Today's best practice in environmental mine-waste management requires a thorough understanding of the wastes produced. The knowledge of mine wastes represents a new interdisciplinary science and this book provides an introductory, descriptive and analytic overview of the wastes produced in the mineral industry. It describes the characterization, prediction, monitoring, disposal and treatment as well as environmental impacts. Intended for undergraduate courses, it systematically builds the reader’s understanding and knowledge of the wastes produced, their physical and chemical characteristics, and how to deal responsibly with them on a short and long-term basis. The text employs 22 case studies spanning the world’s mineral industry that elucidate best practice and specific challenges in mine-waste management and site rehabilitation.
The book is a comprehensive treatment of the application of geotechnical engineering to site selection, site exploration, design, operation and closure of mine waste storage facilities.The level and content are suitable as a technical source and reference for practising engineers engaged both in the design and operational management of mine waste s
This book introduces recent development of technologies for mine waste management in China. For hard rock mines, the main mine wastes are tailings, and the tailings can be disposed above-ground and/or underground. The technology of consolidated tailings stockpile (CTS) that disposes tailings above-ground is introduced, and the application of this technology is also demonstrated. Besides, the technology of cemented tailings (or paste) backfill (CTB or CPB) which deals with tailings underground is also discussed. The properties of CTB materials and the utilization of CTB technology are described and analyzed. For coal mines, the main mine wastes are coal gangue and fly ash. The technology of cemented coal gangue-fly ash backfill (CGFB) that manages coal mine waste underground is presented. The THMC coupling properties of CGFB materials are investigated, which can contribute to a better design of stable, durable and environmentally friendly CGFB mixtures. The application of CGFB technology in a coal mine is also presented. This book, which systematically reviews and discusses the development of mine waste management technologies in China, is expected to provide readers comprehensive information about mine waste management.
This open access book presents papers displayed in the 2nd International Conference on Energy and Sustainable Futures (ICESF 2020), co-organised by the University of Hertfordshire and the University Alliance DTA in Energy. The research included in this book covers a wide range of topics in the areas of energy and sustainability including: • ICT and control of energy;• conventional energy sources;• energy governance;• materials in energy research;• renewable energy; and• energy storage. The book offers a holistic view of topics related to energy and sustainability, making it of interest to experts in the field, from industry and academia.
Papers on mine and mill tailings and mine waste, as well as current and future issues facing the mining end environmental communities, are included and discussed in this text. The subjects covered relate to technical capabilities and developments, regulations, and environmental concerns.
Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.
Re-imagine the Future of Tailings Nearly every recent article on tailings starts by mentioning a large tailings dam failure. The consequences of these failures have been so devastating they have pushed conversations about the risks inherent in these structures beyond the mining community into the general population. We are left to question how we address the risks associated with tailings disposal, and in so doing, transform the image of the mining industry and perhaps the industry itself. With this as a backdrop, the Society for Mining, Metallurgy & Exploration (SME) challenged tailings and mining professionals to re-imagine the future of tailings. The Mine Tailings: Perspectives for a Changing World symposium, held at the SME 2020 annual conference, started that conversation. Over three days, tailings professionals from around the world gathered to discuss tailings storage practices and the changes both the industry and the world want and need. The discussions squarely focused on how we, as an industry, can collectively make changes that will eliminate catastrophic tailings dam failures and lead to better outcomes for the industry and society. Through sharing and conversation, the symposium participants recognized risks associated with our approach to tailings management and existing structures and discussed the gaps that need to be addressed, including how the behavior of tailings and mining professionals must change. The human element of risk must be recognized so it can be talked about openly, given the attention it deserves, and adequately addressed. We need to own this problem and the impact of our actions. We have the power to change this; when we own our actions, we can act differently for a different outcome.
The proceedings in this work present 60 papers on mine and mill tailings and mine waste, as well as current and future issues facing the mining and environmental communities. This includes matters dealing with technical capabilities and developments, regulations, and environmental concerns.
As long as we have mining and mineral processing, tailings and the responsible management thereof will remain at the forefront, with a company’s environmental, social, and governance (ESG) performance in part a reflection of how well tailings risks are being managed. The Global Industry Standard on Tailings Management (GISTM) was published in August 2020, aiming to prevent catastrophic failure of tailings facilities by providing operators with specified measures and approaches throughout the mine life cycle, taking into account multiple stakeholder perspectives. In 2021, the International Council on Mining & Metals (ICMM) published the Tailings Management: Good Practice Guide intended to support safe, responsible management of tailings across the global mining industry, providing guidance on good governance and engineering practices to support continual improvement in tailings storage facility (TSF) management and help foster and strengthen the safety culture of mining companies. The Tailings Management Handbook is important and timely because there is no other comprehensive resource rooted in these new fundamentals and global principles for tailings management. Tailings management requires interdisciplinary and cross-functional understanding and support, which is apparent throughout this handbook. Dive into the wealth of information contributed by more than 100 world-renowned experts, beautifully crafted into a full-color handbook that focuses on the basics, life-cycle planning, site and tailings characterization, TSF design and construction, as well as systems and operations of TSFs. The inclusion of 42 case studies is an added plus with real-world successes and lessons learned.
