Mm-wave Circuit Design in 16nm FinFET for 6G Applications

Mm-wave Circuit Design in 16nm FinFET for 6G Applications

Author: Bart Philippe

Publisher: Springer Nature

Published: 2022-09-24

Total Pages: 145

ISBN-13: 3031112245

DOWNLOAD EBOOK

This book tackles the challenges of designing mm-wave circuits in 16nm FinFET, from the elementary transistor level to a measured D-band transmitter. The design of crucial building blocks such as oscillators and power amplifiers are covered through theoretical limitations, design methodology and measurement. Offers first book on design of mm-wave circuits above 100GHz in an advanced 16nm FinFET digital technology; Covers fundamentals of transistor layout, circuit implementation and measurements; Provides single-source reference to information otherwise only available in disparate literature.


Millimeter-Wave Circuits for 5G and Radar

Millimeter-Wave Circuits for 5G and Radar

Author: Gernot Hueber

Publisher: Cambridge University Press

Published: 2019-06-20

Total Pages: 455

ISBN-13: 1108757510

DOWNLOAD EBOOK

Discover the concepts, architectures, components, tools, and techniques needed to design millimeter-wave circuits for current and emerging wireless system applications. Focusing on applications in 5G, connectivity, radar, and more, leading experts in radio frequency integrated circuit (RFIC) design provide a comprehensive treatment of cutting-edge physical-layer technologies for radio frequency (RF) transceivers - specifically RF, analog, mixed-signal, and digital circuits and architectures. The full design chain is covered, from system design requirements through to building blocks, transceivers, and process technology. Gain insight into the key novelties of 5G through authoritative chapters on massive MIMO and phased arrays, and learn about the very latest technology developments, such as FinFET logic process technology for RF and millimeter-wave applications. This is an essential reading and an excellent reference for high-frequency circuit designers in both academia and industry.


Electronic Systems and Intelligent Computing

Electronic Systems and Intelligent Computing

Author: Pradeep Kumar Mallick

Publisher: Springer Nature

Published: 2020-09-22

Total Pages: 1126

ISBN-13: 9811570310

DOWNLOAD EBOOK

This book presents selected, high-quality research papers from the International Conference on Electronic Systems and Intelligent Computing (ESIC 2020), held at NIT Yupia, Arunachal Pradesh, India, on 2 – 4 March 2020. Discussing the latest challenges and solutions in the field of smart computing, cyber-physical systems and intelligent technologies, it includes papers based on original theoretical, practical and experimental simulations, developments, applications, measurements, and testing. The applications and solutions featured provide valuable reference material for future product development.


RF Power Amplifiers for Mobile Communications

RF Power Amplifiers for Mobile Communications

Author: Patrick Reynaert

Publisher: Springer Science & Business Media

Published: 2006-11-18

Total Pages: 259

ISBN-13: 1402051174

DOWNLOAD EBOOK

This book tackles both high efficiency and high linearity power amplifier (PA) design in low-voltage CMOS. With its emphasis on theory, design and implementation, the book offers a guide for those actively involved in the design of fully integrated CMOS wireless transceivers. Offering mathematical background, as well as intuitive insight, the book is essential reading for RF design engineers and researchers and is also suitable as a text book.


