Hydride vapour phase epitaxy growth, crystal properties and dopant incorporation in gallium nitride

Hydride vapour phase epitaxy growth, crystal properties and dopant incorporation in gallium nitride

Author: Patrick Hofmann

Publisher: BoD – Books on Demand

Published: 2018-08-15

Total Pages: 166

ISBN-13: 3752884924

DOWNLOAD EBOOK

This dissertation employs doping to investigate basic gallium nitride (GaN) crystal properties and to solve challenges of the hydride vapour phase epitaxy (HVPE) growth process. Whereas the first chapter is a short introduction to the history of the GaN single crystal growth, the 2nd chapter introduces to current crystal growth techniques, discusses properties of the GaN material system and the resulting influence on the applicable crystal growth techniques. HVPE, as a vapour phase epitaxy crystal growth method will be explained in greater detail, with focus on the used vertical reactor and its capabilities for doping. The 3rd chapter then focusses on point defects in GaN, specifically on intentionally introduced extrinsic point defects used for doping purposes, i.e. to achieve p-type, n-type or semi-insulating behaviour. Different dopants will be reviewed before the diffusion of point defects in a solid will be discussed. The in-situ introduction of iron, manganese, and carbon during crystal growth is employed in chapter 4 to compensate the unintentional doping (UID) of the GaN crystals, and therefore to achieve truly semi-insulating behaviour of the HVPE GaN. However the focus of this chapter lies on the characterisation of the pyroelectric coefficient (p), as semi-insulating properties are a necessary requirement for the applied Sharp-Garn measurement method. The creation of tensile stress due to in-situ silicon doping during GaN crystal growth is the topic of the 5th chapter. The tensile stress generation effect will be reproduced and the strain inside the crystal will be monitored ex-situ employing Raman spectroscopy. The n-type doping is achieved by using a vapour phase doping line and a process is developed to hinder the tensile strain generation effect. The 6th chapter concentrates on the delivery of the doping precursor via a solid state doping line, a newly developed doping method. Similar to chapter 5, the doping line is characterised carefully before the germanium doping is employed to the GaN growth. The focus lies on the homogeneity of the germanium doping and it is compared compared to the silicon doping and the vapour phase doping line. Benefits and drawbacks are discussed in conjunction with the obtained results. The germanium doping via solid state doping line is applied to the HVPE GaN growth process to measure accurately growth process related properties unique to the applied set of GaN growth parameters.


Nanomaterials Handbook

Nanomaterials Handbook

Author: Yury Gogotsi

Publisher: CRC Press

Published: 2006-01-26

Total Pages: 801

ISBN-13: 1420004018

DOWNLOAD EBOOK

Even before it was identified as a science and given a name, nanotechnology was the province of the most innovative inventors. In medieval times, craftsmen, ingeniously employing nanometer-sized gold particles, created the enchanting red hues found in the gold ruby glass of cathedral windows. Today, nanomaterials are being just as creatively used to improve old products, as well as usher in new ones. From tires to CRTs to sunscreens, nanomaterials are becoming a part of every industry. The Nanomaterials Handbook provides a comprehensive overview of the current state of nanomaterials. Employing terminology familiar to materials scientists and engineers, it provides an introduction that delves into the unique nature of nanomaterials. Looking at the quantum effects that come into play and other characteristics realized at the nano level, it explains how the properties displayed by nanomaterials can differ from those displayed by single crystals and conventional microstructured, monolithic, or composite materials. The introduction is followed by an in-depth investigation of carbon-based nanomaterials, which are as important to nanotechnology as silicon is to electronics. However, it goes beyond the usual discussion of nanotubes and nanofibers to consider graphite whiskers, cones and polyhedral crystals, and nanocrystalline diamonds. It also provides significant new information with regard to nanostructured semiconductors, ceramics, metals, biomaterials, and polymers, as well as nanotechnology’s application in drug delivery systems, bioimplants, and field-emission displays. The Nanomaterials Handbook is edited by world-renowned nanomaterials scientist Yury Gogotsi, who has recruited his fellow-pioneers from academia, national laboratories, and industry, to provide coverage of the latest material developments in America, Asia, Europe, and Australia.


