Toward the Optimization of Low-temperature Solution-based Synthesis of ZnO Nanostructures for Device Applications

Toward the Optimization of Low-temperature Solution-based Synthesis of ZnO Nanostructures for Device Applications

Author: Hatim Alnoor

Publisher: Linköping University Electronic Press

Published: 2017-10-06

Total Pages: 96

ISBN-13: 9176854817

DOWNLOAD EBOOK

One-dimensional (1D) nanostructures (NSs) of Zinc Oxide (ZnO) such as nanorods (NRs) have recently attracted considerable research attention due to their potential for the development of optoelectronic devices such as ultraviolet (UV) photodetectors and light-emitting diodes (LEDs). The potential of ZnO NRs in all these applications, however, would require synthesis of high crystal quality ZnO NRs with precise control over the optical and electronic properties. It is known that the optical and electronic properties of ZnO NRs are mostly influenced by the presence of native (intrinsic) and impurities (extrinsic) defects. Therefore, understanding the nature of these intrinsic and extrinsic defects and their spatial distribution is critical for optimizing the optical and electronic properties of ZnO NRs. However, identifying the origin of such defects is a complicated matter, especially for NSs, where the information on anisotropy is usually lost due to the lack of coherent orientation. Thus, the aim of this thesis is towards the optimization of the lowtemperature solution-based synthesis of ZnO NRs for device applications. In this connection, we first started with investigating the effect of the precursor solution stirring durations on the deep level defects concentration and their spatial distribution along the ZnO NRs. Then, by choosing the optimal stirring time, we studied the influence of ZnO seeding layer precursor’s types, and its molar ratios on the density of interface defects. The findings of these investigations were used to demonstrate ZnO NRs-based heterojunction LEDs. The ability to tune the point defects along the NRs enabled us further to incorporate cobalt (Co) ions into the ZnO NRs crystal lattice, where these ions could occupy the vacancies or interstitial defects through substitutional or interstitial doping. Following this, high crystal quality vertically welloriented ZnO NRs have been demonstrated by incorporating a small amount of Co into the ZnO crystal lattice. Finally, the influence of Co ions incorporation on the reduction of core-defects (CDs) in ZnO NRs was systematically examined using electron paramagnetic resonance (EPR).


Issues in Chemistry and General Chemical Research: 2011 Edition

Issues in Chemistry and General Chemical Research: 2011 Edition

Author:

Publisher: ScholarlyEditions

Published: 2012-01-09

Total Pages: 10508

ISBN-13: 1464963290

DOWNLOAD EBOOK

Issues in Chemistry and General Chemical Research: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Chemistry and General Chemical Research. The editors have built Issues in Chemistry and General Chemical Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Chemistry and General Chemical Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Chemistry and General Chemical Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.


Solution Processed Metal Oxide Thin Films for Electronic Applications

Solution Processed Metal Oxide Thin Films for Electronic Applications

Author: Zheng Cui

Publisher: Elsevier

Published: 2020-06-11

Total Pages: 180

ISBN-13: 0128149310

DOWNLOAD EBOOK

Solution Processed Metal Oxide Thin Films for Electronic Applications discusses the fundamentals of solution processing materials chemistry techniques as they are applied to metal oxide materials systems for key device applications. The book introduces basic information (materials properties, materials synthesis, barriers), discusses ink formulation and solution processing methods, including sol-gel processing, surface functionalization aspects, and presents a comprehensive accounting on the electronic applications of solution processed metal oxide films, including thin film transistors, photovoltaic cells and other electronics devices and circuits. This is an important reference for those interested in oxide electronics, printed electronics, flexible electronics and large-area electronics. - Provides in-depth information on solution processing fundamentals, techniques, considerations and barriers combined with key device applications - Reviews important device applications, including transistors, light-emitting diodes, and photovoltaic cells - Includes an overview of metal oxide materials systems (semiconductors, nanomaterials and thin films), addressing materials synthesis, properties, limitations and surface aspects


Metal Oxide Nanostructures

Metal Oxide Nanostructures

Author: Daniela Nunes

Publisher: Elsevier

Published: 2018-11-01

Total Pages: 331

ISBN-13: 012811505X

DOWNLOAD EBOOK

Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. - Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices - Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures - Provides an in-depth overview of novel applications, including chromogenics, electronics and energy


