In the era of digital technologies many field- geologists still find it difficult to dismiss the analogical instrumentation they usually employ in their outdoor activities. They are still bound to paper maps and coloured pencils for collecting and recording data. This book is devoted to those geologists looking for an help to make a step in the digital era and take advance of all benefits of new technologies. The book is written as a technical manual and covers with an high level of detail the whole workflow from data schematization to result dissemination. The steps involved cover the analysis of to-be-collected information, the choice of most suitable hardware, the adoption and customization of software, the on-field best practices, the office data reworking, the 2D geological map dissemination and, as the final glimpse, the data transfer to 3D modelling environments. Most of the suggested software is either open source or freeware. Commercial software is used just where no adequate free tool is available for the specific purpose.
"Field instruction has traditionally been at the core of the geoscience curriculum. The field experience has been integral to the professional development of future geoscientists, and is particularly important as it applies to student understanding of spatial, temporal, and complex relations in the Earth system. As important as field experiences have been to geosciences education and the training of geoscientists, the current situation calls for discipline-wide reflection of the role of field experiences in the geoscience curriculum in light of practical and logistical challenges, evolution in employment opportunities for geoscientists, and changing emphases in the geoscience curriculum. This volume seeks to broaden participation in field instruction by showcasing diverse approaches to teaching in the field across the many geo-disciplines encompassed by GSA."--books.google.
3D DIGITAL GEOLOGICAL MODELS Discover the practical aspects of modeling techniques and their applicability on both terrestrial and extraterrestrial structures A wide overlap exists in the methodologies used by geoscientists working on the Earth and those focused on other planetary bodies in the Solar System. Over the course of a series of sessions at the General Assemblies of the European Geosciences Union in Vienna, the intersection found in 3D characterization and modeling of geological and geomorphological structures for all terrestrial bodies in our solar system revealed that there are similar datasets and common techniques for the study of all planets—Earth and beyond—from a geological point-of-view. By looking at Digital Outcrop Models (DOMs), Digital Elevation Models (DEMs), or Shape Models (SM), researchers may achieve digital representations of outcrops, topographic surfaces, or entire small bodies of the Solar System, like asteroids or comet nuclei. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces has two central objectives, to highlight the similarities that geological disciplines have in common when applied to entities in the Solar System, and to encourage interdisciplinary communication and collaboration between different scientific communities. The book particularly focuses on analytical techniques on DOMs, DEMs and SMs that allow for quantitative characterization of outcrops and geomorphological features. It also highlights innovative 3D interpretation and modeling strategies that allow scientists to gain new and more advanced quantitative results on terrestrial and extraterrestrial structures. 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces readers will also find: The first volume dedicated to this subject matter that successfully integrates methodology and applications A series of methodological chapters that provide instruction on best practices involving DOMs, DEMs, and SMs A wide range of case studies, including small- to large-scale projects on Earth, Mars, the 67P/Churyumov-Gerasimenko comet, and the Moon Examples of how data collected at surface can help reconstruct 3D subsurface models 3D Digital Geological Models: From Terrestrial Outcrops to Planetary Surfaces is a useful reference for academic researchers in earth science, structural geology, geophysics, petroleum geology, remote sensing, geostatistics, and planetary scientists, and graduate students studying in these fields. It will also be of interest for professionals from industry, particularly those in the mining and hydrocarbon fields.
