Describes international approaches for maintaining fuel subcritical, removing residual heat, providing radiation protection and containing radioactive materials for the lifetime of a facility. It is intended to provide details on the safety assessment of interim spent fuel storage facilities that are not an integral part of an operating plant.
This publication is a revision by amendment of IAEA Safety Standards Series No. SSG-15 and provides recommendations and guidance on the storage of spent nuclear fuel. It covers all types of storage facility and all types of spent fuel from nuclear power plants and research reactors. It takes into consideration the longer storage periods beyond the original design lifetime of the storage facility that have become necessary owing to delays in the development of disposal facilities and the reduction in reprocessing activities. It also considers developments associated with nuclear fuel, such as higher enrichment, mixed oxide fuels and higher burnup. Guidance is provided on all stages in the lifetime of a spent fuel storage facility, from planning through siting and design to operation and decommissioning. The revision was undertaken by amending, adding and/or deleting specific paragraphs addressing recommendations and findings from studying the accident at the Fukushima Daiichi nuclear power plant in Japan.
This new report from the National Research Council's Nuclear and Radiation Studies Board (NRSB) and the Transportation Research Board reviews the risks and technical and societal concerns for the transport of spent nuclear fuel and high-level radioactive waste in the United States. Shipments are expected to increase as the U.S. Department of Energy opens a repository for spent fuel and high-level waste at Yucca Mountain, and the commercial nuclear industry considers constructing a facility in Utah for temporary storage of spent fuel from some of its nuclear waste plants. The report concludes that there are no fundamental technical barriers to the safe transport of spent nuclear fuel and high-level radioactive and the radiological risks of transport are well understood and generally low. However, there are a number of challenges that must be addressed before large-quantity shipping programs can be implemented successfully. Among these are managing "social" risks. The report does not provide an examination of the security of shipments against malevolent acts but recommends that such an examination be carried out.
This publication identifies issues and challenges relevant to the development and implementation of options, policies, strategies and programmes for ensuring safe, secure, and effective storage of spent fuel until transport for reprocessing or disposal. The target audience of this publication includes policy and decision makers who need to be aware of the implicit risks and costs associated with decision timing for determining and implementing an end point for spent fuel management (such as reprocessing or disposal) to ensure the responsible and sustainable use of nuclear energy. The publication will assist those within the nuclear industry in communicating the importance of a clear, credible and sustainable spent fuel management strategy and will encourage decision makers to consider different approaches that may be useful in addressing the uncertainties resulting from an unknown storage duration and an undefined end point for spent fuel management.
This Safety Guide provides recommendations and guidance on the storage of spent nuclear fuel. It covers all types of storage facilities and all types of spent fuel from nuclear power plants and research reactors. It takes into consideration the longer storage periods that have become necessary owing to delays in the development of disposal facilities and the decrease in reprocessing activities. It also considers developments associated with nuclear fuel, such as higher enrichment, mixed oxide fuels and higher burnup. The Safety Guide is not intended to cover the storage of spent fuel if this is part of the operation of a nuclear power plant or spent fuel reprocessing facility. Guidance is provided on all stages for spent fuel storage facilities, from planning through siting and design to operation and decommissioning, and in particular retrieval of spent fuel.
This publication is a revision by amendment of IAEA Safety Standards Series No. SSG-15 and provides recommendations and guidance on the storage of spent nuclear fuel. It covers all types of storage facility and all types of spent fuel from nuclear power plants and research reactors. It takes into consideration the longer storage periods beyond the original design lifetime of the storage facility that have become necessary owing to delays in the development of disposal facilities and the reduction in reprocessing activities. It also considers developments associated with nuclear fuel, such as higher enrichment, mixed oxide fuels and higher burnup. Guidance is provided on all stages in the lifetime of a spent fuel storage facility, from planning through siting and design to operation and decommissioning. The revision was undertaken by amending, adding and/or deleting specific paragraphs addressing recommendations and findings from studying the accident at the Fukushima Daiichi nuclear power plant in Japan.
On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
This publication is a new edition of Technical Reports Series No. 240, Guidebook on Spent Fuel Storage (1991). It aims to provide guidance on spent fuel storage options, describing the history and observed trends of spent fuel storage technologies, gathering operational experiences and lessons learned. The evolving aspects related to higher burnup and mixed oxide (MOX) spent fuel, and the extension of storage timeframes are detailed. It also includes information on the distribution of the current global inventory of spent fuel by storage systems, a description of (and terminology relating to) available spent fuel storage technologies and different storage facility locations.
This Safety Standards Series Guide supersedes Safety Series No. 50-SG-D10 with the same title issued in 1984. The Purpose of this Safety Guide is to provide detailed recommendations for the design of fuel handling and storage systems in nuclear power plants. This publication is intended for use by organizations designing, manufacturing, constructing and operating fuel handling and storage facilities in nuclear power plants, as well as by regulatory bodies.
Reliability and Probabilistic Safety Assessment in Multi-Unit Nuclear Power Plants presents the risk contributions from single and multi-unit Nuclear Power Plants to help aggregate the risks that may arise due to applicable hazards and operating states. The book combines the key features of multi-unit risk assessment in one resource, reviewing the practices adopted in various countries around the globe to exemplify the dependencies between units on a site. These dependencies include multi-unit interactions, environmental stresses, the sharing of systems, and the sharing of human resource in a control room, factors which can all introduce an increase potential for heightened accident conditions. This book helps readers systematically identify events and evaluate techniques of possible accident outcomes within multi-units. It serves as a ready reference for PSA analysts in identifying a suitable site and the sharing of resources, while carrying out multi-unit risk assessments to ensure the safety of the public and the environment. It will also be valuable for nuclear researchers, designers and regulators of nuclear power plants, nuclear regulatory agencies, PSA engineers and practicing safety professionals. - Provides a framework for nuclear and PSA researchers and professionals on the design and operation of multi-unit risk assessments - Reviews practices adopted in various regions around the globe to analyze dependencies between units - Includes modeling techniques of inter-connections and shared resources, as well as risk aggregation