Carbon and Oxide Nanostructures

Carbon and Oxide Nanostructures

Author: Noorhana Yahya

Publisher: Springer Science & Business Media

Published: 2011-01-12

Total Pages: 413

ISBN-13: 3642146732

DOWNLOAD EBOOK

This volume covers all aspects of carbon and oxide based nanostructured materials. The topics include synthesis, characterization and application of carbon-based namely carbon nanotubes, carbon nanofibres, fullerenes, carbon filled composites etc. In addition, metal oxides namely, ZnO, TiO2, Fe2O3, ferrites, garnets etc., for various applications like sensors, solar cells, transformers, antennas, catalysts, batteries, lubricants, are presented. The book also includes the modeling of oxide and carbon based nanomaterials. The book covers the topics: Synthesis, characterization and application of carbon nanotubes, carbon nanofibres, fullerenes Synthesis, characterization and application of oxide based nanomaterials. Nanostructured magnetic and electric materials and their applications. Nanostructured materials for petro-chemical industry. Oxide and carbon based thin films for electronics and sustainable energy. Theory, calculations and modeling of nanostructured materials.


Contemporary Trends in Semiconductor Devices

Contemporary Trends in Semiconductor Devices

Author: Rupam Goswami

Publisher: Springer Nature

Published: 2022-02-16

Total Pages: 313

ISBN-13: 981169124X

DOWNLOAD EBOOK

This book covers evolution, concept and applications of modern semiconductor devices such as tunnel field effect transistors (TFETs), vertical super-thin body MOSFETs, ion sensing FETs (ISFETs), non-conventional solar cells, opto-electro mechanical devices and thin film transistors (TFTs). Comprising of theory, experimentation and applications of devices, the chapters describe state-of-art methods and techniques which shall be highly assistive in having an overall perspective on emerging technologies and working on a research area. The book is aimed at the scholars, enthusiasts and researchers who are currently working on devices in the contemporary era of semiconductor devices. Additionally, the chapters are lucid and descriptive and carry the potential of serving as a reference book for scholars in their undergraduate studies, who are looking ahead for a prospective career in semiconductor devices.


Chemical Solution Synthesis for Materials Design and Thin Film Device Applications

Chemical Solution Synthesis for Materials Design and Thin Film Device Applications

Author: Soumen Das

Publisher: Elsevier

Published: 2021-01-09

Total Pages: 748

ISBN-13: 012823170X

DOWNLOAD EBOOK

Chemical Solution Synthesis for Materials Design and Thin Film Device Applications presents current research on wet chemical techniques for thin-film based devices. Sections cover the quality of thin films, types of common films used in devices, various thermodynamic properties, thin film patterning, device configuration and applications. As a whole, these topics create a roadmap for developing new materials and incorporating the results in device fabrication. This book is suitable for graduate, undergraduate, doctoral students, and researchers looking for quick guidance on material synthesis and device fabrication through wet chemical routes. - Provides the different wet chemical routes for materials synthesis, along with the most relevant thin film structured materials for device applications - Discusses patterning and solution processing of inorganic thin films, along with solvent-based processing techniques - Includes an overview of key processes and methods in thin film synthesis, processing and device fabrication, such as nucleation, lithography and solution processing


Metal Oxide-Based Photocatalysis

Metal Oxide-Based Photocatalysis

Author: Adriana Zaleska-Medynska

Publisher: Elsevier

Published: 2018-04-09

Total Pages: 372

ISBN-13: 0128116331

DOWNLOAD EBOOK

Metal Oxide-Based Photocatalysis: Fundamentals and Prospects for Application explains the principles and fundamentals of metal oxide-based photocatalysis and the requirements necessary for their use in photocatalysis. It also discusses preparation methods for photocatalysis, and the advantages, disadvantages and achievements of the most important metal oxides (TiO2, ZnO, Fe2O3, Ta2O3, CuO, NiO, Cr2O3, RuO2, etc.). The book concludes with the most important photocatalytic applications and an overview of the future. Applications are organized by potential needs and solutions, addressing such areas as water treatment, hydrogen production, air treatment, chemical synthesis, and applications in medicine and construction. - Provides coverage of applications, presenting needs and solutions - Covers essential applications, such as water treatment, hydrogen production, air depollution, medical applications, and much more - Includes the characterization of the most important metal oxides used in heterogeneous photocatalysis


Chemically Deposited Nanocrystalline Metal Oxide Thin Films

Chemically Deposited Nanocrystalline Metal Oxide Thin Films

Author: Fabian I. Ezema

Publisher: Springer Nature

Published: 2021-06-26

Total Pages: 926

ISBN-13: 3030684628

DOWNLOAD EBOOK

This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.