Metallized Plastics 7: Fundamental and Applied Aspects

Metallized Plastics 7: Fundamental and Applied Aspects

Author: Kash L. Mittal

Publisher: CRC Press

Published: 2020-04-12

Total Pages: 315

ISBN-13: 1466562366

DOWNLOAD EBOOK

This volume documents the proceedings of the 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, held in Newark, New Jersey, December 2-3, 1999. This volume contains a total of 16 papers, which were all rigorously peer reviewed and suitably revised before inclusion. The book is divided into two parts: Metallization Techniques and Properties of Metal Deposits, and Interfacial and Adhesion Aspects. The topics covered include: various metallization techniques for a variety of plastics including some novel developments involving suitable plastic pretreatments; modification of polymers by plasma and ion-assisted reactions; metal doped plasma polymer films; metal-polyimide nanocomposite films; investigation of metal/polymer interactions by a variety of techniques; ways to improve adhesion of metal/polymer systems; modeling of metal/polymer interfaces; application of surface analytical techniques in the arena of metallized plastics; and ultrathin films on metal surfaces. This volume offers a wealth of information and represents current commentary on the R&D activity taking place in the technologically highly important field of metallized plastics and is of value and interest to anyone interested in the fundamental or applied aspects of metallized plastics.


Metallized Plastics 5&6: Fundamental and Applied Aspects

Metallized Plastics 5&6: Fundamental and Applied Aspects

Author: Kash L. Mittal

Publisher: CRC Press

Published: 1998-10-22

Total Pages: 449

ISBN-13: 1466562102

DOWNLOAD EBOOK

This book chronicles the proceedings of the 5th and 6th symposia on Metallized Plastics: Fundamental and Applied Aspects, held in May 1996 and September 1997 respectively. This volume contains 29, carefully reviewed, revised and up-dated papers which were presented at both symposia. The book is divided in the following three parts: Metallization Te


Polymer Surface Modification: Relevance to Adhesion, Volume 5

Polymer Surface Modification: Relevance to Adhesion, Volume 5

Author: Kash L. Mittal

Publisher: CRC Press

Published: 2009-03-16

Total Pages: 406

ISBN-13: 1466561483

DOWNLOAD EBOOK

The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also the


Polyimides and other high temperature polymers

Polyimides and other high temperature polymers

Author: K. L. Mittal

Publisher: VSP

Published: 2003-03

Total Pages: 554

ISBN-13: 9789067643788

DOWNLOAD EBOOK

Annotation Containing 32 peer-reviewed papers, this volume documents the proceedings of the international symposium of the same name (held under the aegis of the Materials Science and Technology Conferences) in December of 2001. Devoted to research into high-temperature polymers, the papers are organized into sections dealing with synthesis, properties, and bulk characterization in the first half and surface modification, interfacial or adhesion aspects, and applications in the second. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).


Low Dielectric Constant Materials for IC Applications

Low Dielectric Constant Materials for IC Applications

Author: Paul S. Ho

Publisher: Springer Science & Business Media

Published: 2003

Total Pages: 340

ISBN-13: 9783540678199

DOWNLOAD EBOOK

Low dielectric constant materials are an important component of microelectronic devices. This comprehensive book covers the latest low-dielectric-constant (low-k) materials technology, thin film materials characterization, integration and reliability for back-end interconnects and packaging applications in microelectronics. Highly informative contributions from leading academic and industrial laboratories provide comprehensive information about materials technologies for