Nanotubes and Nanofibers

Nanotubes and Nanofibers

Author: Yury Gogotsi

Publisher: CRC Press

Published: 2006-06-20

Total Pages: 265

ISBN-13: 1420009389

DOWNLOAD EBOOK

Size, Shape, and Synthesis Key toTuning Properties The discovery and rapid evolution of carbon nanotubes have led to a vastly improved understanding of nanotechnology, as well as dozens of possible applications for nanomaterials of different shapes and sizes ranging from composites to biology, medicine, energy, transportation, a


Functional Materials and Devices

Functional Materials and Devices

Author: A. K. Arof

Publisher:

Published: 2006

Total Pages: 320

ISBN-13:

DOWNLOAD EBOOK

The last five decades have seen an explosion of interest in exploring the possibilities of new materials for industrial and commercial applications. Materials Technology is now recognized as being one of the most important factors driving the development and growth of a nation's economy. The sciences of design, processing, manufacturing and materials utilization are crucial elements contributing to the growth of new industries. The need for new discoveries in Materials Science has encouraged scientists from around the world to meet regularly and to discuss the latest advances and innovations.


Carbon Nanomaterials

Carbon Nanomaterials

Author: Yury Gogotsi

Publisher: CRC Press

Published: 2006-06-20

Total Pages: 345

ISBN-13: 1420009370

DOWNLOAD EBOOK

First Self-Contained Source Entirely Dedicated to Nanocarbons Carbon nanotubes (CNTs) attract a good deal of attention for their electronic, mechanical, optical, and chemical characteristics. But nanostructured carbons are not limited to nanotubes and fullerenes-they also exist as nano-diamonds, fibers, cones, scrolls, whiskers, and grap


Science and Application of Nanotubes

Science and Application of Nanotubes

Author: D. Tománek

Publisher: Springer Science & Business Media

Published: 2005-12-17

Total Pages: 393

ISBN-13: 0306470985

DOWNLOAD EBOOK

This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.


Soft Actuators

Soft Actuators

Author: Kinji Asaka

Publisher: Springer Nature

Published: 2019-08-28

Total Pages: 722

ISBN-13: 9811368503

DOWNLOAD EBOOK

This book is the second edition of Soft Actuators, originally published in 2014, with 12 chapters added to the first edition. The subject of this new edition is current comprehensive research and development of soft actuators, covering interdisciplinary study of materials science, mechanics, electronics, robotics, and bioscience. The book includes contemporary research of actuators based on biomaterials for their potential in future artificial muscle technology. Readers will find detailed and useful information about materials, methods of synthesis, fabrication, and measurements to study soft actuators. Additionally, the topics of materials, modeling, and applications not only promote the further research and development of soft actuators, but bring benefits for utilization and industrialization. This volume makes generous use of color figures, diagrams, and photographs that provide easy-to-understand descriptions of the mechanisms, apparatus, and motions of soft actuators. Also, in this second edition the chapters on modeling, materials design, and device design have been given a wider scope and made easier to comprehend, which will be helpful in practical applications of soft actuators. Readers of this work can acquire the newest technology and information about basic science and practical applications of flexible, lightweight, and noiseless soft actuators, which differ from conventional mechanical engines and electric motors. This new edition of Soft Actuators will inspire readers with fresh ideas and encourage their research and development, thus opening up a new field of applications for the utilization and industrialization of soft actuators.


Sustainable Nanotechnology

Sustainable Nanotechnology

Author: Zibiao Li

Publisher: Royal Society of Chemistry

Published: 2022-06-17

Total Pages: 325

ISBN-13: 1839162554

DOWNLOAD EBOOK

This book illustrates how green nanotechnology is being used to promote sustainability, including applications in environmental remediation and energy optimization.


Microfabrication and Nanomanufacturing

Microfabrication and Nanomanufacturing

Author: Mark J. Jackson

Publisher: CRC Press

Published: 2005-11-10

Total Pages: 416

ISBN-13: 1420028278

DOWNLOAD EBOOK

Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.