FM 21-11 1943: Basic field manual, first aid for soldiers.(OBSOLETE) "The purpose of this manual is to teach the soldier what he can do for himself or a fellow soldier if injury or sickness occurs when no medical officer or Medical Department soldier is nearby. Information is also given concerning the use of certain supplies which are for the purpose of helping to keep well. This field manual addresses wounds, fractures/dislocations/ sprains, common emergencies and health measures, effects of severe cold and heat, measures for use in the jungle/tropics and in aircraft and tank injuries, transportation of sick and injured, war gases, and description and uses of first-aid kits and packets.
This manual provides guidance for the organization, planning, and conduct of the full range of military operations on urbanized terrain. This publication was prepared primarily for commanders, staffs, and subordinate leaders down to the squad and fire team level. It is written from a Marine air-ground task force perspective, with emphasis on the ground combat element as the most likely supported element in that environment. It provides the level of detailed information that supports the complexities of planning, preparing for, and executing small-unit combat operations on urbanized terrain. It also provides historical and environmental information that supports planning and training for combat in built-up areas
This pioneering text provides a holistic approach to decisionmaking in transportation project development and programming, whichcan help transportation professionals to optimize their investmentchoices. The authors present a proven set of methodologies forevaluating transportation projects that ensures that all costs andimpacts are taken into consideration. The text's logical organization gets readers started with asolid foundation in basic principles and then progressively buildson that foundation. Topics covered include: Developing performance measures for evaluation, estimatingtravel demand, and costing transportation projects Performing an economic efficiency evaluation that accounts forsuch factors as travel time, safety, and vehicle operatingcosts Evaluating a project's impact on economic development and landuse as well as its impact on society and culture Assessing a project's environmental impact, including airquality, noise, ecology, water resources, and aesthetics Evaluating alternative projects on the basis of multipleperformance criteria Programming transportation investments so that resources can beoptimally allocated to meet facility-specific and system-widegoals Each chapter begins with basic definitions and concepts followedby a methodology for impact assessment. Relevant legislation isdiscussed and available software for performing evaluations ispresented. At the end of each chapter, readers are providedresources for detailed investigation of particular topics. Theseinclude Internet sites and publications of international anddomestic agencies and research institutions. The authors alsoprovide a companion Web site that offers updates, data foranalysis, and case histories of project evaluation and decisionmaking. Given that billions of dollars are spent each year ontransportation systems in the United States alone, and that thereis a need for thorough and rational evaluation and decision makingfor cost-effective system preservation and improvement, this textshould be on the desks of all transportation planners, engineers,and educators. With exercises in every chapter, this text is anideal coursebook for the subject of transportation systems analysisand evaluation.
The X-31 Enhanced Fighter Maneuverability Demonstrator was unique among experimental aircraft. A joint effort of the United States and Germany, the X-31 was the only X-plane to be designed, manufactured, and flight tested as an international collaboration. It was also the only X-plane to support two separate test programs conducted years apart, one administered largely by NASA and the other by the U.S. Navy, as well as the first X-plane ever to perform at the Paris Air Show. Flying Beyond the Stall begins by describing the government agencies and private-sector industries involved in the X-31 program, the genesis of the supermaneuverability concept and its initial design breakthroughs, design and fabrication of two test airframes, preparation for the X-31's first flight, and the first flights of Ship #1 and Ship #2. Subsequent chapters discuss envelope expansion, handling qualities (especially at high angles of attack), and flight with vectored thrust. The book then turns to the program's move to NASA's Dryden Flight Research Center and actual flight test data. Additional tasking, such as helmet-mounted display evaluations, handling quality studies, aerodynamic parameter estimation, and a "tailless" study are also discussed.The book describes how, in the aftermath of a disastrous accident with Ship #1 in 1995, Ship #2 was prepared for its outstanding participation in the Paris Air Show. The aircraft was then shipped back to Edwards AFB and put into storage until the late 1990s, when it was refurbished for participation in the U. S. Navy's VECTOR program. The book ends with a comprehensive discussion of lessons learned and includes an Appendix containing detailed information.
This PRINT REPLICA contains the 6th edition of the Test & Evaluation Management Guide (TEMG). The Test & Evaluation Management Guide is intended primarily for use in courses at DAU and secondarily as a generic desk reference for program and project management, and Test & Evaluation (T&E) personnel. It is written for current and potential acquisition management personnel and assumes some familiarity with basic terms, definitions, and processes as employed by the DoD acquisition process. The Test & Evaluation Management Guide is designed to assist Government and industry personnel in executing their management responsibilities relative to the T&E support of defense systems and facilitate learning during Defense Acquisition University coursework. The objective of a well-managed T&E program is to provide timely and accurate information to decision makers and program managers (PMs). The Test & Evaluation Management Guide was developed to assist the acquisition community in obtaining a better understanding of who the decision makers are and determining how and when to plan T&E events so that they are efficient and effective. Why buy a book you can download for free? We print this book so you don't have to. First you gotta find a good clean (legible) copy and make sure it's the latest version (not always easy). Some documents found on the web are missing some pages or the image quality is so poor, they are difficult to read. We look over each document carefully and replace poor quality images by going back to the original source document. We proof each document to make sure it's all there - including all changes. If you find a good copy, you could print it using a network printer you share with 100 other people (typically its either out of paper or toner). If it's just a 10-page document, no problem, but if it's 250-pages, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. It's much more cost-effective to just order the latest version from Amazon.com This book includes original commentary which is copyright material. Note that government documents are in the public domain. We print these large documents as a service so you don't have to. The books are compact, tightly-bound, full-size (8 1/2 by 11 inches), with large text and glossy covers. 4th Watch Publishing Co. is a HUBZONE SDVOSB. https: //usgovpub.com
This absorbing book describes the long development of the Soviet space shuttle system, its infrastructure and the space agency’s plans to follow up the first historic unmanned mission. The book includes comparisons with the American shuttle system and offers accounts of the Soviet test pilots chosen for training to fly the system, and the operational, political and engineering problems that finally sealed the fate of Buran and ultimately of NASA’s Shuttle fleet.
During warfighter exercises, it had become apparent that division and corps commanders were challenged with mission command of forces in their support areas. The commander of United States Army Forces Command directed commanders to establish a support area command post (SACP) to improve mission command. The Army's new Field Manual (FM) 3-0, Operations (06 OCT 2017), incorporates this guidance by modifying the geographical organization of an area of operations. FM 3-0 scales down the size of the support area and adds a consolidation area. The consolidation area will be assigned to a maneuver brigade or division. This enables the maneuver enhancement brigade (MEB) to perform its traditional mission and focus efforts on operations in the support area. FM 3-0 formalizes the requirement for divisions and corps to establish a SACP (its doctrinal name, which is used throughout this handbook) to assist in controlling operations in the support and consolidation areas.
The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