Adhesion in Microelectronics

Adhesion in Microelectronics

Author: K. L. Mittal

Publisher: John Wiley & Sons

Published: 2014-08-25

Total Pages: 293

ISBN-13: 1118831349

DOWNLOAD EBOOK

This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings


The Plasma Chemistry of Polymer Surfaces

The Plasma Chemistry of Polymer Surfaces

Author: Jörg Florian Friedrich

Publisher: John Wiley & Sons

Published: 2012-02-13

Total Pages: 479

ISBN-13: 352764802X

DOWNLOAD EBOOK

More than 99% of all visible matter in the universe occurs as highly ionized gas plasma with high energy content. Electrical low- and atmospheric-pressure plasmas are characterized by continuous source of moderate quantities of energy or enthalpy transferred predominantly as kinetic energy of electrons. Therefore, such energetically unbalanced plasmas have low gas temperature but produce sufficient energy for inelastic collisions with atoms and molecules in the gas phase, thus producing reactive species and photons, which are able to initiate all types of polymerizations or activate any surface of low reactive polymers. However, the broadly distributed energies in the plasma exceed partially the binding energies in polymers, thus initiating very often unselective reactions and polymer degradation. The intention of this book is to present new plasma processes and new plasma reactions of high selectivity and high yield. This book aims to bridge classical and plasma chemistry, particularly focusing on polymer chemistry in the bulk and on the surface under plasma exposure. The stability of surface functionalization and the qualitative and quantitative measurement of functional groups at polymer surface are featured prominently, and chemical pathways for suppressing the undesirable side effects of plasma exposure are proposed and illustrated with numerous examples. Special attention is paid to the smooth transition from inanimate polymer surfaces to modified bioactive polymer surfaces. A wide range of techniques, plasma types and applications are demonstrated.


Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, Volume 4

Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, Volume 4

Author: Kash L. Mittal

Publisher: CRC Press

Published: 2007-07-10

Total Pages: 435

ISBN-13: 9047420985

DOWNLOAD EBOOK

This book is mostly based on papers presented at the Fourth International Symposium on this topic held in Savannah, Georgia. However, in addition to these papers, certain very relevant papers have also been included to broaden the scope and thus enhance the value of this book.Currently there is tremendous interest in these material because of their


Particles in Gases and Liquids 3

Particles in Gases and Liquids 3

Author: K.L. Mittal

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 289

ISBN-13: 1489911871

DOWNLOAD EBOOK

This book documents the proceedings of the Third Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. This series of symposia was initiated in 1987 in light of the growing importance to eliminate particles from process gases and liquids. As pointed out in the Preface to antecedent volumes in this series that particles in process gases and liquids could cause significant yield losses in precision manufacturing and concomitantly there has been heightened interest in understanding the behavior of particles in gases and liquids and devising ways to eliminate, or at least reduce substantially, these particles. The concern about particles in gases and liquids has been there for qui.te some time in the microelectronics arena, but there are other areas also where particles are of significant concern, e.g. in operation theatres in hospitals, food and beverage industry, and pharmaceutical manufacturing. This symposium basically had the same objectives as its predecessors, but to provide an update on the R&D activity taking place in the arena of particle detection, characterization and control. The printed program comprised a total of 28 papers dealing with variegated aspects of particles in gases and liquids. There were brisk and lively discussions and the attendees offered many positive comments, which goes to show that it was a well-received and needed symposium.


Metal-Polymer Systems

Metal-Polymer Systems

Author: Jörg Florian Friedrich

Publisher: John Wiley & Sons

Published: 2017-12-04

Total Pages: 444

ISBN-13: 352733677X

DOWNLOAD EBOOK

The result of decades of research by a pioneer in the field, this is the first book to deal exclusively with achieving high-performance metal-polymer composites by chemical bonding. Covering both the academic and practical aspects, the author focuses on the chemistry of interfaces between metals and polymers with a particular emphasis on the chemical bonding between the different materials. He elucidates the various approaches to obtaining a stable interface, including, but not limited to, thermodynamically driven redox reactions, bond protection to prevent hydrolysis, the introduction of barrier layers, and stabilization by spacer molecules. Throughout, chemical bonding is promoted as a simple and economically viable alternative to adhesion based on reversible weak physical interaction. Consequently, the text equips readers with the practical tools necessary for designing high-strength metal-polymer composites with such desired properties as resilience, flexibility, rigidity or degradation resistance.