Disaster Robotics
Disaster Robotics

Author: Satoshi Tadokoro

Publisher: Springer

Published: 2019-01-20

Total Pages: 536

ISBN-13: 3030053210

DOWNLOAD EBOOK

This book introduces readers to the latest findings on disaster robotics. It is based on the ImPACT Tough Robotics Challenge, a national project spearheaded by the Japan Cabinet Office that focuses on developing robotics technologies to aid in disaster response, recovery and preparedness. It presents six subprojects that involve robot platforms and several component technologies used in conjunction with robots: cyber rescue canines, which are digitally empowered rescue dogs; serpent-like robots for searching debris; serpent-like robots for plant/infrastructure inspection; UAVs for gathering information on large areas struck by disaster; legged robots for plant/infrastructure inspection in risky places; and construction robots for recovery tasks that require both power and precision. The book offers a valuable source of information for researchers, engineers and practitioners in safety, security and rescue robotics, disaster robotics, and plant and infrastructure maintenance. It will also appeal to a wider demographic, including students and academics, as it highlights application scenarios and the total concept for each robot in various scientific and technical contexts. In addition to a wealth of figures and photos that explain these robots and systems, as well as experimental data, the book includes a comprehensive list of published papers from this project for readers to refer to. Lastly, an external website offers video footage and updated information from the International Rescue System Institute.

New Technologies, Development and Application VI
New Technologies, Development and Application VI

Author: Isak Karabegovic

Publisher: Springer Nature

Published: 2023-05-19

Total Pages: 775

ISBN-13: 3031310667

DOWNLOAD EBOOK

This book features papers focusing on the implementation of new and future technologies, which were presented at the International Conference on New Technologies, Development and Application, held at the Academy of Science and Arts of Bosnia and Herzegovina in Sarajevo on 22–24 June 2023. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; patents in industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control, energy, and renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems, smart grids, nonlinear systems, power, social and economic systems, education, and IoT. This book is oriented towards Fourth Industrial Revolution “Industry 4.0”, which implementation will improve many aspects of human life in all segments and lead to changes in business paradigms and production models. Further, new business methods are emerging, transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.

Robotics: Industry 4.0 Issues & New Intelligent Control Paradigms
Robotics: Industry 4.0 Issues & New Intelligent Control Paradigms

Author: Alla G. Kravets

Publisher: Springer Nature

Published: 2020-01-06

Total Pages: 237

ISBN-13: 3030378411

DOWNLOAD EBOOK

This book focuses on open issues of new intelligent control paradigms and their usage. Industry 4.0 requires new approaches in the context of secure connection, control, and maintenance of robotic systems, as well as enhancing their interaction with humans. The book presents recent advances in industrial robotics, and robotic design and modeling for various domains, and discusses the methodological foundations of the collaborative robotics concept as a breakthrough in modern industrial technologies. It also describes the implementation of multi-agent models, programs and methods that could be used in future processes for control, condition assessment, diagnostics, prognostication, and proactive maintenance. Further, the book addresses the issue of ensuring the space robotics systems and proposes reliable novel solutions. The authors also illustrate the integration of deep-learning methods and mathematical modeling based on examples of successful robotic systems in various countries, and analyze the connections between robotic modeling and design from the positions of new industrial challenges. The book is intended for practitioners and enterprise representatives, as well as scientists and Ph.D. and Master’s students pursuing research in the area of cyber-physical system development and implementation in various domains.

Industrial robots and cobots
Industrial robots and cobots

Author: Michał Gurgul

Publisher: Michał Gurgul

Published: 2018-12-08

Total Pages: 153

ISBN-13: 8395251300

DOWNLOAD EBOOK

In the modern world, highly repetitive and tiresome tasks are being delegated to machines. The demand for industrial robots is growing not only because of the need to improve production efficiency and the quality of the end products, but also due to rising employment costs and a shortage of skilled professionals. The industrial robot market is projected to grow by 16% year-on-year in the immediate future. The industry’s progressing automation is increasing the demand for specialists who can operate robots. If you would like to join this sought-after and well-paid professional group, it’s time to learn how to operate and program robots using modern methods. This book provides all the information you will need to enter the industry without spending money on training or looking for someone willing to introduce you to the world of robotics. You will learn about all aspects of programming and implementing robots in a company. The book consists of four parts: general introduction to robotics for non-technical people; part two describes industry robotisation; part three depicts the principles and methods of programming robots; the final part touches upon the safety of industrial robots and cobots. Are you a student of a technical faculty, or even a manager of a plant who would like to robotise production? If you are interested in this subject, you won’t find a better book!

Startups and Robots
Startups and Robots

Author: Cséfalvay Zoltán

Publisher: MCC Press

Published: 2024-08-16

Total Pages: 142

ISBN-13: 9636440913

DOWNLOAD EBOOK

MCC Centre for Next Technological Futures Studies on Innovation, Technologies and Regions, Volume 1 As cyberpunk writer William Gibson famously said, “The future is already here—it’s just not evenly distributed.” This ironic statement is particularly relevant when we look at the map of innovation and entrepreneurial ecosystems in Europe, where we can easily see deep regional imbalances. But while the future of technology is nearly impossible to predict, it could be discovered by those companies—the startups whose basic working method is trial and error. In addition, the current deafening hype around artificial intelligence is also reigniting the debate about robots and their impact on our economy and society. And these are the main reasons this book is about startups and robots. The studies conducted at the Centre for Next Technological Futures, Mathias Corvinus Collegium, Budapest, raise questions such as: How does geographic proximity to venture capital affect startups at different stages of development? While startups in Europe are concentrated in a handful of large cities, what opportunities do smaller cities have that specialise in Industry 4.0? What factors influence the use of industrial robots in different European countries, and how does the story of industrial robots differ from the emerging new story of robots in the service sector? Incubators and accelerators can increase the chances of survival of startups, but are those institutions that only chase a quick return on investment really the most successful? CONTRIBUTORS: Borbála Brosig Zoltán Cséfalvay Csaba Kristóf Johanyák Viktor Lázár Csikó Bálint Pálfai Orsolya Székely Zoltán Szombathy Máté Ujvárosi

