The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.
It has become a tradition that every four years, the Université Catholique de Louvain and the Katholieke Universiteit Leuven jointly organize a symposium devoted to the scientific bases for the preparation of heterogeneous catalysts. These meetings bring together researchers from academia and industry and offer a forum for discussions on the chemistry involved in the preparation of industrial heterogeneous catalysts. This volume containing the Proceedings of the 8th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts consists of papers summarizing most of the 139 oral communications and posters selected by the international scientific committee, composed of 27 experts in the field of catalyst preparation, holding an industrial or academia appointment.The contributions focus on the aspects of catalyst preparation. The main topics are: new approaches in catalyst preparation; advanced preparations of nanoporous and mesoporous catalysts; catalysts preparation for special performances and purposes; catalysts for environmental purposes; and molecular catalysis. Emphasis is put on the role that catalysis can play as an essential element of sustainable development.
This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.
This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.
Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications
(Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.
Since 1987, the Petroleum Division of the American Chemical Society (ACS) has sponsored at 3 year intervals an international symposium on fluid cracking catalysts (FCC) technology. This volume collects the recent progress of this technology as reported in the papers presented during the 232th National Meeting of the ACS in San Francisco, September 10-14, 2006.Sixty-six years after the introduction of the fluid cracking catalyst process, it remains the main process of gasoline generation for the estimated 237 millions cars on US roads. Catalysts testing and evaluation still remains a subject of interest, debate and controversy. Lambda sweep testing, testing of SOx, NOx and combustion promoters have been discussed in details together with catalyst evaluation for atmospheric residues and metal contaminated oils cracking.Of particular interest has been the introduction of novel concept in process design aimed at improving cracked product selectivity such as two-stage risers for better gasoline and olefins production and downer technology for high severity processes . The importance of solid state nuclear magnetic resonance (NMR) in the study of crude oils, catalysts and reaction products are illustrated by several examples. Two contributions describe the use of predictive methods to understand FCC aging and deactivationand personal overviews of the development of SOx and combustion promoters technology are presented.* Presents findings from the tri-annual international symposium on fluid cracking catalysts (FCC) technology, sponsored by the Petroleum Division of the American Chemical Society (ACS) * Two contributions describe the use of predictive methods to understand FCC aging and deactivation* Personal overviews by the authors of the development of SOx and combustion promoters technology
Nanoporous Materials III contains the invited lectures and peer-reviewed oral and poster contributions to be presented at the 3rd Conference on Nanoporous Materials, which will be hosted in Ottawa, Canada, June 2002. The work covers complementary approaches to and recent advances in the field of nanostructured materials with pore sizes larger than 1nm, such as periodic mesoporous molecular sieves M41S and FSM16 and related materials including clays, carbon molecular sieves, colloidal crystal templated organic and inorganic materials, porous polymers and sol gels. The broad range of topics covered in relation to the synthesis and characterization of ordered mesoporous materials are of great importance for advanced adsorption, catalytic and separation processes as well as the development of nanotechnology. The contents of this title are based on topics to be discussed by invited lecturers, which deal with periodic mesoporous organosilicas, stability and catalytic activity of aluminosilicate mesostructures, electron microscopy studies of ordered materials, imprinted polymers and highly porous metal-organic frameworks. The other contributions deal with tailoring the surface and structural properties of nanoporous materials, giving a detailed characterization as well as demonstrating their usefulness for advanced adsorption and catalytic applications.
