This volume focuses on biodegradation of xenobiotic compounds in soil and aqueous environments. Articles discuss the bioremediation of media contaminated with PAHs, PCBs, PCP, pesticides, explosives, bis(2)-ethyl-hexyl-phthalate, pharmaceutical residues, and alkylpyridines. Also covered is the variation of nutrient supplies for optimizing hydrocarbon biodegradation.
The introduction of synthetic organic chemicals into the environment during the last few decades has given rise to major concern about the ecotoxicological effects and ultimate fate of these compounds. The pollutants that are considered to be most hazardous because of their intrinsic toxicity, high exposure level, or recalcitrant behavior in the environment have been placed on blacklists and other policy priority lists. The fate of synthetic compounds that enter the environment is mainly determined by their rate of biodegradation, which therefore also has a major effect on the degree of bioaccumulation and the risk of ecotoxicological effects. The degree and rate of biodegradation is also of critical importance for the feasibility of biological techniques to clean up contaminated sites and waste streams. The biodegradation of xenobiotics has thus been the subject of numerous studies, which resulted in thousands of publications in scientific journals, books, and conference proceedings. These studies led to a deeper understanding of the diversity of biodegradation processes. As a result, it has become possible to enhance the rate of degradation of recalcitrant pollutants during biological treatment and to design completely new treatment processes. At present, much work is being done to expand the range of pollutants to which biodegradation can be applied, and to make treatment techniques less expensive and better applicable for waste streams which are difficult to handle.
FROM THE INTRODUCTION This three-volume series, Bioremediation: Principles and Practice, provides state of the art description of advances in pollution treatment and reduction using biological means; identify and address, at a fundamental level, broad scientific and technological areas that are unique to the subject or theme and that must be understood if advances are to be made; and provide a comprehensive overview of new developments at the regulatory, desk-top, bench-scale, pilot scale, and full-scale levels. The series covers all media-air, water, and soil/sediment-and blends the talents, knowledge, and know-how of academic, industrial, governmental, and international contributors. The series addresses the removal of both hazardous and nonhazardous contaminants from the liquid, solid, and gas phase using biological processes. This includes the biological treatment of wastes of municipal and industrial origin; bioremediation of leachates, soils, and sediments; and biofiltration for contaminated gases.
"This second edition of Remediation Engineering will continue to be the seminal handbook that regulators must have on-hand to address any of the remediation issues they are grappling with daily. The book is wide-ranging, but specific enough to address any environmental remediation challenge." —Patricia Reyes, Interstate Technology Regulatory Council, Washington, DC, USA "This book offers the researcher, teacher, practitioner, student, and regulator with state-of-the-art advances in conducting site investigations and remediation for common and emerging contaminants. It is revolutionary in its approach to conducting subsurface investigation, which greatly influences a successful and appropriate response in assessing and addressing environmental risk. This book is a giant leap forward in understanding how contaminates behave and how to reduce risk to acceptable levels in the natural world." —Daniel T. Rogers, Amsted Industries Incorporated, Chicago, Illinois, USA "This text is a superb reference and a good tool for learning about state-of-the-art techniques in remediation of soil and groundwater. [It] will become a ready reference at many companies as the engineering community creates increased value from remediation efforts around the world." —John Waites, AVX Corporation, Fountain Inn, South Carolina, USA Remediation Engineering was first published in 1996 and quickly became the go-to reference for a relatively young industry, offering the first comprehensive look at the state-of-the-science in treatment technologies of the time and the contaminants they applied to. This fully updated Second Edition will capture the fundamental advancements that have taken place during the last two decades within all the subdisciplines that form the foundation of the remediation engineering platform. It covers the entire spectrum of current technologies that are employed in the industry and also discusses future trends and how practitioners should anticipate and adapt to those needs. Features: Shares the latest paradigms in remediation design approach and contaminant hydrogeology Presents the landscape of new and emerging contaminants Details the current state of the practice for both conventional technologies, such as sparging and venting Examines newer technologies such as dynamic groundwater recirculation and injection-based remedies to address both organic and inorganic contaminants. Describes the advances in site characterization concepts such as smart investigations and digital conceptual site models. Includes all-new color photographs and figures.
An international group of researchers and engineers discuss using natural attenuation to degrade contaminants and thereby remediate soils and groundwater. This volume describes laboratory studies and field demonstrations in support of subsurface remediation at military, manufactured gas plant, landfill, petroleum spill, and other sites. The contaminants of concern include benzene, toluene, ethyl-benzene, and xylenes (BTEX); naphthalene; trichloroethene; trichlorethane; and perchloroethylene. Analytical methods for assessing the potential for natural attenuation (passive bioremediation) at a given site and for confirming and documenting efficacy are discussed.
One of a set presenting selected papers from the Third International In Situ and On-Site Bioreclamation Symposium, San Diego, April 1995. The 17 papers on inorganics include discussions of metal removal and sulfate reduction in low-sulfate mine drainage, removing toxic elements with aquatic plants and algae, the volatilization of arsenic compounds by microorganisms, and considerations in deciding to treat contaminated soils in situ. The entire 11-volume, 375-paper set (1-57477-001-2), including an index volume, is available for $449.50. Annotation copyright by Book News, Inc., Portland, OR
This volume covers bioremediation markets, general technology overviews, and selected case studies of crude oil spills in marine environments, heavy-metal co-contamination, steam injection, nitrate-based bioremediation, land farming, nutrient addition, confined aquifers, anaerobic biodegradation, free-product recovery technologies, bioremediation in low permeability soils and rock, biopile treatment, field-scale studies, oily waste organics as soil amendments, BTEX degradation in a biofilter, surfactant-aided recovery, mass transport in BTEX removal, electron acceptor selection and delivery strategies, and electrokinetic moisture and nutrient control in unsaturated soils.
A groundbreaking text and professional resource on natural attenuation technology Natural attenuation is rapidly becoming a widely used approach to manage groundwater and soil contamination by hazardous substances in petroleum-product releases and leachate from hazardous waste sites and landfills. This book provides, under one cover, the current methodologies needed by groundwater scientists and engineers in their efforts to evaluate subsurface contamination problems, to estimate risk to human health and ecosystems through mathematical models, and to design and formulate appropriate remediation strategies. Incorporating the authors' extensive backgrounds as educators, researchers, and consultants in environmental biotechnology and hydrogeology, the text emphasizes new concepts and recent advances in the science, including: Quantification of the role of microbes in natural attenuation Biodegradation and chemical transformation principles Immobilization and phase change Biotransformation mechanisms Groundwater flow and contaminant transport Analytical models for contaminant transport and reaction processes Numerical modeling of contaminant transport, transformation, and degradation Detailed descriptions of fundamental processes, characterization approaches, and analytical and numerical methods tied to relevant real-world applications make Bioremediation and Natural Attenuation: Process Fundamentals and Mathematical Models both a timely course text in hydrogeology and environmental engineering and a valuable reference for anyone in the groundwater or risk assessment professions.
