Particles in Gases and Liquids 2
Particles in Gases and Liquids 2

Author: K.L. Mittal

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 393

ISBN-13: 1489935444

DOWNLOAD EBOOK

This book chronicles the proceedings of the Second Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 20th Annual Fine Particle Society meeting in Boston, August 21-25, 1989. As this second symposium was as successful as the prior one, so we have decided to hold symposia on this topic on a regular (biennial) basis and the third symposium in this series is scheduled to be held at the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. l As pointed out in the Preface to the prior volume in this series that recently there has been tremendous concern about yield losses due to unwanted particles, and these unwelcome particles can originate from a legion of sources, including process gases and liquids. Also all signals indicate that in the future manufacture of sophisticated and sensitive microelectronic components (with shrinking dimensions) and other precision parts, the need for detection, characterization, analysis and control of smaller and smaller particles will be more intensified.

Particles in Gases and Liquids 1
Particles in Gases and Liquids 1

Author: K.L. Mittal

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 298

ISBN-13: 1461307937

DOWNLOAD EBOOK

This book documents the proceedings of the Symposium on Particles in Fluids: Detection, Characterization and Control held as a part of the 18th Fine Particle Society meeting in Boston, August 3-7, 1987. This was the Premier symposium on this topic and the response was so good that we have decided to organize it on a biennial basis and the second symposium will be held under the rubric Particles in Gases and Liquids: Detection, Characterization and Control at the 20th Fine Particle Society meeting in Boston, August 22-26, 1989. In the modern manufacture of sophisticated and sensitive microelectronic components and other precision parts, there has been a great deal of concern about yield losses due to micrometer- and submicrometer-sized particles. These particles can originate from a number of sources including fluids, i. e. , gases and liquids used in the manufacturing process. So the detection, characterization and control or removal of these undesirable particles is of cardinal importance and this symposium was conceived and o~ganized with this in mind. The purposes of this symposium were to bring together those actively involved in all aspects of particles in fluids, to provide a forum for discussion of the latest techniques for the detection, characterization and control of particles, and to highlight areas which needed intensified R&D efforts. The printed program contained a total of 46 papers and a variety of topics dealing with various ramifications of particles in fluids were presented.

Particles in Gases and Liquids 3
Particles in Gases and Liquids 3

Author: K.L. Mittal

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 289

ISBN-13: 1489911871

DOWNLOAD EBOOK

This book documents the proceedings of the Third Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. This series of symposia was initiated in 1987 in light of the growing importance to eliminate particles from process gases and liquids. As pointed out in the Preface to antecedent volumes in this series that particles in process gases and liquids could cause significant yield losses in precision manufacturing and concomitantly there has been heightened interest in understanding the behavior of particles in gases and liquids and devising ways to eliminate, or at least reduce substantially, these particles. The concern about particles in gases and liquids has been there for qui.te some time in the microelectronics arena, but there are other areas also where particles are of significant concern, e.g. in operation theatres in hospitals, food and beverage industry, and pharmaceutical manufacturing. This symposium basically had the same objectives as its predecessors, but to provide an update on the R&D activity taking place in the arena of particle detection, characterization and control. The printed program comprised a total of 28 papers dealing with variegated aspects of particles in gases and liquids. There were brisk and lively discussions and the attendees offered many positive comments, which goes to show that it was a well-received and needed symposium.

First International Congress on Adhesion Science and Technology---invited papers
First International Congress on Adhesion Science and Technology---invited papers

Author: W.J. van Ooij

Publisher: CRC Press

Published: 2023-03-08

Total Pages: 966

ISBN-13: 146656279X

DOWNLOAD EBOOK

This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven part

First International Congress on Adhesion Science And Technology---invited Papers
First International Congress on Adhesion Science And Technology---invited Papers

Author: W. J. Van Ooij

Publisher: VSP

Published: 1998-12

Total Pages: 970

ISBN-13: 9789067642910

DOWNLOAD EBOOK

This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven parts: Part 1: Fundamental aspects of adhesion and general topics; Part 2: Contact angle, wettability and surface energetics; Part 3: Surface modification: Relevance to adhesion; Part 4: Adhesives and adhesive joints; Part 5: Adhesion aspects of polymeric coatings, and polymer-polymer interphase; Part 6: Metal-polymer and metal-ceramic adhesion; and Part 7: General papers. The topics covered include many different aspects of adhesion science and technology, and both fundamental and applied issues are addressed. The final section of this volume gives a listing of titles, authors and affiliations of the other 185 papers which were included in the technical program of the conference.

Particles on Surfaces 3
Particles on Surfaces 3

Author: K.L. Mittal

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 319

ISBN-13: 1489923675

DOWNLOAD EBOOK

This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.

