer; Atomization; Interface behaviour; Oil and gas applications; Experimental measurements; Energy applications; Biological flows; Micro and macro fluids; Compressible flows.


Flow-induced Vibration

Flow-induced Vibration

Author: Robert D. Blevins

Publisher:

Published: 2001-01-01

Total Pages: 477

ISBN-13: 9781575241838

DOWNLOAD EBOOK

Focuses on applications for offshore platforms and piping; and, wind-induced vibration of buildings, bridges, and towers. This title also focuses on acoustic and mechanical vibration of heat exchangers, power lines, and process ducting.