This book presents the selected papers presented at the Third International Congress of Applied Chemistry & Environment (ICACE–3) that took place on May 27-29, 2022. The topics of the conference covers topics from the thematic sections: (1) Environment and Climate Change; (2) Green Chemistry and Natural Substances; (3) Biobased Materials and Nanomaterials; (4) Sustainable Textiles and Clean Processes. For this edition of the conference, it is devoted to present the advantage to use annual plants and/or lignocellulose material as sources for production of fibers and/or cellulose derivatives and/or nanocellulose material with focus on their processing, properties and applications. This book benefits lecturers, students, researchers and industrialists who are working in the field of natural fiber especially in order to preserve the forest resource and to satisfy the increasing demand in pulps.
On October 14-19, 1990, the 6th International Conference on the Conservation of Earthen Architecture was held in Las Cruces, New Mexico. Sponsored by the GCI, the Museum of New Mexico State Monuments, ICCROM, CRATerre-EAG, and the National Park Service, under the aegis of US/ICOMOS, the event was organized to promote the exchange of ideas, techniques, and research findings on the conservation of earthen architecture. Presentations at the conference covered a diversity of subjects, including the historic traditions of earthen architecture, conservation and restoration, site preservation, studies in consolidation and seismic mitigation, and examinations of moisture problems, clay chemistry, and microstructures. In discussions that focused on the future, the application of modern technologies and materials to site conservation was urged, as was using scientific knowledge of existing structures in the creation of new, low-cost, earthen architecture housing.
This booklet is designed to bridge the gap between handbooks and technical literature and aims at graduate students or experienced readers. Commercial flow sheeting simulation software is increasingly available and is used in the early steps of process design in industry. As to this, more sophisticated and precise models based on activities instead of concentrations should be used. After an introductory chapter there is in Chapter 2 an intensive discussion of reactive phase equilibria of ionic and non-ionic solutes based on chemical potentials. Chapter 3 introduces to multicomponent diffusion and mass transfer. However, the main focus is on the reactive mass transfer on rigid and mobile surfaces where the interfacial reaction, molecular diffusion and adsorption layers are decisive. The respective extraction of zinc with a cation exchanger and of acetic acid with an anion exchanger is discussed as case studies. Since adsorption layers and surfactants have a major impact on liquid-liquid extraction efficiency, the final chapter reviews several tech niques which make use of polymeric species in an extractive process. A short review is also given on extraction apparatus and the hydrodynamics (hydraulic design, droplet populance balances) of columns. Much of the booklet is based on the PhD works of C. Czapla (2000), G. Modes (2000), H. Klocker (1996), T. Kronberger (1995), M. Marters (2000), M. Roos (2000), M. Traving (2000) and B. Wachter (1996) who I wish to thank for their fruitful contributions.
"Apollo 14, the third mission during which men have worked on the surface of the Moon, was highly successful. This mission to the Fra Mauro Formation provided geophysical data from a new set of instruments... Because of improved equipment, such as the modularized equipment transporter, and because of the extended time spent on the lunar surface, a large quantity and variety of lunar samples were returned to Earth for detailed examination. New information concerning the mechanics of the lunar soil was also obtained during this mission. In addition, five lunar-orbital experiments were conducted during the Apollo 14 mission, needing no new equipment other than a camera. The experiments were executed by the command module pilot in the command and service module while the commander and the lunar module pilot were on the surface of the Moon. This report is preliminary in nature; however, it is meant to acquaint the reader with the actual conduct of the Apollo 14 scientific mission and to record the facts as they appear in the early stages of the scientific mission evaluation. As far as possible, data trends are reported, and preliminary results and conclusions are included."--p. xi.
Even in the 21st Century, the manufacture of leather retains an air of the dark arts, still somewhat shrouded in the mysteries of a millennia old, craft based industry. Despite the best efforts of a few scientists over the last century or so, much of the understanding of the principles of tanning is still based on received wisdom and experience. Leather is made from (usually) the hides and skins of animals - large animals such as cattle have hides, small animals such as sheep have skins. The skin of any animal is largely composed of the protein collagen, so it is the chemistry of this fibrous protein and the properties it confers to the skin with which the tanner is most concerned. In addition, other components of the skin impact on processing, impact on the chemistry of the material and impact on the properties of the product, leather. Therefore, it is useful to understand the relationships between skin structure at the molecular and macro levels, the changes imposed by modifying the chemistry of the material and the eventual properties of the leather. This book aims to contribute to changing the thinking in the industry, to continue building a body of scientific understanding, aimed at enhancing the sustainability of an industry which produces a unique group of materials, derived from a natural source. The Science of Leather is the only current text on tanning science, and addresses the scientific principles which underpin the processes involved in making leather. It is concerned with the chemical modification of collagen, prior to tanning and the tanning reactions in particular. The subject is covered in the following order: collagen chemistry, collagen structure, skin structure, processing to prepare for tanning, the tanning processes and processing after tanning. The aim of the book is to provide leather scientists and technologists with an understanding of how the reactions work, the nature of their outcomes and how the processes can be controlled and changed. The objective is to synthesise a scientific view of leather making and to arrive at an understanding of the nature of tanning - how the wide range of chemistries employed in the art can change the properties of collagen, making leather with different properties, especially conferring different degrees of stabilisation as measured by the hydrothermal stability. Environmental issues are not treated as a separate theme - the impact of leather making on the environment is a thread running through the text, with the assumption that better understanding of the science of leather making will lead to improved processing. The book also reflects on the ways leather technology may develop in the future based on the foundation of understanding the scientific principles which can be exploited. It also includes a subject index, references and a glossary. The book provides the reader with insights into the role science plays in leather technology and provides fundamental understanding, which should be the basis for scientific and technological research and development for the benefit of the global leather industry. The book is aimed at students, leather scientists and technologists, in both academia and industry, in leather production and in chemical supply houses.
This first of three volumes starts with a short introduction to historical metrology as a scientific discipline and goes on with an anthology of acient and modern measurement systems of all kind, scientific measures, units of time, weights, currencies etc. It concludes with an exhaustive list of references. Units of measurement are of vital importance in every civilization through history. Since the early ages, man has through necessity devised various measures to assist him in everyday life. They have enabled and continue to enable us to trade in commonly and equitably understood amounts, and to investigate, understand, and control the chemical, physical, and biological processes of the natural world. The essence of the work is an alphabetically ordered, comprehensive list of measurement nomenclature, units and scales. It provides an understanding of almost all quantitative expressions observed in all imaginable situations, including spelling variants and the abbreviations and symbols for units, and various acronyms used in metrology. It will be of use not only to historians of science and technology, but also to economic and social historians and should be in every major academic and national library as standard reference work on the topic.
