The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, 'minimal' processing technologies, functional foods, developments in 'active' or 'intelligent' packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. - Introduces a range of processing techniques that are used in food manufacturing - Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods - Describes post-processing operations, including packaging and distribution logistics
This book will review the current status of the agriculture and agri-food sector in regard to green processing and provide strategies that can be used by the sector to enhance the use of environmentally-friendly technologies for production, processing. The book will look at the full spectrum from farm to fork beginning with chapters on life cycle analysis and environmental impact assessment of different agri-food sectors. This will be followed by reviews of current and novel on-farm practices that are more environmentally-friendly, technologies for food processing that reduce chemical and energy use and emissions as well as novel analytical techniques for R&D and QA which reduce solvent, chemical and energy consumption. Technologies for waste treatment, "reducing, reusing, recycling", and better water and energy stewardship will be reviewed. In addition, the last section of the book will attempt to look at technologies and processes that reduce the generation of process-induced toxins (e.g., trans fats, acrylamide, D-amino acids) and will address consumer perceptions about current and emerging technologies available to tackle these processing and environmental issues.
The second edition of Emerging Technologies in Food Processing presents essential, authoritative, and complete literature and research data from the past ten years. It is a complete resource offering the latest technological innovations in food processing today, and includes vital information in research and development for the food processing industry. It covers the latest advances in non-thermal processing including high pressure, pulsed electric fields, radiofrequency, high intensity pulsed light, ultrasound, irradiation, and addresses the newest hurdles in technology where extensive research has been carried out. - Provides an extensive list of research sources to further research development - Presents current and thorough research results and critical reviews - Includes the most recent technologies used for shelf life extension, bioprocessing simulation and optimization
Innovative Food Processing Technologies: Extraction, Separation, Component Modification and Process Intensification focuses on advances in new and novel non-thermal processing technologies which allow food producers to modify and process food with minimal damage to the foodstuffs. The book is highly focused on the application of new and novel technologies, beginning with an introductory chapter, and then detailing technologies which can be used to extract food components. Further sections on the use of technologies to modify the structure of food and the separation of food components are also included, with a final section focusing on process intensification and enhancement. - Provides information on a variety of food processing technologies - Focuses on advances in new and novel non-thermal processing technologies which allow food producers to modify and process food with minimal damage to the foodstuffs - Presents a strong focus on the application of technologies in a variety of situations - Created by editors who have a background in both the industry and academia
Food process engineering, a branch of both food science and chemical engineering, has evolved over the years since its inception and still is a rapidly changing discipline. While traditionally the main objective of food process engineering was preservation and stabilization, the focus today has shifted to enhance health aspects, flavour and taste, nutrition, sustainable production, food security and also to ensure more diversity for the increasing demand of consumers. The food industry is becoming increasingly competitive and dynamic, and strives to develop high quality, freshly prepared food products. To achieve this objective, food manufacturers are today presented with a growing array of new technologies that have the potential to improve, or replace, conventional processing technologies, to deliver higher quality and better consumer targeted food products, which meet many, if not all, of the demands of the modern consumer. These new, or innovative, technologies are in various stages of development, including some still at the R&D stage, and others that have been commercialised as alternatives to conventional processing technologies. Food process engineering comprises a series of unit operations traditionally applied in the food industry. One major component of these operations relates to the application of heat, directly or indirectly, to provide foods free from pathogenic microorganisms, but also to enhance or intensify other processes, such as extraction, separation or modification of components. The last three decades have also witnessed the advent and adaptation of several operations, processes, and techniques aimed at producing high quality foods, with minimum alteration of sensory and nutritive properties. Some of these innovative technologies have significantly reduced the thermal component in food processing, offering alternative nonthermal methods. Food Processing Technologies: A Comprehensive Review, Three Volume Set covers the latest advances in innovative and nonthermal processing, such as high pressure, pulsed electric fields, radiofrequency, high intensity pulsed light, ultrasound, irradiation and new hurdle technology. Each section will have an introductory article covering the basic principles and applications of each technology, and in-depth articles covering the currently available equipment (and/or the current state of development), food quality and safety, application to various sectors, food laws and regulations, consumer acceptance, advancements and future scope. It will also contain case studies and examples to illustrate state-of-the-art applications. Each section will serve as an excellent reference to food industry professionals involved in the processing of a wide range of food categories, e.g., meat, seafood, beverage, dairy, eggs, fruits and vegetable products, spices, herbs among others.
