A Review of Bending Methods for Stainless Steel Tubing
Author: C. T. Olofson
Publisher:
Published: 1961
Total Pages: 66
ISBN-13:
DOWNLOAD EBOOKPosts
The Application of Ultrasonic Energy in the Deformation of Metals
Author: Alan R. Rosenfield
Publisher:
Published: 1963
Total Pages: 88
ISBN-13:
DOWNLOAD EBOOKOn June 21 a symposium was sponsored by the Bureau of Naval Weapons on the application of ultrasonic energy in the deformation of metals. At this session, a number of investigators actively working in the field reported informally on the results of their research. The reports revealed that the results achieved by incorporating ultrasonic transducers into conventional metalforming and-cutting operations are sufficiently promising that the technique merits further attention. Data are available to indicate that application of ultrasonic vibrations during metal working can increase speeds, lower forces, and improve surface finishes. All of these results have been obtained without any observed difference in properties between ultrasonically and conventionally fabricated parts. (Author).
The Mechanical Properties of the 18 Per Cent Nickel Maraging Steels
Author: J. E. Campbell
Publisher:
Published: 1964
Total Pages: 136
ISBN-13:
DOWNLOAD EBOOKSince the combination of tensile properties and toughness that can be obtained with the maraging steels is higher than can be achieved with other steels by simple heat treatments, there is considerable interest in using the maraging steels for critical components such as rocket motor cases, pressure vessels, and aircraft forgings. This report includes information on the tensile, compressive, shear, bearing, dynamic modulus, impact, bend, fatigue, creep, and rupture properties of the 18 per cent nickel maraging steels and on the effect of temperature on these properties. Data for the properties of sheet, bar, and forgings, as well as data illustrating the effect of cold rolling, variation in the heat treatment, and elevated-temperature exposure also are presented. Data on the effect of specimen orientation, which are also included, indicate that the ductility and toughness of specimens designed to evaluate the properties in the short transverse direction are somewhat lower than in the other directions. The high strength and toughness that can be obtained in the 18 per cent nickel maraging steels make them attractive for certain critical applications that require these properties. The fabrication characteristics, weldability, and simple heat treatment are other advantages of these steels. (Author).
Properties of Coated Refractory Metals
Author: W. A. Gibeaut
Publisher:
Published: 1964
Total Pages: 104
ISBN-13:
DOWNLOAD EBOOKThis report summarizes the information generated since the middle of 1961 on the chemical, physical, and mechanical properties of refractory metals that are coated with oxidation-resistant coatings of advanced-experimental or commercial status. It is a supplement to DMIC Report 162, Coatings for the Protection of Refractory Metals from Oxidation, dated November 24, 1961. Recent data on specific silicide- and aluminide- type coatings for columbium, molybdenum, tantalum, and tungsten and their alloys reflect general advances in coating quality and performance, understanding of the behavior of coated systems, and more complete realization of the problems associated with the use of coated hardware.
The Engineering Properties of Tantalum and Tantalum Alloys
Author: F. F. Schmidt
Publisher:
Published: 1963
Total Pages: 134
ISBN-13:
DOWNLOAD EBOOKThis report presents the results of a state-of-the-art survey covering tantalum and seven of its alloys. All data are given in tabular and graphical form covering some of the more important physical, mechanical, and metallurgical properties for each material. References are given at the conclusion of each material section.
The Engineering Properties of Molybdenum and Molybdenum Alloys
Author: F. F. Schmidt
Publisher:
Published: 1963
Total Pages: 310
ISBN-13:
DOWNLOAD EBOOKThe Engineering Properties of Columbium and Columbium Alloys
Author: F. F. Schmidt
Publisher:
Published: 1963
Total Pages: 264
ISBN-13:
DOWNLOAD EBOOKThe results of a state-of-the-art survey covering niobium and 18 of its most promising alloys are presented. All data are given in tabular and graphical form covering some of the more important physical, mechanical, and metallurgical properties for each material. References are given at the conclusion of each material section.
The Engineering Properties of Tungsten and Tungsten Alloys
Author: F. F. Schmidt
Publisher:
Published: 1963
Total Pages: 154
ISBN-13:
DOWNLOAD EBOOKThe results of a state-of-the-art survey covering tungsten and ten of its alloys are presented. All data are given in tabular and graphical form covering some of the more important physical, mechanical, and metallurgical properties for each material. References are given at the conclusion of each material section.
The Effect of Fabrication History and Microstructure on the Mechanical Properties of Refractory Metals and Alloys
Author: Albert G. Imgram
Publisher:
Published: 1963
Total Pages: 80
ISBN-13:
DOWNLOAD EBOOKThis report summarizes the present knowledge concerning the relationship among fabrication history, metallurgical structure, and the mechanical properites of the refractory metals columbium, tantalum, bolybdenum, and tungsten, and their alloys. These are the refractory metals currently reveiveing the most attention for aerospace applications, and are therefore the materials considered in this survey. The report is organized into three main sections, titled ''Fabrication'', ''Microstructure and Alloying'', and ''Interstitial Impurities''. The data presented were selected as those which best illustrate the topics discussed. Descriptions of the metaljurgical principles involved are included. Suggestions for optimizing mechanical properties by controlling metallurgical structure are made where possible. (Author).
Statistical Analysis of Tensile Properties of Heat-treated Ti-4A1-3Mo-1V and Ti-2.5A1-16V Sheet
Author: G. H Beatty
Publisher:
Published: 1961
Total Pages: 54
ISBN-13:
DOWNLOAD EBOOKIN THE SOLUTION TREATED AND AGED CONDITION, Ti4Al-3Mo-1V has a higher ultimate strength than does Ti-2.5Al-16V, but the two alloys are about even in yield strength and elongation. In the solution-treated condition, Ti-4Al-3Mo-1V is unquestionably stronger than Ti-2.5Al-16V. These conclusions are independent of producer. There is not much difference in the same alloy produced by different companies. The alloys developed under the Titanium-Alloy Sheet-Rolling Program would not endure the most critical interpretation of release property specifications. On the other hand, these alloys come reasonably close to specifications. A complete set of release property specifications is available only for specimens that have been solution treated and aged. Such specimens do not all exhibit the desired ultimate and yield strength, but the percentage of rejects is small enough to be encouraging. (Author).
