Read and Download eBook Full
Author: Wai-Fah Chen
Publisher: J. Ross Publishing
Published: 2007
Total Pages: 500
ISBN-13: 9781932159745
DOWNLOAD EBOOKJ. Ross Publishing Classics are world-renowned texts and monographs written bt preeminent scholars. These books are available to students, researchers, professionals, and libararies.
Author: Ermakova A.V.
Publisher: Издательство АСВ
Published: 2012
Total Pages: 114
ISBN-13: 5930938792
DOWNLOAD EBOOKThe work presents the theoretical basis of Additional Finite Element Method (AFEM), which is a variant of the Finite Element Method (FEM) for analysis of reinforced concrete structures at limit state. AFEM adds to the traditional sequence of problem by FEM the units of the two well-known methods of the structural design: method of additional loads and limit state method. The problem is solved by introduction of ideal failure models and additional design diagrams formed from additional finite elements, where each AFE describes the limit state reached by the main element. The main relations defining the properties of AFEs as well as the examples of the use of Additional Finite Element Method for analysis of reinforced concrete structures at limit state are given in the work too.
Author: fib - federation internationale du beton
Publisher: John Wiley & Sons
Published: 2013-12-04
Total Pages: 434
ISBN-13: 3433030618
DOWNLOAD EBOOKThe International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.
Author: René de Borst
Publisher: John Wiley & Sons
Published: 2012-07-25
Total Pages: 481
ISBN-13: 1118376013
DOWNLOAD EBOOKBuilt upon the two original books by Mike Crisfield and their own lecture notes, renowned scientist René de Borst and his team offer a thoroughly updated yet condensed edition that retains and builds upon the excellent reputation and appeal amongst students and engineers alike for which Crisfield's first edition is acclaimed. Together with numerous additions and updates, the new authors have retained the core content of the original publication, while bringing an improved focus on new developments and ideas. This edition offers the latest insights in non-linear finite element technology, including non-linear solution strategies, computational plasticity, damage mechanics, time-dependent effects, hyperelasticity and large-strain elasto-plasticity. The authors' integrated and consistent style and unrivalled engineering approach assures this book's unique position within the computational mechanics literature. Key features: Combines the two previous volumes into one heavily revised text with obsolete material removed, an improved layout and updated references and notations Extensive new material on more recent developments in computational mechanics Easily readable, engineering oriented, with no more details in the main text than necessary to understand the concepts. Pseudo-code throughout makes the link between theory and algorithms, and the actual implementation. Accompanied by a website (www.wiley.com/go/deborst) with a Python code, based on the pseudo-code within the book and suitable for solving small-size problems. Non-linear Finite Element Analysis of Solids and Structures, 2nd Edition is an essential reference for practising engineers and researchers that can also be used as a text for undergraduate and graduate students within computational mechanics.
Author: Comité euro-international du béton
Publisher: Thomas Telford
Published: 1996
Total Pages: 214
ISBN-13: 9780727720863
DOWNLOAD EBOOKThis text provides a review of relevant knowledge in the area of constitutive modelling of concrete steel bonds and their interaction. It discusses the problems encountered in assembling the various elements with the purpose of constructing the model of an element made of reinforced concrete. Whether physically or empirically based, very simple or sophisticated, long-established or brand new, the models presented in this book are produced in as rational a framework as possible, and are accompanied by comments on their advantages and limitations.
Author: Jeremy Isenberg
Publisher:
Published: 1993
Total Pages: 734
ISBN-13:
DOWNLOAD EBOOKThis collection contains 10 papers discussing finite element analysis of reinforced concrete structures presented at an international workshop held in New York, New York, June 2-5, 1991.
Author: M Y H Bangash
Publisher: Thomas Telford
Published: 2001-07-27
Total Pages: 940
ISBN-13: 9780727729460
DOWNLOAD EBOOKManual of numerical methods in concrete aims to present a unified approach for the available mathematical models of concrete, linking them to finite element analysis and to computer programs in which special provisions are made for concrete plasticity, cracking and crushing with and without concrete aggregate interlocking. Creep, temperature, and shrinkage formulations are included and geared to various concrete constitutive models.
Author: Thomas T. C. Hsu
Publisher: John Wiley & Sons
Published: 2010-03-16
Total Pages: 518
ISBN-13: 9780470688885
DOWNLOAD EBOOKUnified Theory of Concrete Structures develops an integrated theory that encompasses the various stress states experienced by both RC & PC structures under the various loading conditions of bending, axial load, shear and torsion. Upon synthesis, the new rational theories replace the many empirical formulas currently in use for shear, torsion and membrane stress. The unified theory is divided into six model components: a) the struts-and-ties model, b) the equilibrium (plasticity) truss model, c) the Bernoulli compatibility truss model, d) the Mohr compatibility truss model, e) the softened truss model, and f) the softened membrane model. Hsu presents the six models as rational tools for the solution of the four basic types of stress, focusing on the significance of their intrinsic consistencies and their inter-relationships. Because of its inherent rationality, this unified theory of reinforced concrete can serve as the basis for the formulation of a universal and international design code. Includes an appendix and accompanying website hosting the authors’ finite element program SCS along with instructions and examples Offers comprehensive coverage of content ranging from fundamentals of flexure, shear and torsion all the way to non-linear finite element analysis and design of wall-type structures under earthquake loading. Authored by world-leading experts on torsion and shear
Author: K. Maekawa
Publisher: CRC Press
Published: 2003-09-02
Total Pages: 768
ISBN-13: 0203302885
DOWNLOAD EBOOKThis book describes the application of nonlinear static and dynamic analysis for the design, maintenance and seismic strengthening of reinforced concrete structures. The latest structural and RC constitutive modelling techniques are described in detail, with particular attention given to multi-dimensional cracking and damage assessment, and their practical applications for performance-based design. Other subjects covered include 2D/3D analysis techniques, bond and tension stiffness, shear transfer, compression and confinement. It can be used in conjunction with WCOMD and COM3 software Nonlinear Mechanics of Reinforced Concrete presents a practical methodology for structural engineers, graduate students and researchers concerned with the design and maintenance of concrete structures.
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
Published: 2013-11-21
Total Pages: 304
ISBN-13: 1475757824
DOWNLOAD EBOOKMasters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for lnformation and Numerica/ Data Analysis and Synthesis (C/NDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficia! to the academic and general scientific and technical community. After fi ve years of this joint undertaking we had concluded that it was in the interest of ali concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and App/ied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. Ali back issues can also be ordered from Plenum. We have reported in Volume 21 (thesis year 1976) a total of 10,586 theses titles from 25 Canadian and 219 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work.
