An overall scheme is presented for the comprehensive analysis of flammable and combustible liquid residues in fire debris, mainly utilizing passive adsorption onto Tenax TA followed by thermal desorption. Records of all suspected arson cases submitted to the author's laboratory for analysis during a 12 month period have been reviewed and results tabulated. Information included location of fire incident, type and frequency of sample exhibit items, results of analysis, and the interrelationships between each of these factors. A total of 1040 items were examined from 437 cases. Fires within residential premises and motor vehicles accounted for the largest group of exhibits submitted. Flammable or combustible liquid residues were detected in 47.4% of items, with petrol the most common ignitable liquid. As a group, fabric items, carpets, and plastics exhibited the highest incidence of flammable or combustible liquid residues, and ashen debris and soil the lowest.
The study of fire debris analysis is vital to the function of all fire investigations, and, as such, Fire Debris Analysis is an essential resource for fire investigators. The present methods of analysis include the use of gas chromatography and gas chromatography-mass spectrometry, techniques which are well established and used by crime laboratories throughout the world. However, despite their universality, this is the first comprehensive resource that addresses their application to fire debris analysis. Fire Debris Analysis covers topics such as the physics and chemistry of fire and liquid fuels, the interpretation of data obtained from fire debris, and the future of the subject. Its cutting-edge material and experienced author team distinguishes this book as a quality reference that should be on the shelves of all crime laboratories. Serves as a comprehensive guide to the science of fire debris analysis Presents both basic and advanced concepts in an easily readable, logical sequence Includes a full-color insert with figures that illustrate key concepts discussed in the text
This text provides training on the fundamental tools and methodologies used in active forensic laboratories for the complicated analysis of fire debris and explosives evidence. It is intended to serve as a gateway for students and transitioning forensic science or chemistry professionals. The book is divided between the two disciplines of fire debris and explosives, with a final pair of chapters devoted to the interplay between the two disciplines and with other disciplines, such as DNA and fingerprint analysis. It brings together a multi-national group of technical experts, ranging from academic researchers to active practitioners, including members of some of the premier forensic agencies of the world. Readers will gain knowledge of practical methods of analysis and will develop a strong foundation for laboratory work in forensic chemistry. End-of-chapter questions based on relevant topics and real-world data provide a realistic arena for learners to test newly-acquired techniques.
Recent developments in analytical instrumentation have had an enormous influence on forensic analysis. The mass spectrometer is now an integral part of every forensic laboratory, resulting in greater analytical accuracy, more reliable identification, and lower detection limits. As the instrumental method of choice among forensic analysts, the mass
The second in a three-volume series, this popular and widely circulated professional handbook describes the theories and practices of today's criminalistics, and covers a wide range of subject areas relevant to the services rendered by crime laboratories and related facilities. Presents authoritative reviews from recognized forensic criminologists and forensic scientists well-versed in their chosen areas of expertise. Considers a specific examination technique for a wide-range of evidence prevalent in the modern crime laboratory, e.g., DNA, hair, paint, soil, glass, petroleum products, explosives, alcohol in blood and breath, and questioned documents. Describes the theory, operation, and forensic utilization of such modern analytical instruments as mass spectrometry, capillary electrophoresis, high-performance liquid chromatography, and the visible microspectrophotometer. Emphasizes the symbiotic relationship between forensic science and criminal law as it examines the role and conduct of the expert witness, rules of evidence, and the legal requirements governing the admissibility of scientifically evaluated evidence. For professionals in forensic science and criminology.
