Author:

Publisher:

Published: 1950

Total Pages: 3

ISBN-13:

Iron and steel are used extensively in building; structural steelwork, railings, gutters, pipes, radiators and other components. It all has to be painted, not just for decoration. but to stop rusting. How successful the paint will be in preventing rust depends to a great extent on the condition of the surface of the metal at the time of painting, and on the type of priming paint used. If the surface is coated with oil, grease or dirt, the paint will not adhere properly. Any moisture trapped beneath the paint is likely to cause rusting, and if traces of rust are painted over they will continue to spread, eating the metal away and pushing the paint off. So before you paint iron or steel, make sure that its surface is quite dry, and free from all dirt, grease and rust. Other metals do not corrode so readily as iron or steel when exposed to the weather - in fact, zinc, copper and lead when used in sheet form for roofing are seldom painted. Aluminium is now used extensively for building work, and if the atmosphere is likely to cause corrosion, as in industrial areas or near the sea, painting is advisable. It is usually more difficult to get paint to adhere to non-ferrous metals than it is to iron and steel. Their highly polished surfaces may be one of the causes. If the metal has been exposed to the weather for a few months, no further preparation for painting is needed. If not, it may be necessary either to roughen the surface with abrasive paper, or to use a proprietary solution containing phosphoric acid. Choose your primer carefully. To stop iron and steel rusting, use a red lead primer, or a zinc chromate red oxide primer containing a high proportion of zinc chromate. As a general rule, priming paints for non-ferrous metals should not contain lead or graphite pigments. Caustic paint removers must not be used for removing old paint from aluminium or zinc.