Rubber analysis plays a vital part in ensuring that manufactured products are fit for purpose. This comprehensive, application-based book with up-to-date referencing covers all important applications and subject area associated with the analysis of rubber compounds and rubber products. Includes characterization of rubber polymers, rubber fumes, identification of extractables and leachables, as well as reverse engineering on compounded products.
This review outlines each technique used in rubber analysis and then illustrates which methods are applied to determine which facts. This d104 is a good introduction to a very complex subject area and will enable the reader to understand the basic concepts of rubber analysis. Around 350 abstracts from the Rapra Polymer Library database accompany this review, to facilitate further reading. These include core original references together with abstracts from some of the latest papers on rubber analysis.
Rubber analysis plays a vital part in ensuring that manufactured products are fit for purpose. This comprehensive, application-based book with up-to-date referencing covers all important applications and subject area associated with the analysis of rubber compounds and rubber products. Includes characterization of rubber polymers, rubber fumes, identification of extractables and leachables, as well as reverse engineering on compounded products.
Rubber is important in many engineering applications because of its unique properties. These properties must be measured with appropriate test methods developed specifically for this class of materials. This book provides, in one volume, comprehensive coverage of the procedures for measuring the whole range of the physical properties of rubber. This new edition presents an up-to-date introduction to the standard methods used for testing, quality control analysis, product evaluation, and production of design data for rubber and elastomers. Factors to be incorporated in the revision include the effects of newer instrumentation, the cutting back of laboratory staff, increased demands for formal accreditation and calibration, trend to product testing, overlap of thermoplastic elastomers with plastics and increased need for design data.
The first edition of this book (1958) described an analytical situation which had existed for a number of years for maintaining quality control on vulcanizates of natural rubber although the situation had recently been disturbed by the introduction of a range of synthetic rubbers which required identification and quantitative estimation. For the former purpose 'wet' chemistry, based on various imperfectly understood organic reactions, was pressed into service. Alongside this was the first introduction of instrumental analysis, using the infrared spectra of either the polymers or, more usually, their pyrolytic products to 'fingerprint' the material. The identification of a range of organic accelerators, antioxidants and their derivatives which had been intro duced during the 1920s and 30s was, in the first edition, dealt with by a combination of column chromatography and infrared spectroscopy or by paper chromatography. Quantitative procedures were, however, still classical in the tradition of gravimetric or volumetric assays with an initially weighed sample yielding, after chemical manipulation, a carefully precipitated, dried and weighed end product, or a solution of known composition whose weight or titre, as a percentage of the initial sample, quantified the function being determined. The second edition of this work (1968) consolidated the newer techni ques which had been introduced in the first without adding to them although, in other applications of analytical chemistry, instrumental analysis had already brought about a transformation in laboratory practice.
Reasons for testing rubber materials and products fall into four categories: quality control, provision of design data, prediction of service performance and investigation of failure. Test methods have been standardised for almost all properties likely to be relevant to rubbers, and the appropriate standards are listed in this report. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