Identification of ignitable liquid residues in the presence of background interferences, especially those arising from pyrolysis processes, is a major challenge for the fire debris analyst. The proposed research will lead to a mathematical model that allows for the detection of an ignitable liquid in a fire debris sample and the classification of the ignitable liquid according to the ASTM E1618 classification scheme. The research will examine the influence of substrate pyrolysis and non-pyrolysis interferences on: (1) probability of correct prediction of the presence of an ignitable liquid in real and simulated fire debris samples (Type I and Type II error rates) and (2) probability of correct prediction of the associated ignitable liquid ASTM class and sub-class (heavy, medium or light) in positive samples. Potential alternative sub-groupings of ignitable liquids will be examined based on cluster analysis techniques. Models will be examined which are based on principal components analysis (PCA), linear discriminant analysis (LDA) and soft independent model classification analogy (SIMCA). The model will be developed from the summed ion spectra of nearly 500 ignitable liquid and 50 pyrolysis sample GC-MS data sets with ANOVA-assisted variable selection. Training data sets will be taken from the National Center for Forensic Science ignitable liquid and substrate pyrolysis databases. Simulated fire debris samples generated in the laboratory and samples from large-scale burns will also be employed in model testing. Model performance will be statistically evaluated by receiver operator characteristic analysis. The final model will be implemented in a software solution for forensic laboratory use. This project proposed to investigate the development of a method for classifying fire debris GC-MS data sets as: (1) containing or not containing an ignitable liquid, (2) classifying any ignitable liquid that may be present under the ASTM E1618 classification scheme and (3) estimating the statistical certainty of the answers to questions 1 and 2. The proposed approach is to build a mathematical model that can correctly classify GC-MS data from ignitable liquids and pyrolyzed substrates (wood, plastic, etc.). The model will then be applied to GC-MS data from laboratory-generated fire debris samples, as well as ignitable liquids and substrates that were not used to build the model. The classification success of the model will allow a determination of the statistical performance of the model by ROC analysis. The model will be developed based on the total ion spectrum, which has already shown a propensity for classifying a set of ignitable liquids drawn from multiple ASTM classes.
Comprehensive Sampling and Sample Preparation is a complete treatment of the theory and methodology of sampling in all physical phases and the theory of sample preparation for all major extraction techniques. It is the perfect starting point for researchers and students to design and implement their experiments and support those experiments with quality-reviewed background information. In its four volumes, fundamentals of sampling and sample preparation are reinforced through broad and detailed sections dealing with Biological and Medical, Environmental and Forensic, and Food and Beverage applications. The contributions are organized to reflect the way in which analytical chemists approach a problem. It is intended for a broad audience of analytical chemists, both educators and practitioners of the art and can assist in the preparation of courses as well in the selection of sampling and sample preparation techniques to address the challenges at hand. Above all, it is designed to be helpful in learning more about these topics, as well as to encourage an interest in sampling and sample preparation by outlining the present practice of the technology and by indicating research opportunities. Sampling and Sample preparation is a large and well-defined field in Analytical Chemistry, relevant for many application areas such as medicine, environmental science, biochemistry, pharmacology, geology, and food science. This work covers all these aspects and will be extremely useful to researchers and students, who can use it as a starting point to design and implement their experiments and for quality-reviewed background information There are limited resources that Educators can use to effectively teach the fundamental aspects of modern sample preparation technology. Comprehensive Sampling and Sample Preparation addresses this need, but focuses on the common principles of new developments in extraction technologies rather than the differences between techniques thus facilitating a more thorough understanding Provides a complete overview of the field. Not only will help to save time, it will also help to make correct assessments and avoid costly mistakes in sampling in the process Sample and sample preparation are integral parts of the analytical process but are often less considered and sometimes even completely disregarded in the available literature. To fill this gap, leading scientists have contributed 130 chapters, organized in 4 volumes, covering all modern aspects of sampling and liquid, solid phase and membrane extractions, as well as the challenges associated with different types of matrices in relevant application areas
Current fire debris analysis procedure involves using the chromatographic patterns of total ion chromatograms, extracted ion chromatograms, and target compound analysis to identify an ignitable liquid according to the American Society for Testing and Materials (ASTM) E 1618 standard method. Classifying the ignitable liquid is accomplished by a visual comparison of chromatographic data obtained from any extracted ignitable liquid residue in the debris to the chromatograms of ignitable liquids in a database, i.e. by visual pattern recognition. Pattern recognition proves time consuming and introduces potential for human error. One particularly difficult aspect of fire debris analysis is recognizing an ignitable liquid residue when the intensity of its chromatographic pattern is extremely low or masked by pyrolysis products. In this research, a unique approach to fire debris analysis was applied by utilizing the samples' total ion spectrum (TIS) to identify an ignitable liquid, if present. The TIS, created by summing the intensity of each ion across all elution times in a gas chromatography-mass spectrometry (GC-MS) dataset retains sufficient information content for the identification of complex mixtures . Computer assisted spectral comparison was then performed on the samples' TIS by target factor analysis (TFA). This approach allowed rapid automated searching against a library of ignitable liquid summed ion spectra. Receiver operating characteristic (ROC) curves measured how well TFA identified ignitable liquids in the database that were of the same ASTM classification as the ignitable liquid in fire debris samples, as depicted in their corresponding area under the ROC curve. This study incorporated statistical analysis to aid in classification of an ignitable liquid, therefore alleviating interpretive error inherent in visual pattern recognition. This method could allow an analyst to declare an ignitable liquid present when utilization of visual pattern recognition alone is not sufficient.