Surface Modification and Alloying

Surface Modification and Alloying

Author: J.M. Poate

Publisher: Springer Science & Business Media

Published: 2013-11-21

Total Pages: 413

ISBN-13: 146133733X

DOWNLOAD EBOOK

This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.


Metal-Catalysed Reactions of Hydrocarbons

Metal-Catalysed Reactions of Hydrocarbons

Author: Geoffrey C. Bond

Publisher: Springer Science & Business Media

Published: 2006-10-03

Total Pages: 677

ISBN-13: 0387261117

DOWNLOAD EBOOK

This unique book, drawing on the author’s lifetime experience, critically evaluates the extensive literature on the field of Metal-Catalysed Reactions of Hydrocarbons. Emphasis is placed on reaction mechanisms involving hydrogenation, hydrogenolysis, skeletal and positional isomerisation, and exchange reactions. The motivation for fundamental research in heterogeneous catalysis is to identify the physicochemical characteristics of active centres for the reaction being studied, to learn how these may be modified or manipulated to improve the desired behavior of the catalyst, and to recognize and control those aspects of the catalyst's structure that limit its overall performance. By restricting the subject of the book to hydrocarbons, Bond has progressively developed the subject matter to include areas of importance both to researchers and to those working in the industry.


Oriented Crystallization on Amorphous Substrates

Oriented Crystallization on Amorphous Substrates

Author: E.I. Givargizov

Publisher: Springer Science & Business Media

Published: 2013-11-21

Total Pages: 377

ISBN-13: 1489925600

DOWNLOAD EBOOK

Present-day scienceand technology have become increasingly based on studies and applications of thin films. This is especiallytrue of solid-state physics, semiconduc tor electronics, integrated optics, computer science, and the like. In these fields, it is necessary to use filmswith an ordered structure, especiallysingle-crystallinefilms, because physical phenomena and effects in such films are most reproducible. Also, active parts of semiconductor and other devices and circuits are created, as a rule, in single-crystal bodies. To date, single-crystallinefilms have been mainly epitaxial (or heteroepitaxial); i.e., they have been grown on a single-crystalline substrate, and principal trends, e.g., in the evolution of integrated circuits (lCs), have been based on continuing reduction in feature size and increase in the number of components per chip. However, as the size decreases into the submicrometer range, technological and physical limitations in integrated electronics become more and more severe. It is generally believed that a feature size of about 0.1um will have a crucial character. In other words, the present two-dimensional ICs are anticipated to reach their limit of minimization in the near future, and it is realized that further increase of packing density and/or functions might depend on three-dimensional integration. To solve the problem, techniques for preparation of single-crystalline films on arbitrary (including amorphous) substrates are essential.


Handbook of Industrial Catalysts

Handbook of Industrial Catalysts

Author: Lawrie Lloyd

Publisher: Springer Science & Business Media

Published: 2011-07-26

Total Pages: 506

ISBN-13: 0387499628

DOWNLOAD EBOOK

Much has been written about fundamental aspects of catalysis, yet despite their universal applications details concerning commercial catalysts and information about actual operating conditions are not readily available. This book provides up-to-date reviews and references to guide those working on industrial catalysts. It will be an invaluable guide for catalysis researchers in industry and academia, and for students.


Chemical Kinetics and Catalysis

Chemical Kinetics and Catalysis

Author: R.A. van Santen

Publisher: Springer Science & Business Media

Published: 2013-06-29

Total Pages: 290

ISBN-13: 1475796439

DOWNLOAD EBOOK

to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitively expensive. There are few chemical-or oil-based material items in modem society that do not depend in some way on a catalytic stage in their manufacture. Apart from manu facturing processes, catalysis is finding other important and ever-increasing uses; for example, successful applications of catalysis in the control of pollution and its use in environmental control are certain to increase in the future. The commercial importance of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists, including chemists, physicists, chemical engineers, and material scientists. Increas ing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recently as sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 1950s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth. In view of this situation, we felt there was a need for a collection of monographs, each one of which would deal at an advanced level with a selected topic, so as to build a catalysis reference library.


Application of Particle and Laser Beams in Materials Technology

Application of Particle and Laser Beams in Materials Technology

Author: P. Misaelides

Publisher: Springer Science & Business Media

Published: 2013-03-09

Total Pages: 668

ISBN-13: 9401584591

DOWNLOAD EBOOK

The development of advanced materials with preselected properties is one of the main goals of materials research. Of especial interest are electronics, high-temperature and supemard materials for various applications, as well as alloys with improved wear, corrosion and mechanical resistance properties. The technical challenge connected with the production of these materials is not only associated with the development of new specialised preparation techniques but also with quality control. The energetic charged particle, electron and photon beams offer the possibility of modifying the properties of the near-surface regions of materials without seriously affecting their bulk, and provide unique analytical tools for testing their qUality. This volume includes most of the lectures and contributions delivered at the NATO-funded Advanced Study Institute "Application of Particle and Laser Beams in Materials Technology", which was held in Kallithea, Chalkidiki, in Northern Greece, from the 8th to the 21st of May, 1994 and attended by 73 participants from 21 countries. The aim of this ASI was to provide to the participants an overview of this rapidly expanding field. Fundamental aspects concerning the interactions and collisions on atomic, nuclear and solid state scale were presented in a didactic way, along with the application of a variety of techniques for the solution of problems ranging from the development of electronics materials to corrosion research and from archaeometry to environmental protection.


Trichier

Trichier

Author: Alessandra Ceretto

Publisher: Lulu.com

Published:

Total Pages: 192

ISBN-13: 136509796X

DOWNLOAD EBOOK


Catalytic Ammonia Synthesis

Catalytic Ammonia Synthesis

Author: J.R. Jennings

Publisher: Springer Science & Business Media

Published: 2013-06-29

Total Pages: 462

ISBN-13: 1475795920

DOWNLOAD EBOOK

The phenomenon of catalysis is found in many homogeneous and heterogeneous systems undergoing chemical change, where it effects the rates of approach to the equilibrium state in processes as diverse as those found in the stars, the earth's mantle, living organisms, and the various chemistries utilized by industry. The economies and the living standards of both developed and developing countries depend to varying degrees upon the efficacy of their chemical industries. Con sequently, this century has seen a wide exploration and expansion of catalytic chemistry together with an intensive investigation of specific, essential processes like those contributing to life-supporting agricultures. Prime among the latter must surely be the "fixation" of atmospheric nitrogen by catalytic hydrogenation to anhydrous ammonia, still the preferred synthetic precursor of the nitrogenous components of fertilizers. In each decade contemporary concepts and techniques have been used to further the understanding, as yet incomplete, of the catalyst, the adsorbates, the surface reactions, and the technology of large-scale operation. The contributors to the present volume review the state of the art, the science, and the technology; they reveal existing lacunae, and suggest ways forward. Around the turn of the century, Sabatier's school was extending the descriptive catalytic chemistry of hydrogenation by metals to include almost all types of multiple bond. The triple bond of dinitrogen, which continued to be more resistant than the somewhat similar bonds in carbon monoxide and ethyne, defied their efforts.