Plastics Additives and Testing
Plastics Additives and Testing

Author: Muralisrinivasan Natamai Subramanian

Publisher: John Wiley & Sons

Published: 2013-04-12

Total Pages: 236

ISBN-13: 1118710592

DOWNLOAD EBOOK

“Plastics Additives and Testing” is a practical book for engineers and operators and discusses both inorganic and organic chemicals that are widely used as additives in plastics processing operations. It is common practice today to use analytical techniques to improve plastics processing. Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. This book serves to implement this balance in the manufacturing line. Written by a successful, international consultant with an excellent publishing track record, it combines plastics additives, testing and quality control and is a valuable and critical book for engineers and operators to have when performing their tasks.

Plastics Additives and Testing
Plastics Additives and Testing

Author: Muralisrinivasan Natamai Subramanian

Publisher: John Wiley & Sons

Published: 2013-04-18

Total Pages: 260

ISBN-13: 111871055X

DOWNLOAD EBOOK

“Plastics Additives and Testing” is a practical book for engineers and operators and discusses both inorganic and organic chemicals that are widely used as additives in plastics processing operations. It is common practice today to use analytical techniques to improve plastics processing. Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. This book serves to implement this balance in the manufacturing line. Written by a successful, international consultant with an excellent publishing track record, it combines plastics additives, testing and quality control and is a valuable and critical book for engineers and operators to have when performing their tasks.

Plastics Additives
Plastics Additives

Author: G. Pritchard

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 650

ISBN-13: 9401158622

DOWNLOAD EBOOK

Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

Plastics Additives
Plastics Additives

Author: J.C.J. Bart

Publisher: IOS Press

Published: 2006-03-15

Total Pages: 824

ISBN-13: 1607501228

DOWNLOAD EBOOK

"Cover-to-cover reading of Plastics Additives, Advanced Industrial Analysis, is recommended for both professional analysts and plastics technologists. Professor Bart’s prose style is easy to read. A professional background in analytical chemistry is not assumed. Particularly valuable is the trove of good advice as to which approach might be best in a given situation. Every department with a serious interest in additive / property relations should invest in a copy.” -- PMAD Newsletter. This industrially relevant and up-to-date resource deals with all established and emerging analytical methods for in-polymer additive analysis of plastics formulations. Quality assurance and industrial troubleshooting all benefit from direct analysis modes. Plastics Additives comprises detailed coverage of solid-state spectroscopy, thermal analysis and pyrolysis, laser techniques, surface studies and microanalysis along with process analytics, quantitative analysis and modern method development and validation applied to additives in polymers. The book is organised for quick and easy reference and is extensively illustrated with over 200 figures, 300 flow diagrams and tables to facilitate rapid understanding of this topic, and it contains 4000 references. Emphasis is on understanding (principles and characteristics) and industrial applicability.

Handbook for the Chemical Analysis of Plastic and Polymer Additives
Handbook for the Chemical Analysis of Plastic and Polymer Additives

Author: Michael Bolgar

Publisher: CRC Press

Published: 2015-09-25

Total Pages: 626

ISBN-13: 1439860750

DOWNLOAD EBOOK

Polymers have undoubtedly changed the world through many products that improve our lives. However, additives used to modify the overall characteristics of these materials may not be fully disclosed or understood. These additives may present possible environmental and health hazards. It is important to monitor consumer products for these compounds u

Additive Migration from Plastics Into Food
Additive Migration from Plastics Into Food

Author: T. R. Crompton

Publisher: Elsevier

Published: 2013-10-22

Total Pages: 247

ISBN-13: 1483157717

DOWNLOAD EBOOK

Additive Migration from Plastics Into Food examines the intrusion of foreign chemicals into food via additives present in plastics packaging and the toxic hazards they pose to consumers. This book shows how direct contact between the packed commodity and the plastic is likely to result in the transfer of polymer additives, adventitious impurities such as monomers, catalyst remnants, and residual polymerization solvents, and low-molecular-weight polymer fractions from the plastic into the packaged material. This book is comprised of nine chapters and begins with a discussion on the various types of plastics used in food packaging as well as the types of substances present in the plastic that might migrate into the food. Subsequent chapters review world literature on extraction testing and the analysis of extractants. The determination of various types of polymer additives and residual monomers in extractants of liquid foodstuffs and beverages, solid foods, edible oils, and fatty foodstuffs is considered. The final chapter looks at the legal requirements concerning the use of additives in food-grade plastics in various countries. This monograph will be of interest to those in the plastics industry, food and beverage packaging industry, and large retail outlets such as supermarkets, along with medical and public health officials, legislators, environmentalists, and the general public.

Spectra for the Identification of Additives in Food Packaging
Spectra for the Identification of Additives in Food Packaging

Author: Ben van Lierop

Publisher: Springer Science & Business Media

Published: 1998-02-28

Total Pages: 538

ISBN-13: 9780792349860

DOWNLOAD EBOOK

This new book on additives used in plastics for food contact, can be seen as a companion to the 1993 publication Spectra for the Identification of Monomers in Food Packaging [1, 2]. That earlier book presented information on monomeric substances listed in Directive 901128/EEC [3], which restricts the range of monomers and other starting substances that can be used for the production of plastics materials and articles intended for food contact applications. As a logical supplement to the collection of monomers and other starting substances, the preparation of a reference collection and a Handbook of analytical data of additives was undertaken with funding from The European Commission under the Standards Measurements and Testing programme. We then give a collection of spectra for the identification of 100 of the most important additives used in plastics packaging and coatings. Infra-red (FT-IR) and mass spectra (MS) are presented, as in the monomers book, but we have extended the scope to include proton nuclear magnetic resonance eH-NMR) spectra and gas-chromatographic (GC) data. Legal Framework The Commission of the European Communities provides in Synoptic Document N. 7 [4] a provisional list of additives used for the production of food contact plastics. This Synoptic Document anticipates a Directive on additives for food contact plastics. One hundred of the most important additives were selected from this provisional list after extensive consultation with researchers in the field and with representatives from European industry (Food Contact Additives Panel (FCA) sector group of the European Chemical Industry Council (CEFIC).

Handbook of Polymer Synthesis, Characterization, and Processing
Handbook of Polymer Synthesis, Characterization, and Processing

Author: Enrique Saldivar-Guerra

Publisher: John Wiley & Sons

Published: 2013-02-28

Total Pages: 660

ISBN-13: 1118480775

DOWNLOAD EBOOK

Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.