Digital Terrain Analysis in Soil Science and Geology, Second Edition, synthesizes the knowledge on methods and applications of digital terrain analysis and geomorphometry in the context of multi-scale problems in soil science and geology. Divided into three parts, the book first examines main concepts, principles, and methods of digital terrain modeling. It then looks at methods for analysis, modeling, and mapping of spatial distribution of soil properties using digital terrain analysis, before finally considering techniques for recognition, analysis, and interpretation of topographically manifested geological features. Digital Terrain Analysis in Soil Science and Geology, Second Edition, is an updated and revised edition, providing both a theoretical and methodological basis for understanding and applying geographical modeling techniques. Presents an integrated and unified view of digital terrain analysis in both soil science and geology Features research on new advances in the field, including DEM analytical approximation, analytical calculation of local morphometric variables, morphometric globes, and two-dimensional generalized spectral analytical methods Includes a rigorous description of the mathematical principles of digital terrain analysis Provides both a theoretical and methodological basis for understanding and applying geographical modeling
When some useful information is hidden behind a mass of unwanted information we often resort to information processing used in its broad sense or specifically to signal processing when the useful information is a waveform. In geophysical surveys, in particular in aeromagnetic and gravity surveys, from the measured field it is often difficult to say much about any one specific target unless it is close to the surface and well isolated from the rest. The digital signal processing approach would enable us to bring out the underlying model of the source, that is, the geological structure. Some of the tools of dsp such as digital filtering, spectrum estimation, inversion, etc., have found extensive applications in aeromagnetic and gravity map analysis. There are other emerging applications of dsp in the area of inverse filtering, three dimensional visualization, etc. The purpose of this book is to bring numerous tools of dsp to the geophysical community, in particular, to those who are entering the geophysical profession. Also the practicing geophysicists, involved in the aeromagnetic and gravity data analysis, using the commercially available software packages, will find this book useful in answering their questions on "why and how?". It is hoped that such a background would enable the practising geophysicists to appreciate the prospects and limitations of the dsp in extracting useful information from the potential field maps. The topics covered are: potential field signals and models, digital filtering in two dimensions, spectrum estimation and application, parameter estimation with error bounds.
GEOLOGICAL FIELD TECHNIQUES The understanding of Earth processes and environments over geological time is highly dependent upon both the experience that can only be gained through doing fieldwork, and the collection of reliable data and appropriate samples in the field. This textbook explains the main data gathering techniques used by geologists in the field and the reasons for these, with emphasis throughout on how to make effective field observations and record these in suitable formats. Equal weight is given to assembling field observations from igneous, metamorphic and sedimentary rock types. There are also substantial chapters on producing a field notebook, collecting structural information, recording fossil data and constructing geological maps. Geological Field Techniques is designed for students, amateur enthusiasts and professionals who have a background in geology and wish to collect field data on rocks and geological features. Teaching aspects of this textbook include: step-by-step guides to essential practical skills such as using a compass-clinometer, making a geological map and drawing a field sketch; tricks of the trade, checklists, flow charts and short worked examples; over 200 illustrations of a wide range of field notes, maps and geological features; appendices with the commonly used rock description and classification diagrams; a supporting website hosted by Wiley-Blackwell is available at www.wiley.com/go/coe/geology
"This book is the first attempt to synthesize knowledge on theory, methods, and applications of digital terrain analysis in the context of multiscale problems of soil science and geology. The content of the book is based on long-standing, interdisciplinary research of the author. The book is addressed to geomorphometrists, soil scientists, geologists, geoscientists, geomorphologists, geographers, and GIS scientists (at scholar, lecturer, and postgraduate student levels, with mathematical skills). This book is also intended for the GIS professionals in industry and research laboratories focusing on geoscientific and soil research. The book is divided into three parts. Part I represents main concepts, principles, and methods of digital terrain modeling. Part II discusses various aspects of the use of digital terrain analysis in soil science. Part III looks at applications of digital terrain modeling in geology"--
This edited book discusses various challenges in teaching structural geology and tectonics and how they have been overcome by eminent instructors, who employed effective and innovative means to do so. All of the chapters were written by prominent and active academics and geoscientists fully engaged in teaching Structural Geology and Tectonics. New instructors will find this book indispensible in framing their teaching strategy. Effective teaching of Structural Geology and Tectonics constitutes the backbone of geoscience education. Teaching takes place not only in classrooms, but also in labs and in the field. The content and teaching methodologies for these two fields have changed over time, shaped by the responsibilities that present-day geoscientists are expected to fulfill.
A pocket-size text in a spiral notebook, Procedures in Field Geology was written to provide a presentation of essential field procedures without the bulk and cost of a comprehensive textbook. The field procedures in the text are those that emerged through years of teaching in the Wind River Mountains in Wyoming.
