Modeling and Simulation of Mixed Analog-Digital Systems brings together in one place important contributions and state-of-the-art research results in this rapidly advancing area. Modeling and Simulation of Mixed Analog-Digital Systems serves as an excellent reference, providing insight into some of the most important issues in the field.
Improve your circuit-design potential with this expert guide to the devices and technology used in mixed analog-digital VLSI chips for such high-volume applications as hard-disk drives, wireless telephones, and consumer electronics. The book provides you with a critical understanding of device models, fabrication technology, and layout as they apply to mixed analog-digital circuits.You will learn about the many device-modeling requirements for analog work, as well as the pitfalls in models used today for computer simulators such as Spice. Also included is information on fabrication technologies developed specifically for mixed-signal VLSI chips, plus guidance on the layout of mixed analog-digital chips for a high degree of analog-device matching and minimum digital-to-analog interference.This reference book features an intuitive introduction to MOSFET operation that will enable you to view with insight any MOSFET model ? besides thorough discussions on valuable large-signal and small-signal models.Filled with practical information, this first-of-its-kind book will help you grasp the nuances of mixed-signal VLSI-device models and layout that are crucial to the design of high-performance chips.
Modern telecommunication systems are highly complex from an algorithmic point of view. The complexity continues to increase due to advanced modulation schemes, multiple protocols and standards, as well as additional functionality such as personal organizers or navigation aids. To have short and reliable design cycles, efficient verification methods and tools are necessary. Modeling and simulation need to accompany the design steps from the specification to the overall system verification in order to bridge the gaps between system specification, system simulation, and circuit level simulation. Very high carrier frequencies together with long observation periods result in extremely large computation times and requires, therefore, specialized modeling methods and simulation tools on all design levels. The focus of Modeling and Simulation for RF System Design lies on RF specific modeling and simulation methods and the consideration of system and circuit level descriptions. It contains application-oriented training material for RF designers which combines the presentation of a mixed-signal design flow, an introduction into the powerful standardized hardware description languages VHDL-AMS and Verilog-A, and the application of commercially available simulators. Modeling and Simulation for RF System Design is addressed to graduate students and industrial professionals who are engaged in communication system design and want to gain insight into the system structure by own simulation experiences. The authors are experts in design, modeling and simulation of communication systems engaged at the Nokia Research Center (Bochum, Germany) and the Fraunhofer Institute for Integrated Circuits, Branch Lab Design Automation (Dresden, Germany).
Analog Behavioral Modeling With The Verilog-A Language provides the IC designer with an introduction to the methodologies and uses of analog behavioral modeling with the Verilog-A language. In doing so, an overview of Verilog-A language constructs as well as applications using the language are presented. In addition, the book is accompanied by the Verilog-A Explorer IDE (Integrated Development Environment), a limited capability Verilog-A enhanced SPICE simulator for further learning and experimentation with the Verilog-A language. This book assumes a basic level of understanding of the usage of SPICE-based analog simulation and the Verilog HDL language, although any programming language background and a little determination should suffice. From the Foreword: `Verilog-A is a new hardware design language (HDL) for analog circuit and systems design. Since the mid-eighties, Verilog HDL has been used extensively in the design and verification of digital systems. However, there have been no analogous high-level languages available for analog and mixed-signal circuits and systems. Verilog-A provides a new dimension of design and simulation capability for analog electronic systems. Previously, analog simulation has been based upon the SPICE circuit simulator or some derivative of it. Digital simulation is primarily performed with a hardware description language such as Verilog, which is popular since it is easy to learn and use. Making Verilog more worthwhile is the fact that several tools exist in the industry that complement and extend Verilog's capabilities ... Behavioral Modeling With the Verilog-A Language provides a good introduction and starting place for students and practicing engineers with interest in understanding this new level of simulation technology. This book contains numerous examples that enhance the text material and provide a helpful learning tool for the reader. The text and the simulation program included can be used for individual study or in a classroom environment ...' Dr. Thomas A. DeMassa, Professor of Engineering, Arizona State University
This book, the Mixed-signal Methodology Guide: Advanced Methodology for AMS IP and SoC Design, Verification, and Implementation provides a broad overview of the design, verification and implementation methodologies required for today's mixed-signal designs. The book covers mixed-signal design trends and challenges, abstraction of analog using behavioral models, assertion-based metric-driven verification methodology applied on analog and mixed-signal and verification of low power intent in mixed-signal design. It also describes methodology for physical implementation in context of concurrent mixed-signal design and for handling advanced node physical effects. The book contains many practical examples of models and techniques. The authors believe it should serve as a reference to many analog, digital and mixed-signal designers, verification, physical implementation engineers and managers in their pursuit of information for a better methodology required to address the challenges of modern mixed-signal design.
The essential, intermediate and advanced topics of Simulink are covered in the book. The concept of multi-domain physical modeling concept and tools in Simulink are illustrated with examples for engineering systems and multimedia information. The combination of Simulink and numerical optimization methods provides new approaches for solving problems, where solutions are not known otherwise.
The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.
The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.
Fritzson covers the Modelica language in impressive depth from the basic concepts such as cyber-physical, equation-base, object-oriented, system, model, and simulation, while also incorporating over a hundred exercises and their solutions for a tutorial, easy-to-read experience. The only book with complete Modelica 3.3 coverage Over one hundred exercises and solutions Examines basic concepts such as cyber-physical, equation-based, object-oriented, system, model, and simulation
The demand is exploding for complete, integrated systems that sense, process, manipulate, and control complex entities such as sound, images, text, motion, and environmental conditions. These systems, from hand-held devices to automotive sub-systems to aerospace vehicles, employ electronics to manage and adapt to a world that is, predominantly, neither digital nor electronic. To respond to this design challenge, the industry has developed and standardized VHDL-AMS, a unified design language for modeling digital, analog, mixed-signal, and mixed-technology systems. VHDL-AMS extends VHDL to bring the successful HDL modeling methodology of digital electronic systems design to these new design disciplines.Gregory Peterson and Darrell Teegarden join best-selling author Peter Ashenden in teaching designers how to use VHDL-AMS to model these complex systems. This comprehensive tutorial and reference provides detailed descriptions of both the syntax and semantics of the language and of successful modeling techniques. It assumes no previous knowledge of VHDL, but instead teaches VHDL and VHDL-AMS in an integrated fashion, just as it would be used by designers of these complex, integrated systems. - Explores the design of an electric-powered, unmanned aerial vehicle system (UAV) in five separate case studies to illustrate mixed-signal, mixed-technology, power systems, communication systems, and full system modeling.
