Traffic Impact Assessment of Moving Work Zone Operations
Traffic Impact Assessment of Moving Work Zone Operations

Author: Praveen Kumar Edara

Publisher:

Published: 2017

Total Pages: 93

ISBN-13:

DOWNLOAD EBOOK

Road maintenance activities involve both short-term stationary work zones and moving work zones. Moving work zones typically involve striping, sweeping, pothole filling, shoulder repairs, and other quick maintenance activities. Existing traffic analysis tools for work zone scheduling are not designed to model moving work zones. A review of existing literature showed that many of the existing studies of moving bottlenecks are theoretical in nature, limited to certain lane configurations, and restrictive in the types of mobile work zone attributes considered. This research project sought to address this gap in existing knowledge by using field data from moving work zones to develop and calibrate a traffic impact analysis tool. This objective was accomplished through the fusion of multiple sources of work zone and traffic data. Four different data sources were used: Missouri Department of Transportation (MoDOT) electronic alerts (e-alerts), probe-based travel times, data from point detectors, and field videos of moving work zones recorded from the back of a truck-mounted attenuator (TMA). A linear regression model was developed to predict traffic speed inside a moving work zone. Predictor variables in the models included historical speed, number of lanes, type of lane closure, and time of day. The simulation tool VISSIM was calibrated for moving work zones using information extracted from videos of moving work zone operations. The three recommended calibration parameters are a safety reduction factor of 0.7, a minimum look ahead distance of 500 ft, and the use of a smooth closeup option. These calibration values can be used by departments of transportation (DOTs) to model moving work zone scenarios. The operational analysis concluded that a moving work activity lasting one hour or more operates best when traffic volumes are under 1,400 veh/hr/ln, and preferably under 1,000 veh/hr/ln. Further, scheduling shorter duration moving activities on high-volume roads at multiple times (on the same day or on different days) works better than scheduling a longer duration activity. The safety analysis generated tradeoff plots between the number of conflicts and combinations of activity duration and traffic volume. A DOT can use these plots to determine, for example, if it should conduct a moving work activity for a short duration when the volume is high or for a longer duration when the volume is lower.

Integrating Planning and Operations Models to Predict Work Zone Traffic
Integrating Planning and Operations Models to Predict Work Zone Traffic

Author: Ayman Smadi

Publisher:

Published: 2008

Total Pages: 56

ISBN-13:

DOWNLOAD EBOOK

The impetus of this research is to meet the growing need for accurate and practical methods to support traffic analysis in work zones. This research examines the application of two classes of traffic analysis models, macroscopic sketch analysis and microscopic traffic simulation, to work zones. The research will evaluate the application of these tools to an urban interstate work zone. Specifically, this research will examine the following: 1) how the use of traffic analysis models relates to federal requirements about considering traffic impacts of major construction projects, 2) the accuracy of model results in comparison to real-world conditions, and 3) modeling effort and data requirements of these models. The primary objectives of this research are as follows: 1) determining the feasibility of applying a traffic analysis model to a work zone environment, 2) calibrating and validating the simulation models based on data collected in the work zone, 3) using the calibrated model to apply various work zone management strategies, and 4) documenting the research findings and lessons learned from the model applications.

Traffic Controls for Construction and Maintenance Work Zones: Office function
Traffic Controls for Construction and Maintenance Work Zones: Office function

Author: American Public Works Association

Publisher:

Published: 1977

Total Pages: 128

ISBN-13:

DOWNLOAD EBOOK

Volume I illustrates many of the typical worksites describing the most common conditions encountered. The information provided can be used to supplement local, state, and national standards. The topics include, among others: Public information, regulatory control, special traffic provisions, protection of pedestrians, flagging, temporary traffic signals, and nighttime procedures. Volume II is intended primarily for use by job site supervisors. It addresses the most common situations, problems and solutions that supervisors might be faced with. The topics include, among others: Emergency work moving operations, temporary traffic control devices, placing devices, temporary removal of signs, and pedestrian needs.

Work Zone Simulation Model
Work Zone Simulation Model

Author: T. H. Maze

Publisher:

Published: 1999

Total Pages: 52

ISBN-13:

DOWNLOAD EBOOK

To support the analysis of driver behavior at rural freeway work zone lane closure merge points, Center for Transportation Research and Education staff collected traffic data at merge areas using video image processing technology. The collection of data and the calculation of the capacity of lane closures are reported in a companion report, "Traffic Management Strategies for Merge Areas in Rural Interstate Work Zones". These data are used in the work reported in this document and are used to calibrate a microscopic simulation model of a typical, Iowa rural freeway lane closure. The model developed is a high fidelity computer simulation with an animation interface. It simulates traffic operations at a work zone lane closure. This model enables traffic engineers to visually demonstrate the forecasted delay that is likely to result when freeway reconstruction makes it necessary to close freeway lanes. Further, the model is also sensitive to variations in driver behavior and is used to test the impact of slow moving vehicles and other driver behaviors. This report consists of two parts. The first part describes the development of the work zone simulation model. The simulation analysis is calibrated and verified through data collected at a work zone in Interstate Highway 80 in Scott County, Iowa. The second part is a user's manual for the simulation model, which is provided to assist users with its set up and operation. No prior computer programming skills are required to use the simulation model.

Roadside Design Guide
Roadside Design Guide

Author: American Association of State Highway and Transportation Officials. Task Force for Roadside Safety

Publisher:

Published: 1989

Total Pages: 560

ISBN-13:

DOWNLOAD EBOOK

Identification of Traffic Management Problems in Work Zones. Final Report
Identification of Traffic Management Problems in Work Zones. Final Report

Author: Jack Bishop Humphreys

Publisher:

Published: 1979

Total Pages: 152

ISBN-13:

DOWNLOAD EBOOK

The report presents a prioritized listing of twenty problem statements relating to traffic safety in construction, maintenance and utility work zones. These problem statements were developed from (1) data collected during 103 site visits, (2) an analysis of 30 construction zones before and during accident case studies, (3) a literature review, and (4) personal experiences of an interdisciplinary, six-person professional staff. Results indicate that approximately two-thirds of the work zone safety problems could be ameliorated if current standards and/or knowledge were properly applied. Results also include data relative to traffic control device use, traffic operation, and accident location in work zones.