With the unprecedented increase in the world’s population, the need for different foodprocessing techniques becomes extremely important. And with the increase in awareness of and demand for food quality, processed products with improved quality and better taste that are safe are also important aspects that need to be addressed. In this volume, experts examine the use of different technologies for food processing. They look at technology with ways to preserve nutrients, eliminate anti-nutrients and toxins, add vitamins and minerals, reduce waste, and increase productivity. Topics include, among others: • applications of ohmic heating • cold plasma in food processing • the role of biotechnology in the production of fermented foods and beverages • the use of modification of food proteins using gamma irradiation • edible coatings to restrain migration of moisture, oxygen, and carbon dioxide • natural colorants, as opposed to synthetic coloring, which may have toxic effects • hurdle technology in the food industry • the unrecognized potential of agro-industrial waste
Green Food Processing Techniques: Preservation, Transformation and Extraction advances the ethics and practical objectives of "Green Food Processing" by offering a critical mass of research on a series of methodological and technological tools in innovative food processing techniques, along with their role in promoting the sustainable food industry. These techniques (such as microwave, ultrasound, pulse electric field, instant controlled pressure drop, supercritical fluid processing, extrusion...) lie on the frontier of food processing, food chemistry, and food microbiology, and are thus presented with tools to make preservation, transformation and extraction greener. The Food Industry constantly needs to reshape and innovate itself in order to achieve the social, financial and environmental demands of the 21st century. Green Food Processing can respond to these challenges by enhancing shelf life and the nutritional quality of food products, while at the same time reducing energy use and unit operations for processing, eliminating wastes and byproducts, reducing water use in harvesting, washing and processing, and using naturally derived ingredients. - Introduces the strategic concept of Green Food Processing to meet the challenges of the future of the food industry - Presents innovative techniques for green food processing that can be used in academia, and in industry in R&D and processing - Brings a multidisciplinary approach, with significant contributions from eminent scientists who are actively working on Green Food Processing techniques
Food processing technologies are an essential link in the food chain. These technologies are many and varied, changing in popularity with changing consumption patterns and product popularity. Newer process technologies are also being evolved to provide the added advantages. Conventional and Advanced Food Processing Technologies fuses the practical (application, machinery), theoretical (model, equation) and cutting-edge (recent trends), making it ideal for industrial, academic and reference use. It consists of two sections, one covering conventional or well-established existing processes and the other covering emerging or novel process technologies that are expected to be employed in the near future for the processing of foods in the commercial sector. All are examined in great detail, considering their current and future applications with added examples and the very latest data. Conventional and Advanced Food Processing Technologies is a comprehensive treatment of the current state of knowledge on food processing technology. In its extensive coverage, and the selection of reputed research scientists who have contributed to each topic, this book will be a definitive text in this field for students, food professionals and researchers.
Feeding our globally expanding population is one of the most critical challenges of our time and improving food and agricultural production efficiencies is a key factor in solving this problem. Currently, one-third of food produced for humans is wasted, and for every pound of food produced, roughly an equal amount of nonfood by-product is also generated, creating a significant environmental impact. In Integrated Processing Technologies for Food and Agricultural By-Products experts from around the world present latest developments, recognizing that while some by-products have found use as animal feed or are combusted for energy, new technologies which integrate conversion of production and processing by-products into higher-value food or nonfood products, nutraceuticals, chemicals, and energy resources will be a critical part of the transition to a more sustainable food system. Organized by agricultural crop, and focusing on those crops with maximum economic impact, each chapter describes technologies for value-added processing of by-products which can be integrated into current food production systems. Integrated Processing Technologies for Food and Agricultural By-Products is a valuable resource for industry professionals, academics, and policy-makers alike. - Provides production-through-processing coverage of key agricultural crops for a thorough understanding and translational inspiration - Describes and discusses major by-product sources, including physical and chemical biomass characterizations and associated variability in detail - Highlights conversions accomplished through physical, biological, chemical, or thermal methods and demonstrates examples of those technologies
The past 30 years have seen the establishment of food engineering both as an academic discipline and as a profession. Combining scientific depth with practical usefulness, this book serves as a tool for graduate students as well as practicing food engineers, technologists and researchers looking for the latest information on transformation and preservation processes as well as process control and plant hygiene topics. - Strong emphasis on the relationship between engineering and product quality/safety - Links theory and practice - Considers topics in light of factors such as cost and environmental issues
