MEMS and Nanotechnology, Volume 8: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the eighth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Small-Scale Plasticity MEMS and Electronic Packaging Mechanics of Graphene Interfacial Mechanics Methods in Measuring Small-Scale Displacements Organic and Inorganic Nanowires AFM and Resonant-Based Methods Thin Films and Nano fibers
This the second volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 40 chapters on Microelectromechanical Systems and Nanotechnology. It presents early findings from experimental and computational investigations on MEMS and Nanotechnology including contributions on Nanomechanical Standards, Magneto-mechanical MEMS Sensors, Piezoelectric MEMS for Energy Harvesting, and Linear and Nonlinear Mass Sensing.
MEMS and Nanotechnology, Volume 4 represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Electrochemical Micromachining for Nanofabrication, MEMS and Nanotechnology is the first book solely dedicated to electrochemical micromachining (EMM). It begins with fundamentals, techniques, processes, and conditions, continuing with in-depth discussions of mechanisms of material removal, including an empirical model on the material removal rate for EMM (supported by experimental validation). The book moves next to construction-related features of EMM setup suitable for industrial micromachining applications, varying types of EMM, and the latest developments in the improvement of EMM setup. Further, it covers power supply, roll of electrolyte, and other major factors influencing EMM processes, and reports research findings concerning the improvement of machining accuracy and efficiency. Finally, the book devotes a chapter to the design and development of micro-tools, one of the most vital components in EMM. - Covers the generation of micro features used for advanced engineering of materials for fabrication of MEMS, microsystems and other micro-engineering applications - Explores the trend of decreasing size of fabricated devices, reflected in coverage of generation of high-precision nano-features on metal and semiconductors utilizing SPM, STM, and AFM, and nanotechnology aspects of EMM - Describes nanofabrication utilizing anodic dissolutions for mass manufacturing by overcoming obstacles utilizing electrochemical microsystem technology (EMST) and electrochemical nanotechnology (ENT)
This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.
MEMS and Nanotechnology, Volume 5: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Microelectronics Packaging Single Atom/Molecule Mechanical Testing MEMS Devices & Fabrication In-Situ Mechanical Testing Nanoindentation Experimental Analysis of Low-Dimensional Materials for Nanotechnology
Mikro- und Nanotechnik haben Wissenschaft und Forschung revolutioniert. In Zukunft werden sie auch den Alltag verändern. Nun liegt der erste Band einer neuen Buchreihe vor: Advanced Micro and Nano Systems 1. Henry Baltes und seine Co-Autoren knüpfen mit AMN an die Sensors Update-Reihe an. Das Autorenteam wurde um weitere Experten erweitert. AMN wird zwei Mal pro Jahr mit einem neuen Band die aktuellen Entwicklungen in der Mikro- und Nano-Welt begleiten. Die Erforschung und der Einsatz von Mikro- und Nanosystemen sind eines der brandaktuellen Themen im Wissenschaftsbereich. Die Forschungsergebnisse werden mehr und mehr auch konkret umgesetzt. Damit werden Mikro- und Nanotechnologie zu Wirtschaftsfaktoren. Aktuelle Entwicklungen, neue Technologien, Nano-Bauelemente und Systeme im Mikromaßstab - Advanced Micro and Nano Systems, die neue Buchreihe, wird Spiegel der spannenden und faszinierenden Mikro- und Nano-Welt sein. Zweimal pro Jahr wird es einen neuen AMN-Band geben. Die Autoren sind ausgewiesene Spezialisten. Zu den Herausgebern zählt Henry Baltes, Professor an der ETH Zürich. Er zeichnete bereits für die Bände der Sensors Update-Reihe verantwortlich. Die Artikel ermöglichen Neueinsteigern einen ersten Zugriff auf die Materie. Fachleute erhalten einen umfassenden Überblick. Anspruch der Herausgeber ist es, nicht nur die theoretischen Grundlagen von Mikro- und Nanosystemen zu reflektieren, sondern immer auch praktische Möglichkeiten und die Grenzen der Anwendung im Blick zu haben. Die AMN-Bände sind Handbücher und Nachschlagewerke in einem. Die Reihe richtet sich an Vertreter unterschiedlicher Fachrichtungen: Biologie, Chemie, Mathematik, Sensorindustrie und Materialwissenschaften.
The fabrication of MEMS has been predominately achieved by etching the polysilicon material. However, new materials are in large demands that could overcome the hurdles in fabrication or manufacturing process. Although, an enormous amount of work being accomplished in the area, most of the information is treated as confidential or privileged. It is extremely hard to find the meaningful information for the new or related developments. This book is collection of chapters written by experts in MEMS and NEMS technology. Chapters are contributed on the development of new MEMS and NEMS materials as well as on the properties of these devices. Important properties such as residual stresses and buckling behavior in the devices are discussed as separate chapters. Various models have been included in the chapters that studies the mode and mechanism of failure of the MEMS and NEMS. This book is meant for the graduate students, research scholars and engineers who are involved in the research and developments of advanced MEMS and NEMS for a wide variety of applications. Critical information has been included for the readers that will help them in gaining precise control over dimensional stability, quality, reliability, productivity and maintenance in MEMS and NEMS. No such book is available in the market that addresses the developments and failures in these advanced devices.
Drawing on their experiences in successfully executing hundreds of MEMS development projects, the authors present the first practical guide to navigating the technical and business challenges of MEMS product development, from the initial concept stage all the way to commercialization. The strategies and tactics presented, when practiced diligently, can shorten development timelines, help avoid common pitfalls, and improve the odds of success, especially when resources are limited. MEMS Product Development illuminates what it really takes to develop a novel MEMS product so that innovators, designers, entrepreneurs, product managers, investors, and executives may properly prepare their companies to succeed.
The improvement of energy efficiency in electronics and computing systems is currently central to information and communication technology design; low-cost cooling, autonomous portable systems and functioning on recovered energy all need to be continuously improved to allow modern technology to compute more while consuming less. This book presents the basic principles of the origins and limits of heat dissipation in electronic systems. Mechanisms of energy dissipation, the physical foundations for understanding CMOS components and sophisticated optimization techniques are explored in the first half of the book, before an introduction to reversible and quantum computing. Adiabatic computing and nano-relay technology are then explored as new solutions to achieving improvements in heat creation and energy consumption, particularly in renewed consideration of circuit architecture and component technology. Concepts inspired by recent research into energy efficiency are brought together in this book, providing an introduction to new approaches and technologies which are required to keep pace with the rapid evolution of electronics.
