This guide is designed to provide direction on the monitoring of traffic characteristics. It begins with a discussion of the structure of traffic characteristics monitoring and traffic counting. The next two sections cover vehicle classification and truck weighing. The last section presents the coordinated record formats for station identification, traffic volume, vehicle classification, and truck weight data.
This report identifies potential improvements in terms of more effective safety and environmental regulation for trucks, backed by better systems of enforcement, and identifies opportunities for greater efficiency and higher productivity.
This book gathers the proceedings of an international conference held at Empa (Swiss Federal Laboratories for materials Science and Technology) in Dübendorf, Switzerland, in July 2020. The conference series was established by the International Society of Maintenance and Rehabilitation of Transport Infrastructure (iSMARTi) for promoting and discussing state-of-the-art design, maintenance, rehabilitation and management of pavements. The inaugural conference was held at Mackenzie Presbyterian University in Sao Paulo, Brazil, in 2000. The series has steadily grown over the past 20 years, with installments hosted in various countries all over the world. The respective contributions share the latest insights from research and practice in the maintenance and rehabilitation of pavements, and discuss advanced materials, technologies and solutions for achieving an even more sustainable and environmentally friendly infrastructure.
Weigh-in-motion (WIM) is a process of measuring the dynamic tire forces of a moving vehicle and estimating the corresponding tire loads of the static vehicle. This collection of lectures from the International Conference on Weigh-in-Motion details applications such as: collection of statistical traffic data, support of commercial vehicle enforcement, roadway and bridge cost allocation, and traffic management.
This book offers a valuable guide for practicing bridge engineers and graduate students in structural engineering; its main purpose is to present the latest concepts in bridge engineering in fairly easy-to-follow terms. The book provides details of easy-to-use computer programs for: · Analysing slab-on-girder bridges for live load distribution. · Analysing slab and other solid bridge components for live load distribution. · Analysing and designing concrete deck slab overhangs of girder bridges under vehicular loads. · Determining the failure loads of concrete deck slabs of girder bridges under concentrated wheel loads. In addition, the book includes extensive chapters dealing with the design of wood bridges and soil-steel bridges. Further, a unique chapter on structural health monitoring (SHM) will help bridge engineers determine the actual load carrying capacities of bridges, as opposed to their perceived analytical capacities. The chapter addressing structures made with fibre-reinforced polymers will allow engineers to design highly durable, economical and sustainable structures. This chapter also provides guidance on rehabilitating deteriorated structures with these new materials. The book also deals with the philosophy of bridge design without resorting to complex equations. Additional material to this book can be downloaded from http://extras.springer.com
Part I introduces the basic “Principles and Methods of Force Measurement” according to a classification into a dozen of force transducerstypes: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the “(Strain Gauge) Force Transducers Components”, evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the “heart” of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum place of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field.
PAVEMENT DESIGN AND MATERIALS Practical guide for all aspects of pavement engineering, updated with the latest techniques, standards, and software The newly revised and updated Second Edition of Pavement Design and Materials offers a comprehensive treatment of pavement materials, structural analysis, design, evaluation, and economic analysis of asphalt and portland concrete pavements. Written by two highly qualified engineering professors with a wealth of experience in the field, Pavement Design and Materials provides readers with: State-of-the-art techniques for material characterization, including a linear viscoelasticity primer Methods and software for the analysis of flexible and ridgid pavements including the AASHTOWare Pavement ME Design State-of-the-art pavement evaluation techniques including moduli backcalculation methods Pavement economic analysis techniques including the most up-to-date user cost relationships. The book companion website provides: Solved examples in each chapter and the electronic files associated with them An instructor solutions manual for the problems provided at the end of each chapter PowerPoint presentations by chapter to facilitate lecture delivery Pavement Design and Materials is an essential up-to-date textbook on the subject for upper-level undergraduate and graduate level courses on pavement materials and pavement design. It is also a valuable reference for practicing professional engineers involved in the various aspects of roadway pavement material selection and structural design.