All-Digital Frequency Synthesizer in Deep-Submicron CMOS

All-Digital Frequency Synthesizer in Deep-Submicron CMOS

Author: Robert Bogdan Staszewski

Publisher: John Wiley & Sons

Published: 2006-09-22

Total Pages: 281

ISBN-13: 0470041943

DOWNLOAD EBOOK

A new and innovative paradigm for RF frequency synthesis and wireless transmitter design Learn the techniques for designing and implementing an all-digital RF frequency synthesizer. In contrast to traditional RF techniques, this innovative book sets forth digitally intensive design techniques that lead the way to the development of low-cost, low-power, and highly integrated circuits for RF functions in deep submicron CMOS processes. Furthermore, the authors demonstrate how the architecture enables readers to integrate an RF front-end with the digital back-end onto a single silicon die using standard ASIC design flow. Taking a bottom-up approach that progressively builds skills and knowledge, the book begins with an introduction to basic concepts of frequency synthesis and then guides the reader through an all-digital RF frequency synthesizer design: Chapter 2 presents a digitally controlled oscillator (DCO), which is the foundation of a novel architecture, and introduces a time-domain model used for analysis and VHDL simulation Chapter 3 adds a hierarchical layer of arithmetic abstraction to the DCO that makes it easier to operate algorithmically Chapter 4 builds a phase correction mechanism around the DCO such that the system's frequency drift or wander performance matches that of the stable external frequency reference Chapter 5 presents an application of the all-digital RF synthesizer Chapter 6 describes the behavioral modeling and simulation methodology used in design The final chapter presents the implementation of a full transmitter and experimental results. The novel ideas presented here have been implemented and proven in two high-volume, commercial single-chip radios developed at Texas Instruments: Bluetooth and GSM. While the focus of the book is on RF frequency synthesizer design, the techniques can be applied to the design of other digitally assisted analog circuits as well. This book is a must-read for students and engineers who want to learn a new paradigm for RF frequency synthesis and wireless transmitter design using digitally intensive design techniques.


Power Management for Wearable Electronic Devices

Power Management for Wearable Electronic Devices

Author: Dima Kilani

Publisher: Springer Nature

Published: 2020-01-17

Total Pages: 118

ISBN-13: 3030378845

DOWNLOAD EBOOK

This book describes power management integrated circuits (PMIC), for power converters and voltage regulators necessary for energy efficient and small form factor systems. The authors discuss state-of-the-art PMICs not only for battery powered wearable devices, but also energy harvesting-based devices. The circuits presented support voltage scaling to reduce the overall average power consumption of a wearable device, resulting in longer device operating time. The discussion includes many designs, control techniques and approaches to distribute efficiently the power among different blocks in the device. • Demonstrates for readers how to innovate in designing power management integrated circuits (PMIC) suitable for wearable devices, powered by either battery or harvesting energy; • Introduces a dual outputs switched capacitor, using a single voltage regulator to minimize the area overhead and discusses the effect of having more than two outputs on the area and power efficiency; • Introduces a novel clock-less digital LDO regulator that eliminates the use of the clocked comparator and serial shift register in the conventional design; • Presents experimental results of energy harvesting-based power management units (PMU), using different combinations of power converters and voltage regulators, providing a guide for designers to select the appropriate option based on device requirements.


Ultra-Low-Voltage Frequency Synthesizer and Successive-Approximation Analog-to-Digital Converter for Biomedical Applications

Ultra-Low-Voltage Frequency Synthesizer and Successive-Approximation Analog-to-Digital Converter for Biomedical Applications

Author: Chung-Chih Hung

Publisher: Springer Nature

Published: 2021-12-07

Total Pages: 231

ISBN-13: 3030888452

DOWNLOAD EBOOK

This book introduces the origin of biomedical signals and the operating principles behind them and introduces the characteristics of common biomedical signals for subsequent signal measurement and judgment. Since biomedical signals are captured by wearable devices, sensor devices, or implanted devices, these devices are all battery-powered to maintain long working time. We hope to reduce their power consumption to extend service life, especially for implantable devices, because battery replacement can only be done through surgery. Therefore, we must understand how to design low-power integrated circuits. Both implantable and in-vitro medical signal detectors require two basic components to collect and transmit biomedical signals: an analog-to-digital converter and a frequency synthesizer because these measured biomedical signals are wirelessly transmitted to the relevant receiving unit. The core unit of wireless transmission is the frequency synthesizer, which provides a wide frequency range and stable frequency to demonstrate the quality and performance of the wireless transmitter. Therefore, the basic operating principle and model of the frequency synthesizer are introduced. We also show design examples and measurement results of a low-power low-voltage integer-N frequency synthesizer for biomedical applications. The detection of biomedical signals needs to be converted into digital signals by an analog-to-digital converter to facilitate subsequent signal processing and recognition. Therefore, the operating principle of the analog-to-digital converter is introduced. We also show implementation examples and measurement results of low-power low-voltage analog-to-digital converters for biomedical applications.


