Diesel Engine Transient Operation

Diesel Engine Transient Operation

Author: Constantine D. Rakopoulos

Publisher: Springer Science & Business Media

Published: 2009-03-10

Total Pages: 408

ISBN-13: 1848823754

DOWNLOAD EBOOK

Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.


Characteristics and Control of Low Temperature Combustion Engines

Characteristics and Control of Low Temperature Combustion Engines

Author: Rakesh Kumar Maurya

Publisher: Springer

Published: 2017-11-03

Total Pages: 553

ISBN-13: 3319685082

DOWNLOAD EBOOK

This book deals with novel advanced engine combustion technologies having potential of high fuel conversion efficiency along with ultralow NOx and particulate matter (PM) emissions. It offers insight into advanced combustion modes for efficient utilization of gasoline like fuels. Fundamentals of various advanced low temperature combustion (LTC) systems such as HCCI, PCCI, PPC and RCCI engines and their fuel quality requirements are also discussed. Detailed performance, combustion and emissions characteristics of futuristic engine technologies such as PPC and RCCI employing conventional as well as alternative fuels are analyzed and discussed. Special emphasis is placed on soot particle number emission characterization, high load limiting constraints, and fuel effects on combustion characteristics in LTC engines. For closed loop combustion control of LTC engines, sensors, actuators and control strategies are also discussed. The book should prove useful to a broad audience, including graduate students, researchers, and professionals Offers novel technologies for improved and efficient utilization of gasoline like fuels; Deals with most advanced and futuristic engine combustion modes such as PPC and RCCI; Comprehensible presentation of the performance, combustion and emissions characteristics of low temperature combustion (LTC) engines; Deals with closed loop combustion control of advanced LTC engines; State-of-the-art technology book that concisely summarizes the recent advancements in LTC technology. .


Combustion Engines

Combustion Engines

Author: Aman Gupta

Publisher: John Wiley & Sons

Published: 2017-02-03

Total Pages: 272

ISBN-13: 1119284511

DOWNLOAD EBOOK

Vehicle noise, vibration, and emissions are only a few of the factors that can have a detrimental effects on overall performance of an engine. These aspects are benchmarks for choice of customers while choosing a vehicle or for engineers while choosing an engine for industrial applications. It is important that mechanical and automotive engineers have some knowledge in this area, as a part of their well-rounded training for designing and selecting various types of engines. This volume is a valuable introductory text and a handy reference for any engineer, manager, or technician working in this area. The automotive industry, and other industries that make use of engines in their industrial applications, account for billions, or even trillions, of dollars of revenue worldwide and are important in the daily lives of many, if not most, of the people living on this planet. This is an area that affects a staggering number of people, and the information needed by engineers and technicians concerning the performance of various types of engines is of paramount importance in designing and selecting engines and the processes into which they are introduced.


Dust Explosion Dynamics

Dust Explosion Dynamics

Author: Russell A. Ogle

Publisher: Butterworth-Heinemann

Published: 2016-09-10

Total Pages: 687

ISBN-13: 0128038292

DOWNLOAD EBOOK

Dust Explosion Dynamics focuses on the combustion science that governs the behavior of the three primary hazards of combustible dust: dust explosions, flash fires, and smoldering. It explores the use of fundamental principles to evaluate the magnitude of combustible dust hazards in a variety of settings. Models are developed to describe dust combustion phenomena using the principles of thermodynamics, transport phenomena, and chemical kinetics. Simple, tractable models are described first and compared with experimental data, followed by more sophisticated models to help with future challenges. Dr. Ogle introduces the reader to just enough combustion science so that they may read, interpret, and use the scientific literature published on combustible dusts. This introductory text is intended to be a practical guide to the application of combustible dust models, suitable for both students and experienced engineers. It will help you to describe the dynamics of explosions and fires involving dust and evaluate their consequences which in turn will help you prevent damage to property, injury and loss of life from combustible dust accidents. - Demonstrates how the fundamental principles of combustion science can be applied to understand the ignition, propagation, and extinction of dust explosions - Explores fundamental concepts through model-building and comparisons with empirical data - Provides detailed examples to give a thorough insight into the hazards of combustible dust as well as an introduction to relevant scientific literature


Modelling Diesel Combustion

Modelling Diesel Combustion

Author: P. A. Lakshminarayanan

Publisher: Springer Science & Business Media

Published: 2010-03-03

Total Pages: 313

ISBN-13: 904813885X

DOWNLOAD EBOOK

Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.


Stabilization and Dynamic of Premixed Swirling Flames

Stabilization and Dynamic of Premixed Swirling Flames

Author: Paul Palies

Publisher: Academic Press

Published: 2020-07-03

Total Pages: 402

ISBN-13: 0128199970

DOWNLOAD EBOOK

Stabilization and Dynamic of Premixed Swirling Flames: Prevaporized, Stratified, Partially, and Fully Premixed Regimes focuses on swirling flames in various premixed modes (stratified, partially, fully, prevaporized) for the combustor, and development and design of current and future swirl-stabilized combustion systems. This includes predicting capabilities, modeling of turbulent combustion, liquid fuel modeling, and a complete overview of stabilization of these flames in aeroengines. The book also discusses the effects of the operating envelope on upstream fresh gases and the subsequent impact of flame speed, combustion, and mixing, the theoretical framework for flame stabilization, and fully lean premixed injector design. Specific attention is paid to ground gas turbine applications, and a comprehensive review of stabilization mechanisms for premixed, partially-premixed, and stratified premixed flames. The last chapter covers the design of a fully premixed injector for future jet engine applications. - Features a complete view of the challenges at the intersection of swirling flame combustors, their requirements, and the physics of fluids at work - Addresses the challenges of turbulent combustion modeling with numerical simulations - Includes the presentation of the very latest numerical results and analyses of flashback, lean blowout, and combustion instabilities - Covers the design of a fully premixed injector for future jet engine applications


NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines

NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines

Author: B. Ashok

Publisher: Elsevier

Published: 2021-11-09

Total Pages: 488

ISBN-13: 0128242280

DOWNLOAD EBOOK

NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines: Approaches Toward NOx Free Automobiles presents the fundamental theory of emission formation, particularly the oxides of nitrogen (NOx) and its chemical reactions and control techniques. The book provides a simplified framework for technical literature on NOx reduction strategies in IC engines, highlighting thermodynamics, combustion science, automotive emissions and environmental pollution control. Sections cover the toxicity and roots of emissions for both SI and CI engines and the formation of various emissions such as CO, SO2, HC, NOx, soot, and PM from internal combustion engines, along with various methods of NOx formation. Topics cover the combustion process, engine design parameters, and the application of exhaust gas recirculation for NOx reduction, making this book ideal for researchers and students in automotive, mechanical, mechatronics and chemical engineering students working in the field of emission control techniques. - Covers advanced and recent technologies and emerging new trends in NOx reduction for emission control - Highlights the effects of exhaust gas recirculation (EGR) on engine performance parameters - Discusses emission norms such as EURO VI and Bharat stage VI in reducing global air pollution due to engine emissions