In large surface mining operations, drilling and blasting activities constitute more than 15% of the total costs. In order to optimize performance and minimize costs, a thorough knowledge of drill and blast operations is, therefore, extremely important.In this unique reference volume, rotary blasthole drilling and surface blasting, as applied in la
Collects a wealth of material about all phases of drilling into three manuals. Although primarily designed for industry personnel or college students studying petroleum technology, it is useful for anyone who wants or needs to know more about rotary drilling. The Drilling Technology Series consists of three manuals of material similar to that in the Drilling Technology Correspondence Courses. Based on the material in the second edition of the Rotary Drilling Series, these books are both more condensed and more technical than the drilling series. This series responds to the need for more detailed explanation of drilling procedures and the math used in connection with them. Review questions are provided. This segment starts where it all begins -- in the earth's subsurface, where oil and gas form and accumulate. Once basic geological concepts are explained, the segment moves on to a thorough explanation and description of the rotary rig and its components, focusing on the mud system, the drill stem, and the bit.
The study of the solid part of the earth on which structures are built is an essential part of the training of a civil engineer. Geotechnical processes such as drilling, pumping and injection techniques enhance the viability of many construction processes by improving ground conditions. Highlighting the ground investigation necessary for the process, the likely improvement in strength of treated ground and testing methods An Introduction to Geotechnical Processes covers the elements of ground treatment and improvement, from the control of groundwater, drilling and grouting to ground anchors and electro-chemical hardening.
The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal
This series covers the entire scope of rotary drilling operations in five units of technical information and review questions. These units are published in cooperation with the International Association of Drilling Contractors. In some cases, previous editions are available in Spanish, while supplies last, for $14. Open-book comprehensive tests covering Units I, II, III, and V of the Rotary Drilling Series are available. This totally new lesson combines Mud Pumps and Conditioning Equipment and Circulating Systems. It offers a better understanding of the operation, care, and maintenance of mud pumps and mud conditioning equipment. Discusses the composition, testing, and treatment of drilling fluids and the route of circulation. All measurements are given in both U.S. and SI units. Many illustrations, a complete glossary, and review questions and answers are also provided.
Covers types of casing and API standards for casing, string design, and running casing; discusses oilwell cementing, API classes of cement, and additives and special cements.
An Invaluable Reference for Members of the Drilling Industry, from Owner–Operators to Large Contractors, and Anyone Interested In Drilling Developed by one of the world’s leading authorities on drilling technology, the fifth edition of The Drilling Manual draws on industry expertise to provide the latest drilling methods, safety, risk management, and management practices, and protocols. Utilizing state-of-the-art technology and techniques, this edition thoroughly updates the fourth edition and introduces entirely new topics. It includes new coverage on occupational health and safety, adds new sections on coal seam gas, sonic and coil tube drilling, sonic drilling, Dutch cone probing, in hole water or mud hammer drilling, pile top drilling, types of grouting, and improved sections on drilling equipment and maintenance. New sections on drilling applications include underground blast hole drilling, coal seam gas drilling (including well control), trenchless technology and geothermal drilling. It contains heavily illustrated chapters that clearly convey the material. This manual incorporates forward-thinking technology and details good industry practice for the following sectors of the drilling industry: Blast Hole Environmental Foundation/Construction Geotechnical Geothermal Mineral Exploration Mineral Production and Development Oil and Gas: On-shore Seismic Trenchless Technology Water Well The Drilling Manual, Fifth Edition provides you with the most thorough information about the "what," "how," and "why" of drilling. An ideal resource for drilling personnel, hydrologists, environmental engineers, and scientists interested in subsurface conditions, it covers drilling machinery, methods, applications, management, safety, geology, and other related issues.
