Surface Effects and Contact Mechanics including Tribology XII
Surface Effects and Contact Mechanics including Tribology XII

Author: J.Th.M. De Hossen

Publisher: WIT Press

Published: 2015-04-21

Total Pages: 281

ISBN-13: 1845649508

DOWNLOAD EBOOK

The book contains papers from the twelfth in a series of biennial conferences, first held in 1993, on the topics of contact mechanics and surface effects and their interaction. In general, structural components fail by wear, corrosion and fatigue, that is to say affected and initiated by surface conditions. Consequently, it is often appropriate to modify the surface layer of a base material or coat it, so as to provide an enhanced performance or longer life. However, in many cases it is the combined effect of wear and corrosion that is damaging, contributing to complexity in determining the proper approach. The surface treatment chosen should be suitably related to the problem to be solved. The necessary thickness of the coating depends largely on the applied loading and environmental conditions. The papers in the book address novel protective layers for advances in sliding wear and low friction. The contents cover topics such as: Experimental and Measurement Tests; Surface Modification; Surface Problems in Contact Mechanics; Thick and Thin Coatings; Tribomechanics; Computer Simulation.

Advanced Methods of Continuum Mechanics for Materials and Structures
Advanced Methods of Continuum Mechanics for Materials and Structures

Author: Konstantin Naumenko

Publisher: Springer

Published: 2016-05-12

Total Pages: 555

ISBN-13: 9811009597

DOWNLOAD EBOOK

This volume presents a collection of contributions on advanced approaches of continuum mechanics, which were written to celebrate the 60th birthday of Prof. Holm Altenbach. The contributions are on topics related to the theoretical foundations for the analysis of rods, shells and three-dimensional solids, formulation of constitutive models for advanced materials, as well as development of new approaches to the modeling of damage and fractures.

Computational Methods and Experimental Measurements XX
Computational Methods and Experimental Measurements XX

Author: S. Hernández

Publisher: WIT Press

Published: 2021-07-26

Total Pages: 162

ISBN-13: 1784664251

DOWNLOAD EBOOK

Formed of papers presented at the 20th International Conference on Computational Methods and Experimental Measurements, this volume provides a view of the latest work on the interaction between computational methods and experiments. The continuous improvement in computer efficiency, coupled with diminishing costs and the rapid development of numerical procedures have generated an ever-increasing expansion of computational simulations that permeate all fields of science and technology. As these procedures continue to grow in magnitude and complexity, it is essential to validate their results to be certain of their reliability. This can be achieved by performing dedicated and accurate experiments, which have undergone constant and enormous development. At the same time, current experimental techniques have become more complex and sophisticated so that they require the intensive use of computers, both for running experiments as well as acquiring and processing the resulting data. Some of the subject areas covered are Fluid flow studies and experiments; Structural and stress analysis; Materials characterization; Electromagnetic problems; Structural integrity; Destructive and non-destructive testing; Heat transfer and thermal processes; Advances in computational methods; Automotive applications; Aerospace applications; Ocean engineering and marine structures; Fluid-structure interaction; Bio-electromagnetics; Process simulations; Environmental monitoring, modelling and applications; Validation of computer modelling; Data and signal processing; Virtual testing and verification; Electromagnetic compatibility; Life cycle assessment.

Computational Methods in Multiphase Flow VII
Computational Methods in Multiphase Flow VII

Author: C. A. Brebbia

Publisher: WIT Press

Published: 2013-07-03

Total Pages: 557

ISBN-13: 1845647343

DOWNLOAD EBOOK

Multiphase flows are found in all areas of technology, at all length scales and flow regimes and can involve compressible or incompressible linear or nonlinear, fluids. However, although they are ubiquitous, multiphase flows continue to be one of the most challenging areas of computational mechanics, with numerous problems as yet unsolved. Advanced computational and experimental methods are often required to solve the equations that describe such complex problems. The many challenges that must be faced in solving them include modelling nonlinear fluids, modelling and tracking interfaces, dealing with multiple length scales, characterising phase structures, and treating drop break-up and coalescence. It is important to validate models, which calls for the use of expensive and difficult experimental techniques.This book presents contributions on the latest research in the techniques for solving multiphase flow problems, presented at the seventh in a biennial series of conferences on the subject that began in 2001. Featured topics include: Flow in porous media; Turbulent flow; Multiphase flow simulation; Image processing; Heat transfer; Atomization; Interface behaviour; Oil and gas applications; Experimental measurements; Energy applications; Biological flows; Micro and macro fluids; Compressible flows.

