District Heating and Cooling Networks in the European Union
District Heating and Cooling Networks in the European Union

Author: Antonio Colmenar-Santos

Publisher: Springer

Published: 2017-07-18

Total Pages: 156

ISBN-13: 3319579525

DOWNLOAD EBOOK

This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.

District Energy in Cities
District Energy in Cities

Author: United Nations Publications

Publisher: UN

Published: 2017-03-29

Total Pages: 137

ISBN-13: 9789211587326

DOWNLOAD EBOOK

This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.

Advances in Solar Heating and Cooling
Advances in Solar Heating and Cooling

Author: Ruzhu Wang

Publisher: Woodhead Publishing

Published: 2016-05-25

Total Pages: 598

ISBN-13: 0081003021

DOWNLOAD EBOOK

Advances in Solar Heating and Cooling presents new information on the growing concerns about climate change, the security of energy supplies, and the ongoing interest in replacing fossil fuels with renewable energy sources. The amount of energy used for heating and cooling is very significant, estimated, for example, as half of final energy consumption in Europe. Solar thermal installations have the potential to meet a large proportion of the heating and cooling needs of both buildings and industry and the number of solar thermal installations is increasing rapidly. This book provides an authoritative review of the latest research in solar heating and cooling technologies and applications. - Provides researchers in academia and industry with an authoritative overview of heating and cooling for buildings and industry in one convenient volume - Part III, 'Solar cooling technologies' is contributed by authors from Shanghai Jiao Tong University, which is a world-leader in this area - Covers advanced applications from zero-energy buildings, through industrial process heat to district heating and cooling

Renewable Heating and Cooling
Renewable Heating and Cooling

Author: Gerhard Stryi-Hipp

Publisher: Elsevier

Published: 2015-11-20

Total Pages: 292

ISBN-13: 1782422188

DOWNLOAD EBOOK

Renewable Heating and Cooling: Technologies and Applications presents the latest information on the generation of heat for industry and domestic purposes, an area where a significant proportion of total energy is consumed. In Europe, this figure is estimated to be almost 50%, with the majority of heat generated by the consumption of fossil fuels. As there is a pressing need to increase the uptake of renewable heating and cooling (RHC) to reduce greenhouse gas emissions, this book provides a comprehensive and authoritative overview on the topic. Part One introduces key RHC technologies and discusses RHC in the context of global heating and cooling demand, featuring chapters on solar thermal process heat generation, deep geothermal energy, and solar cooling technologies. Part Two explores enabling technologies, special applications, and case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC, along with case studies in China and Sweden. Users will find this book to be an essential resource for lead engineers and engineering consultants working on renewable heating and cooling in engineering companies, as well as academics and R&D professionals in private research institutes who have a particular interest in the subject matter. - Includes coverage on biomass, solar thermal, and geothermal renewable heating and cooling technologies - Features chapters on solar thermal process heat generation, deep geothermal energy, solar cooling technologies, and special applications - Presents case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC - Explores enabling technologies and special applications

Renewable Energy Utilization Using Underground Energy Systems
Renewable Energy Utilization Using Underground Energy Systems

Author: Paweł Ocłoń

Publisher: Springer Nature

Published: 2021-06-25

Total Pages: 182

ISBN-13: 3030752283

DOWNLOAD EBOOK

This book discusses heat transfer in underground energy systems. It covers a wide range of important and practical topics including the modeling and optimization of underground power cable systems, modeling of thermal energy storage systems utilizing waste heat from PV panels cooling. Modeling of PV pannels with cooling. While the performance of energy systems which utilize heat transfer in the ground is not yet fully understood, this book attempts to make sense of them. It provides mathematical modeling fundaments, as well as experimental investigation for underground energy systems. The book shows detailed examples, with solution procedures. The solutions are based on the Finite Element Method and the Finite Volume Method. The book allows the reader to perform a detailed design of various underground energy systems, as well as enables them to study the economic aspects and energy efficiency of underground energy systems. Therefore, this text is of interest to researchers, students, and lecturers alike.

