Designed for classroom use, this book contains short, self-contained mathematical models of problems in the physical, mathematical, and biological sciences first published in the Classroom Notes section of the SIAM Review from 1975-1985. The problems provide an ideal way to make complex subject matter more accessible to the student through the use of concrete applications. Each section has extensive supplementary references provided by the editor from his years of experience with mathematical modelling.
Descriptions of summer research programs: The AIM REU: Individual projects with a common theme by D. W. Farmer The Applied Mathematical Sciences Summer Institute by E. T. Camacho and S. A. Wirkus Promoting research and minority participantion via undergraduate research in the mathematical sciences. MTBI/SUMS-Arizona State University by C. Castillo-Chavez, C. Castillo-Garsow, G. Chowell, D. Murillo, and M. Pshaenich Summer mathematics research experience for undergraduates (REU) at Brigham Young University by M. Dorff Introducing undergraduates for underrepresented minorities to mathematical research: The CSU Channel Islands/California Lutheran University REU, 2004-2006 by C. Wyels The REUT and NREUP programs at California State University, Chico by C. M. Gallagher and T. W. Mattman Undergraduate research at Canisius. Geometry and physics on graphs, summer 2006 by S. Prassidis The NSF REU at Central Michigan University by S. Narayan and K. Smith Claremont Colleges REU, 2005-07 by J. Hoste The first summer undergraduate research program at Clayton State University by A. Lanz Clemson REU in computational number theory and combinatorics by N. Calkin and K. James Research with pre-mathematicians by C. R. Johnson Traditional roots, new beginnings: Transitions in undergraduate research in mathematics at ETSU by A. P. Godbole Undergraduate research in mathematics at Grand Valley State University by S. Schlicker The Hope College REU program by T. Pennings The REU experience at Iowa State University by L. Hogben Lafayette College's REU by G. Gordon LSU REU: Graphs, knots, & Dessins in topology, number theory & geometry by N. W. Stoltzfus, R. V. Perlis, and J. W. Hoffman Mount Holyoke College mathematics summer research institute by M. M. Robinson The director's summer program at the NSA by T. White REU in mathematical biology at Penn State Erie, The Behrend College by J. P. Previte, M. A. Rutter, and S. A. Stevens The Rice University Summer Institute of Statistics (RUSIS) by J. Rojo The Rose-Hulman REU in mathematics by K. Bryan The REU program at DIMACS/Rutgers University by B. J. Latka and F. S. Roberts The SUNY Potsdam-Clarkson University REU program by J. Foisy The Trinity University research experiences for undergraduates in mathematics program by S. Chapman Undergraduate research in mathematics at the University of Akron by J. D. Adler The Duluth undergraduate research program 1977-2006 by J. A. Gallian Promoting undergraduate research in mathematics at the University of Nebraska-Lincoln by J. L. Walker, W. Ledder, R. Rebarber, and G. Woodward REU site: Algorithmic combinatorics on words by F. Blanchet-Sadri Promoting undergraduate research by T. Aktosun Research experiences for undergraduates inverse problems for electrical networks by J. A. Morrow Valparaiso experiences in research for undergraduates in mathematics by R. Gillman and Z. Szaniszlo Wabash Summer Institute in Algebra (WSIA) by M. Axtell, J. D. Phillips, and W. Turner THe SMALL program at Williams College by C. E. Silva and F. Morgan Industrial mathematics and statistics research for undergraduates at WPI by A. C. Heinricher and S. L. Weekes Descriptions of summer enrichment programs: Twelve years of summer program for women in mathematics-What works and why? by M. M. Gupta Research experience for undergraduates in numerical analysis and scientific computing: An international program by G. Fairweather and B. M. Moskal Articles: The Long-Term Undergraduate Research (LURE) model by S. S. Adams, J. A. Davis, N. Eugene, K. Hoke, S. Narayan, and K. Smith Research with students from underrepresented groups by R. Ashley, A. Ayela-Uwangue, F. Cabrera, C. Callesano, and D. A. Narayan Research classes at Gettysburg College by B. Bajnok Research in industrial projects for students: A unique undergraduate experience by S. Beggs What students say about their REU experience by F. Connolly and J. A. Gallian Diversity issues in undergraduate research by R. Cortez, D. Davenport, H
These papers are concerned with new advances and novel solutions in the areas of biofluids, image-guided surgery, tissue engineering and cardovascular mechanics, implant analysis, soft tissue mechanics, bone remodeling and motion analysis. The contents also feature a special section on dental materials, dental adhesives and orthodontic mechanics. This edition contains many examples, tables and figures, and together with the many references, provides the reader with invaluable information on the latest theoretical developments and applications.
This book presents selected peer reviewed papers from the International Conference on Advanced Production and Industrial Engineering (ICAPIE 2019). It covers a wide range of topics and latest research in mechanical systems engineering, materials engineering, micro-machining, renewable energy, industrial and production engineering, and additive manufacturing. Given the range of topics discussed, this book will be useful for students and researchers primarily working in mechanical and industrial engineering, and energy technologies.