Mobile Communication Networks: 5G and a Vision of 6G

Mobile Communication Networks: 5G and a Vision of 6G

Author: Mladen Božanić

Publisher: Springer Nature

Published: 2021-02-15

Total Pages: 335

ISBN-13: 3030692736

DOWNLOAD EBOOK

This book contributes to the body of scholarly knowledge by exploring the main ideas of wireless networks of past, present, and future, trends in the field of networking, the capabilities of 5G and technologies that are potential enablers of 6G, potential 6G applications and requirements, as well as unique challenges and opportunities that 6G research is going to offer over the next decade. It covers research topics such as communication via millimeter-waves, terahertz waves and visible light to enable faster speeds, as well as research into achieving other basic requirements of 6G networks. These include low end-to-end latency, high energy efficiency, coverage that is ubiquitous and always-on, integration of terrestrial wireless with non-terrestrial networks, network management that is made more effective by connected intelligence with machine learning capabilities, as well as support for the evolution of old service classes and support for new ones.


Design and Analysis of Multi-Band Filtering Circuits

Design and Analysis of Multi-Band Filtering Circuits

Author: Xiaojun Bi

Publisher:

Published: 2022

Total Pages: 0

ISBN-13: 9789811678424

DOWNLOAD EBOOK

The book systematically introduces the design theory and method of multi-band RF filtering circuits for the modern wireless communication systems or radar systems, which are required to operate at multi-bands. These multi-band filtering RF circuits have drawn more and more attention from the engineers and scientists in the field of RF circuits design. The book proposes the detailed theoretical analysis and abundant experimental data of multi-mode resonators, multi-band bandpass filter with high selectivity, reflectionless multi-band bandpass filter, balanced filter with high suppression, slotline based multi-band balun filter, switchable filtering diplexer based on reused L-shape resonator and miniaturized 55-/95-GHz on-chip dual-band bandpass Filter. The book is intended for undergraduate and graduate students who are interested in filtering circuits design, researchers who are investigating RF & microwave systems, as well as design engineers who are working in the RF & microwave circuits field. Readers can get an in-depth understanding about the multi-band RF filtering circuits design theory and method.


Bandwidth and Efficiency Enhancement in Radio Frequency Power Amplifiers for Wireless Transmitters

Bandwidth and Efficiency Enhancement in Radio Frequency Power Amplifiers for Wireless Transmitters

Author: Karun Rawat

Publisher: Springer

Published: 2021-03-06

Total Pages: 390

ISBN-13: 9783030388683

DOWNLOAD EBOOK

This book focuses on broadband power amplifier design for wireless communication. Nonlinear model embedding is described as a powerful tool for designing broadband continuous Class-J and continuous class F power amplifiers. The authors also discuss various techniques for extending bandwidth of load modulation based power amplifiers, such as Doherty power amplifier and Chireix outphasing amplifiers. The book also covers recent trends on digital as well as analog techniques to enhance bandwidth and linearity in wireless transmitters. Presents latest trends in designing broadband power amplifiers; Covers latest techniques for using nonlinear model embedding in designing power amplifiers based on waveform engineering; Describes the latest techniques for extending bandwidth of load modulation based power amplifiers such as Doherty power amplifier and Chireix outphasing amplifiers; Includes coverage of hybrid analog/digital predistortion as wideband solution for wireless transmitters; Discusses recent trends on on-chip power amplifier design with GaN /GaAs MMICs for high frequency applications.