Advanced Computational Methods and Experiments in Heat Transfer X
Advanced Computational Methods and Experiments in Heat Transfer X

Author: Bengt Sundén

Publisher: WIT Press

Published: 2008-06-19

Total Pages: 241

ISBN-13: 1845641221

DOWNLOAD EBOOK

In engineering design and development, reliable and accurate computational methods are requested to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements have been achieved during recent years due to improved numerical solutions of non-linear partial differential equations and computer developments to achieve efficient and rapid calculations. Nevertheless, to further progress in computational methods will require developments in theoretical and predictive procedures – both basic and innovative – and in applied research. Accurate experimental investigations are needed to validate the numerical calculations. This book contains the edited versions of the papers presented at the Tenth International Conference on Advanced Computational Methods and Experimental Measurements in Heat Transfer and Mass Transfer held in Maribor, Slovenia in July 2008. The objective of this conference series is to provide a forum for presentation and discussion of advanced topics, new approaches and application of advanced computational methods and experimental measurements to heat and mass transfer problems. The contributed papers are grouped in the following appropriate sections to provide better access for readers: Natural and forced convection; Heat exchangers; Advances in computational methods; Heat recovery; Heat transfer; Modelling and experiments.

Boundary Elements and other Mesh Reduction Methods XLII
Boundary Elements and other Mesh Reduction Methods XLII

Author: Cheng, A. H-D

Publisher: WIT Press

Published: 2019-09-13

Total Pages: 313

ISBN-13: 1784663417

DOWNLOAD EBOOK

Originating from the 42nd conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM), the research presented in this book consist of high quality papers that report on advances in techniques that reduce or eliminate the type of meshes associated with such methods as finite elements or finite differences.

Risk Analysis XII
Risk Analysis XII

Author: S. Syngellakis

Publisher: WIT Press

Published: 2020-08-19

Total Pages: 272

ISBN-13: 1784664014

DOWNLOAD EBOOK

Current events help to emphasise the importance of the analysis and management of risk to planners and researchers around the world. Natural hazards such as floods, earthquakes, landslides, fires and others have always affected human societies. The more recent emergence of the importance of man-made hazards is a consequence of the rapid technological advances made in the last few centuries. The interaction of natural and anthropogenic risks adds to the complexity of the problems. Presented at the 12th International Conference on Risk Analysis and Hazard Mitigation, the included research works cover a variety of topics related to risk analysis and hazard mitigation, associated with both natural and anthropogenic hazards.

Computational & Experimental Methods in Multiphase & Complex Flow X
Computational & Experimental Methods in Multiphase & Complex Flow X

Author: S. Hernández

Publisher: WIT Press

Published: 2019-07-23

Total Pages: 251

ISBN-13: 1784663298

DOWNLOAD EBOOK

Composed of papers presented at the 10th conference on Multiphase flow this book presents the latest research on the subject. The research included in this volume focuses on using synergies between experimental and computational techniques to gain a better understanding of all classes of multiphase and complex flow.

Polymer Waste Management
Polymer Waste Management

Author: Johannes Karl Fink

Publisher: John Wiley & Sons

Published: 2018-08-28

Total Pages: 309

ISBN-13: 1119536391

DOWNLOAD EBOOK

The world is literally awash with plastics and this book practically provides a broad overview of plastic recycling procedures and waste management. With the huge amount of plastics floating in the oceans, fish and other sea creatures are directly suffering the consequences. On land, city leaders and planners are banning one-use plastics as well as plastic bags from grocery stores in an effort to stem the use. Many countries have made official announcements and warnings concerning the pollution caused from plastic wastes. These urgent developments have stimulated the author to study the problem and write Polymer Waste Management. Plastic recycling refers to a method that retrieves the original plastic material. However, there are many sophisticated methods available for the treatment and management of waste plastics such as basic primary recycling, where the materials are sorted and collected individually. In chemical recycling, the monomers and related compounds are processed by special chemical treatments. Other methods, such as pyrolysis, can produce fuels from waste plastics. These methods and others are treated comprehensively in the book. This groundbreaking book also discusses: General aspects, such as amount of plastics production, types of waste plastics, analysis procedures for identification of waste plastic types, standards for waste treatment, contaminants in recycled plastics. Environmental aspects, such as pollution in the marine environment and landfills. The advantages of the use of bio-based plastics. Recycling methods for individual plastic types and special catalysts.

Advances in Fluid Mechanics X
Advances in Fluid Mechanics X

Author: C. A. Brebbia

Publisher: WIT Press

Published: 2014-07-01

Total Pages: 473

ISBN-13: 1845647904

DOWNLOAD EBOOK

Containing the proceedings of the tenth International Conference on Advances in Fluid Mechanics it follows the success of all previous conferences in the series, the first of which took place in 1996. The field of fluid mechanics is vast and has numerous, diverse applications. This book covers a wide range of topics, including basic formulations and their computer modelling as well as the relationship between experimental and analytical results. The emphasis is on new applications and research currently in progress. Topics covered include: Computational methods; Hydrodynamics; Fluid structure interaction; Multiphase flow; Bio-fluids; Electronic components; Environmental fluid mechanics; Heat and mass transfer; Industrial applications; Energy systems; Nano and micro fluids; Turbulent flow; River hydraulics; Combustion problems; Jets; Fluidics; Bubble and drop dynamics.