Simulation and molding are efficient techniques that can aid the city and regional planners and engineers in optimizing the operation of urban systems such as traffic light control, highway toll automation, consensus building, public safety, and environmental protection. When modeling transportation systems such as freeway systems, arterial or downtown grid systems, the city planner and engineer is concerned with capturing the varied interactions between drivers, automobiles, and the infrastructure. Modeling and simulation are used to effectively optimize the design and operation of all of these urban systems. It is possible that in an urban simulation community workshop, citizens can work interactively in front of computers and be able using the click of the mouse to walk up to their own front porch, looking at the proposed shopping mall alternatives across the street from virtually any angle and proposed bridge or tunnel and see how it can reduce traffic congestion. Buildings can be scaled down or taken out, their orientation can be changed in order to check the view and orientation in order to have better site with efficient energy-conservation. The stone or brick material on a building can be replaced by colored concrete, or more trees and lampposts can be placed on the site. Such flexibility in simulation and animation allows creative ideas in the design and orientation of urban sites to be demonstrated to citizens and decision makers before final realization.
This book integrates concepts from physical acoustics with those from linear viscoelasticity and fractional linear viscoelasticity. Compressional waves and shear waves in applications such as medical ultrasound, elastography, and sediment acoustics often follow power law attenuation and dispersion laws that cannot be described with classical viscous and relaxation models. This is accompanied by temporal power laws rather than the temporal exponential responses of classical models. The book starts by reformulating the classical models of acoustics in terms of standard models from linear elasticity. Then, non-classical loss models that follow power laws and which are expressed via convolution models and fractional derivatives are covered in depth. In addition, parallels are drawn to electromagnetic waves in complex dielectric media. The book also contains historical vignettes and important side notes about the validity of central questions. While addressed primarily to physicists and engineers working in the field of acoustics, this expert monograph will also be of interest to mathematicians, mathematical physicists, and geophysicists.
This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Medical and Veterinary Entomology, Second Edition, has been fully updated and revised to provide the latest information on developments in entomology relating to public health and veterinary importance. Each chapter is structured with the student in mind, organized by the major headings of Taxonomy, Morphology, Life History, Behavior and Ecology, Public Health and Veterinary Importance, and Prevention and Control. This second edition includes separate chapters devoted to each of the taxonomic groups of insects and arachnids of medical or veterinary concern, including spiders, scorpions, mites, and ticks. Internationally recognized editors Mullen and Durden include extensive coverage of both medical and veterinary entomological importance. This book is designed for teaching and research faculty in medical and veterinary schools that provide a course in vector borne diseases and medical entomology; parasitologists, entomologists, and government scientists responsible for oversight and monitoring of insect vector borne diseases; and medical and veterinary school libraries and libraries at institutions with strong programs in entomology. Follows in the tradition of Herm's Medical and Veterinary Entomology The latest information on developments in entomology relating to public health and veterinary importance Two separate indexes for enhanced searchability: Taxonomic and Subject New to this edition: Three new chapters Morphological Adaptations of Parasitic Arthropods Forensic Entomology Molecular Tools in Medical and Veterinary Entomology 1700 word glossary Appendix of Arthropod-Related Viruses of Medical-Veterinary Importance Numerous new full-color images, illustrations and maps throughout
This book can be used in courses on mathematical modeling at the senior undergraduate or graduate level, or used as a reference for in-service scientists and engineers. The book aims to provide an overview of mathematical modeling through a panoramic view of applications of mathematics in science and technology. In each chapter, mathematical models are chosen from the physical, biological, social, economic, management, and engineering sciences. The models deal with different concepts, but have a common mathematical structure and bring out the unifying influence of mathematical modeling in different disciplines. FEATURES: Provides a balance between theory and applications Features models from the physical, biological, social, economic, management, and engineering sciences
This book presents the latest developments in the field of biomedical engineering and includes practical solutions and strictly scientific considerations. The development of new methods of treatment, advanced diagnostics or personalized rehabilitation requires close cooperation of experts from many fields, including, among others, medicine, biotechnology and finally biomedical engineering. The latter, combining many fields of science, such as computer science, materials science, biomechanics, electronics not only enables the development and production of modern medical equipment, but also participates in the development of new directions and methods of treatment. The presented monograph is a collection of scientific papers on the use of engineering methods in medicine. The topics of the work include both practical solutions and strictly scientific considerations expanding knowledge about the functioning of the human body. We believe that the presented works will have an impact on the development of the field of science, which is biomedical engineering, constituting a contribution to the discussion on the directions of development of cooperation between doctors, physiotherapists and engineers. We would also like to thank all the people who contributed to the creation of this monograph—both the authors of all the works and those involved in technical works.
