The assembly of electronic circuit boards has emerged as one of the most significant growth areas for robotics and automated assembly. This comprehensive volume, which is an edited collection of material mostly published in "Assembly Engineering" and "Electronic Packaging and Production", will provide an essential reference for engineers working in this field, including material on Multi Layer Boards, Chip-on-board and numerous case studies. Frank J. Riley is senior vice-president of the Bodine Corporation and a world authority on assembly automation.
The Handbook of Electronics Packaging Design and Engineering has been writ ten as a reference source for use in the packaging design of electronics equip ment. It is designed to provide a single convenient source for the solution of re curring design problems. The primary consideration of any design is that the end product meet or exceed the applicable product specifications. The judicious use of uniform design practices will realize the following economies and equipment improvements: • Economics of design. Uniform design practices will result in less engineering and design times and lower costs. They will also reduce the number of changes that may be required due to poor reliability, maintainability, or producibility. • Improved design. Better designs with increased reliability, maintainability, and producibility will result from the use of uniform design practices. • Production economies. Uniform designs employing standard available tools, materials, and parts will result in the cost control of manufacturing. The Handbook is intended primarily for the serious student of electronics packaging and for those engineers and designers actively engaged in this vital and interesting profession. It attempts to present electronics packaging as it is today. It can be used as a training text for instructional purposes and as a reference source for the practicing designer and engineer.
Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are described. The book also underscores testing for quality. Reliability, component parts testing, production processes, and the packaged and unpackaged assemblies are discussed. The text also examines standardization of electronics manufacture. Reference to standards, standards of organizations and bodies, assessed quality of companies, and setting up of company standards are considered. The book also discusses the process of selling to the Ministry of Defense. Procurement executive, quality assurance, and procurement executive policies and procedures are clarified. The handbook is a helpful reference for readers wanting to study the processes involved in electronic assembling.
Originally conceived as a supplement to the SMTA Certification Program, this book is a must-have reference manual for all process engineers working in the electronics industry as well as anyone just entering the industry. The book provides an in-depth understanding of the entire electronic assembly process. Chapter topics include soldering and materials, printed wiring boards, components, paste-print stencil, component placement, assembly line design and optimization, solder reflow, wave soldering, dispensing, and inspection and test.
Managers, engineers and technicians will use this book during industrial construction of electronics assemblies, whilst students can use the book to get a grasp of the variety of methods available, together with a discussion of technical concerns. It includes over 200 illustrations, including a photographic guide to defects, and contains many line drawings, tables and flow charts to illustrate the subject of electronics assembly. Soldering in Electronics Assembly looks theoretically at everything needed in a detailed study, but in a practical manner. It examines the soldering processes in the light of electronic assembly type; solder; flux; and cleaning requirements. It has information on every available process, from the most basic hand soldering through to latest innovatory ones such as inert atmosphere wave soldering and zoned forced convection infra-red machines. The book provides a detailed analysis of solder and soldering action; purpose of flux and relevant flux types for any application; classification of assembly variants; assessment and maintenance of solderability. There is also a detailed analysis of soldering process defects and causes. In addition, Soldering in Electronics Assembly contains a new chapter on Ball Grid Array (BGA) technology. - A practical guide for the industry covering all the main soldering processes currently in use - Cleaning, faults, troubleshooting and standards are all major topics - Considers safety and solder process quality assessment
BoardTalk had its humble beginnings as a SMT expert Q&A session with Phil Zarrow and Jim Hall at an SMTAI conference. Ten years and over 200 episodes later, the "Assembly Brothers - Pick and Place" have transcribed their informative discussions from CircuitInsight.com, where BoardTalk is streamed all over the world.
An authoritative guide to optimizing design for manufacturability and reliability from a team of experts Design for Excellence in Electronics Manufacturing is a comprehensive, state-of-the-art book that covers design and reliability of electronics. The authors—noted experts on the topic—explain how using the DfX concepts of design for reliability, design for manufacturability, design for environment, design for testability, and more, reduce research and development costs and decrease time to market and allow companies to confidently issue warranty coverage. By employing the concepts outlined in Design for Excellence in Electronics Manufacturing, engineers and managers can increase customer satisfaction, market share, and long-term profits. In addition, the authors describe the best practices regarding product design and show how the practices can be adapted for different manufacturing processes, suppliers, use environments, and reliability expectations. This important book: Contains a comprehensive review of the design and reliability of electronics Covers a range of topics: establishing a reliability program, design for the use environment, design for manufacturability, and more Includes technical information on electronic packaging, discrete components, and assembly processes Shows how aspects of electronics can fail under different environmental stresses Written for reliability engineers, electronics engineers, design engineers, component engineers, and others, Design for Excellence in Electronics Manufacturing is a comprehensive book that reveals how to get product design right the first time.
*Covers design, packaging, construction, assembly, and application of all three approaches to Area Array Packaging: Ball Grid Array (BGA), Chip Scale Package (CSP), and Flip Chip (FC) *Details the pros and cons of each technology with varying applications *Examines packaging ramifications of high density interconnects (HDI)
Organic flexible electronics represent a highly promising technology that will provide increased functionality and the potential to meet future challenges of scalability, flexibility, low power consumption, light weight, and reduced cost. They will find new applications because they can be used with curved surfaces and incorporated in to a number of products that could not support traditional electronics. The book covers device physics, processing and manufacturing technologies, circuits and packaging, metrology and diagnostic tools, architectures, and systems engineering. Part one covers the production, properties and characterisation of flexible organic materials and part two looks at applications for flexible organic devices. - Reviews the properties and production of various flexible organic materials. - Describes the integration technologies of flexible organic electronics and their manufacturing methods. - Looks at the application of flexible organic materials in smart integrated systems and circuits, chemical sensors, microfluidic devices, organic non-volatile memory devices, and printed batteries and other power storage devices.