The Routledge Handbook of the Economics of Ageing
The Routledge Handbook of the Economics of Ageing

Author: David E. Bloom

Publisher: Taylor & Francis

Published: 2023-08-16

Total Pages: 1045

ISBN-13: 1000812804

DOWNLOAD EBOOK

Ageing populations pose some of the foremost global challenges of this century. Drawing on an international pool of scholars, this cutting-edge Handbook surveys the micro, macro and institutional aspects of the economics of ageing. Structured in seven parts, the volume addresses a broad range of themes, including health economics, labour economics, pensions and social security, generational accounting, wealth inequality and regional perspectives. Each chapter combines a succinct overview of the state of current research with a sketch of a promising future research agenda. This Handbook will be an essential resource for advanced students, researchers and policymakers looking at the economics of ageing across the disciplines of economics, demography, public policy, public health and beyond.

Manufacturing In The Era Of 4th Industrial Revolution: A World Scientific Reference (In 3 Volumes)
Manufacturing In The Era Of 4th Industrial Revolution: A World Scientific Reference (In 3 Volumes)

Author:

Publisher: World Scientific

Published: 2021-01-13

Total Pages: 1000

ISBN-13: 9811222800

DOWNLOAD EBOOK

The era of the fourth industrial revolution has fundamentally transformed the manufacturing landscape. Products are getting increasingly complex and customers expect a higher level of customization and quality. Manufacturing in the Era of 4th Industrial Revolution explores three technologies that are the building blocks of the next-generation advanced manufacturing.The first technology covered in Volume 1 is Additive Manufacturing (AM). AM has emerged as a very popular manufacturing process. The most common form of AM is referred to as 'three-dimensional (3D) printing'. Overall, the revolution of additive manufacturing has led to many opportunities in fabricating complex, customized, and novel products. As the number of printable materials increases and AM processes evolve, manufacturing capabilities for future engineering systems will expand rapidly, resulting in a completely new paradigm for solving a myriad of global problems.The second technology is industrial robots, which is covered in Volume 2 on Robotics. Traditionally, industrial robots have been used on mass production lines, where the same manufacturing operation is repeated many times. Recent advances in human-safe industrial robots present an opportunity for creating hybrid work cells, where humans and robots can collaborate in close physical proximities. This Cobots, or collaborative robots, has opened up to opportunity for humans and robots to work more closely together. Recent advances in artificial intelligence are striving to make industrial robots more agile, with the ability to adapt to changing environments and tasks. Additionally, recent advances in force and tactile sensing enable robots to be used in complex manufacturing tasks. These new capabilities are expanding the role of robotics in manufacturing operations and leading to significant growth in the industrial robotics area.The third technology covered in Volume 3 is augmented and virtual reality. Augmented and virtual reality (AR/VR) technologies are being leveraged by the manufacturing community to improve operations in a wide variety of ways. Traditional applications have included operator training and design visualization, with more recent applications including interactive design and manufacturing planning, human and robot interactions, ergonomic analysis, information and knowledge capture, and manufacturing simulation. The advent of low-cost solutions in these areas is accepted to accelerate the rate of adoption of these technologies in the manufacturing and related sectors.Consisting of chapters by leading experts in the world, Manufacturing in the Era of 4th Industrial Revolution provides a reference set for supporting graduate programs in the advanced manufacturing area.

Designing Integrated Industrial Policies Volume I
Designing Integrated Industrial Policies Volume I

Author: Shigeru Thomas Otsubo

Publisher: Routledge

Published: 2020-12-01

Total Pages: 410

ISBN-13: 1000210480

DOWNLOAD EBOOK

This comprehensive reference work gives an overview of the industrial development and current state of industrialization and deindustrialization in Asia, specifically Southeast Asia and China. It introduces typologies of industrial policies and discusses the manufacturing sector and its evolving role in the region. Designing Integrated Industrial Policies examines the integration of SMEs in global value chains and provides macro-econometric and firm-based micro-econometric analyses of (de)industrialization. This book will be a very useful reference particularly as a how-to guide on industrial promotion and designing integrated industrial policies not only for economic growth and job creation but also for "inclusive" development. It presents country cases and illustrates useful tools for industrial policy simulation and for evidence-based policy making through these concrete examples.

Robotics and Mechatronics
Robotics and Mechatronics

Author: Chin-Hsing Kuo

Publisher: Springer Nature

Published: 2019-09-26

Total Pages: 522

ISBN-13: 3030300366

DOWNLOAD EBOOK

This book gathers the latest advances, innovations and applications in the field of robotics and mechatronics, as presented by leading international researchers and engineers at the 6th IFToMM International Symposium on Robotics and Mechatronics (ISRM), held in Taipei, Taiwan, on October 28–30, 2019. It covers highly diverse topics, including mechanism synthesis, analysis, and design, kinematics and dynamics of multibody systems, modelling and simulation, sensors and actuators, novel robotic systems, industrial- and service-related robotics and mechatronics, medical robotics, and historical developments in robotics and mechatronics. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that spur novel research directions and foster new, multidisciplinary collaborations.