Advanced District Heating and Cooling (DHC) Systems
Advanced District Heating and Cooling (DHC) Systems

Author: Robin Wiltshire

Publisher: Woodhead Publishing

Published: 2015-08-31

Total Pages: 365

ISBN-13: 1782423958

DOWNLOAD EBOOK

Advanced District Heating and Cooling (DHC) Systems presents the latest information on the topic, providing valuable information on the distribution of centrally generated heat or cold energy to buildings, usually in the form of space heating, cooling, and hot water. As DHC systems are more efficient and less polluting than individual domestic or commercial heating and cooling systems, the book provides an introduction to DHC, including its potential contribution to reducing carbon dioxide emissions, then reviews thermal energy generation for DHC, including fossil fuel-based technologies, those based on renewables, and surplus heat valorization. Final sections address methods to improve the efficiency of DHC. - Gives a comprehensive overview of DHC systems and the technologies and energy resources utilized within these systems - Analyzes the various methods used for harnessing energy to apply to DHC systems - Ideal resource for those interested in district cooling, teleheating, heat networks, distributed heating, thermal energy, cogeneration, combined heat and power, and CHP - Reviews the application of DHC systems in the field, including both the business model side and the planning needed to implement these systems

Advances in Thermal Energy Storage Systems
Advances in Thermal Energy Storage Systems

Author: Luisa F. Cabeza

Publisher: Elsevier

Published: 2014-10-31

Total Pages: 623

ISBN-13: 1782420967

DOWNLOAD EBOOK

Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems. - Reviews sensible heat storage technologies, including the use of water, molten salts, concrete and boreholes - Describes latent heat storage systems and thermochemical heat storage - Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry

A Handbook on Low-Energy Buildings and District-Energy Systems
A Handbook on Low-Energy Buildings and District-Energy Systems

Author: L.D. Danny Harvey

Publisher: Routledge

Published: 2012-08-21

Total Pages: 717

ISBN-13: 113657302X

DOWNLOAD EBOOK

Winner of Choice Magazine - Outstanding Academic Titles for 2007 Buildings account for over one third of global energy use and associated greenhouse gas emissions worldwide. Reducing energy use by buildings is therefore an essential part of any strategy to reduce greenhouse gas emissions, and thereby lessen the likelihood of potentially catastrophic climate change. Bringing together a wealth of hard-to-obtain information on energy use and energy efficiency in buildings at a level which can be easily digested and applied, Danny Harvey offers a comprehensive, objective and critical sourcebook on low-energy buildings. Topics covered include: thermal envelopes, heating, cooling, heat pumps, HVAC systems, hot water, lighting, solar energy, appliances and office equipment, embodied energy, buildings as systems and community-integrated energy systems (cogeneration, district heating, and district cooling). The book includes exemplary buildings and techniques from North America, Europe and Asia, and combines a broad, holistic perspective with technical detail in an accessible and insightful manner.

Advanced Concepts for Renewable Energy Supply of Data Centres
Advanced Concepts for Renewable Energy Supply of Data Centres

Author: Jaume Salom

Publisher: CRC Press

Published: 2022-09-01

Total Pages: 337

ISBN-13: 1000799352

DOWNLOAD EBOOK

The rapid increase of cloud computing, high performance computing (HPC) and the vast growth in Internet and Social Media use have aroused the interest in energy consumption and the carbon footprint of Data Centres. Data Centres primarily contain electronic equipment used for data processing (servers), data storage (storage equipment), and communications (network equipment). Collectively, this equipment processes, stores, and transmits digital information and is known as information technology (IT) equipment. Advanced Concepts for Renewable Energy Supply of Data Centres introduces a number of technical solutions for the supply of power and cooling energy into Data Centres with enhanced utilisation of renewable energy sources in order to achieve low energy Data Centres. Because of the high energy density nature of these unique infrastructures, it is essential to implement energy efficiency measures and reduce consumption before introducing any renewable energy source. A holistic approach is used with the objective of integrating many technical solutions such as management of the IT (Information Technology) load, efficient electrical supply to the IT systems, Low-Ex air-conditioning systems, interaction with district heating and cooling networks, re-use of heat, free cooling (air, seawater, groundwater), optimal use of heat and cold storage, electrical storage and integration in smart grids. This book is therefore a catalogue of advanced technical concepts that could be integrated into Data Centres portfolio in order to increase the overall efficiency and the share of renewable energies in power and cooling supply. Based on dynamic energy models implemented in TRNSYS some concepts are deeply evaluated through yearly simulations. The results of the simulation are illustrated with Sankey charts, where the energy flows per year within the subsystems of each concept for a selected scenario are shown, and graphs showing the results of parametric analysis. A set of environmental metrics (as the non-renewable primary energy) and financial metrics (CAPEX and OPEX) as well of energy efficiency metrics like the well-known PUE, are described and used to evaluate the different technical concepts.