Surfactant Science and Technology
Surfactant Science and Technology

Author: Laurence S. Romsted

Publisher: CRC Press

Published: 2014-05-05

Total Pages: 598

ISBN-13: 1439882959

DOWNLOAD EBOOK

Surfactant research explores the forces responsible for surfactant assembly and the critical industrial, medical, and personal applications, including viscosity control, microelectronics, drug stabilization, drug delivery, cosmetics, enhanced oil recovery, and foods. Surfactant Science and Technology: Retrospects and Prospects, "a Festschrift in honor of Dr. Kash Mittal," provides a broad perspective with chapters contributed by leaders in the fields of surfactant-based physical, organic, and materials chemistries. Many of the authors participated in a special symposium in Melbourne, Australia, honoring Kash Mittal’s 100th edited book at the 18th Surfactants in Solution (SIS) meeting. Each chapter provides an overview of a specific research area, with discussions on past, present, and future directions. The book is divided into six parts. Part I reviews the evolution of theoretical models for surfactant self-assembly, and introduces a model for interpreting ion-specific effects on aggregate properties. Part II focuses on interactions of surfactant solutions with solid supports; uses contact angles to understand hydrophobic/hydrophilic changes in a lipid layer; uses surface tension to understand molecular arrangements at interfaces; reviews spreading phenomena; discusses pattern formation on solid surfaces; and applies tensiometry to probe flavor components of espresso. Part III discusses novel DNA-based materials, multifunctional poly(amino acid)s–based graft polymers for drug delivery, and polymeric surfactants for stabilizing suspensions and emulsions. Part IV introduces farm-based biosurfactants from natural products and "greener" biosurfactants from bacteria. Part V explores lyotropic liquid crystals and their applications in triggered drug release; microemulsion properties and controlled drug release; the role of hydrotopes in formulations and in enhancing solubilization in liquid crystals; the potential of ionic liquids to generate tunable and selective reaction media; and provides an overview of stimuli-responsive surfactants. Focusing on emulsions, Part VI reviews the design of emulsion properties for various commercial applications, the role of surfactants in the oil and gas industries, and surfactant mechanisms for soil removal via microemulsions and emulsification.

Metallized Plastics 3
Metallized Plastics 3

Author: K.L. Mittal

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 391

ISBN-13: 146153416X

DOWNLOAD EBOOK

This volume chronicles the proceedings of the Third Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the auspices of the Dielectric Science and Technology Division of the Electrochemical Society in Phoenix, Arizona, October 13-18, 1991. This series of symposia to address the subject of metallized plastics was initiated in 1988 and the premier symposium was held in Chicago, October 10-12, 1988, followed by the second event in Montreal, Canada, May 7-10, 1990. The rroceedings of these two symposia have been properly documented ,2. The third symposium was a huge success like the previous two events, and all this is testimonial to the brisk interest and high tempo of R&D activity in the fie14 of metallized plastics. This further bolsters our earlier thinking that there was a conspicuous need to hold symposia on this topic on a regular basis and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. The study of metallized plastics constitutes an important human endeavor l and as pointed out earlier there are myriad applications of metallized plastics ranging from very commonplace to exotic. Also a survey of the recent literature will reveal that both the fundamental and applied aspects of metallized plastics are being pursued with great vigor.

Surfactants in Precision Cleaning
Surfactants in Precision Cleaning

Author: Rajiv Kohli

Publisher: Elsevier

Published: 2021-10-21

Total Pages: 336

ISBN-13: 0128222174

DOWNLOAD EBOOK

Surfactants in Precision Cleaning: Removal of Contaminants at the Micro and Nanoscale is a single source of information on surfactants, emulsions, microemulsions and detergents for removal of surface contaminants at the micro and nanoscale. The topics covered include cleaning mechanisms, effect of surfactants, types of stable dispersions (emulsions, microemulsions, surfactants, detergents, etc.), cleaning technology, and cleaning applications. Users will find this volume an excellent resource on the use of stable dispersions in precision cleaning. - Single source of current information on surfactants, emulsions, microemulsions and detergents for precision cleaning applications - Includes a list of extensive reference sources - Discusses specific selection and properties of surfactants and their use in cleaning - Provides a guide for cleaning applications in different industry sectors

Particles on Surfaces 2
Particles on Surfaces 2

Author: K.L. Mittal

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 320

ISBN-13: 1461305314

DOWNLOAD EBOOK

This volume documents the proceedings of the Second Symposium on Particles on Surfaces: Detection, Adhesion and Removal held as part of the 19th Annual Meeting of the Fine Particle Society in Santa Clara, California, July 20-25, 1988. The premier symposium on this topic was l organized in 1986 and has been properly chronicled . Based on the success of these two events and the high interest evinced by the technical community, we plan to regularly hold symposia on this topic on a biennial basis and the next one is slated for August 20-24, 1990 in San Diego, California. l As pointed out in the Preface to the first volume , the topic of particles on surfaces is of paramount importance in legion of technological areas. Particularly in the semiconductor device fabrication area, all signals indicate that the understanding of the behavior of particles on surfaces and their removal will attain heightened importance in the times to come. As the device dimensions are shrinking at an accelerated pace, so the benign particles of today will become the killer defects in the not too distant future. The tempo of research and development activity in the field of particles on surfaces is very high, and better and novel ways are continuously being devised to remove smaller and smaller particles.