Stationary steam engines provided the power for the Industrial Revolution which changed the shape of the world. Victorian engines that have been preserved now provide the model engineer with examples to turn into fascinating models. This book provides the plans and instructions to make three models of actual steam engines. The projects have been designed around a set of common components. The first project is the simplest and will form the backbone for the manufacture of the other two, which are slightly more challenging and introduce some advanced techniques. The book is suitable for those with limited machining experience and a modestly equipped workshop, and has over 380 illustrations, including scale plans and colour photographs,
This vintage book is a detailed guide to constructing a model steam engine and single-acting toy engine. The detailed and comprehensive manual is recommended for the serious model enthusiast with an interest in miniature engineering, and is not to be missed by the discerning collector of vintage engineering literature. Contents include: “How to Make a Steam Engine”, “Watt's Engine”, “How to Make an Engine”, “The Safety Valve”, “Engines Without Slide – Valves Easy to Make”, “The Double Action Oscillating Engine”, “Model Steam-Engines”, and “Single-Acting Toy-Engine”. Many vintage books such as this are becoming increasingly scarce and expensive. It is with this in mind that we are republishing this volume now in an affordable, high-quality edition complete with a specially commissioned new introduction on making models.
One of the attractions of model engineering is the opportunity to makes a model of something that no-one has tackled before. Some old engravings have almost every detail in them, but it is possible to make a feasible reconstruction of a model from even the most basic of information. There is no magic formula required, just model engineer's ingenuity and perhaps an ability to 'think in scale'. This is the story of how the author went about recreating a 'lost' steam engine. Based on a sketch and letter from a 1947 issue of Model Engineer the book includes copious colour photographs, plans and full build notes, as well as a source for castings. Full size plans to complement the book can be downloaded from http://www.stubmandrel.co.uk/model-engineering/2-norden-a-vertical-steam-engine, The model is relatively small in size, and i therefore suitable for owners of Myford ML7 or Super 7 lathes or 7 x14 and similar imported Mini Lathes.
A guide to building simple oscillating steam engine models. It describes the making of four such models: Polly, a vertical steam plant, Elizabeth, a horizontal steam power plant, Hercules, a model steam crane, and Jenny Wren, a miniature vertical steam engine.
In this book long-time model maker Stan Bray describes the construction of a range of uncomplicated miniature steam engines, for construction by the model engineer.
This book is a collection of vintage articles on the subject of installing miniature steam engines in model vehicles. Highly-detailed and profusely illustrated, this volume will be of considerable utility enthusiasts with an interest in model engineering, and would make for a fantastic addition to collections of related literature. Contents include: “Simple Model Steam Engine Construction”, “Design for a Motor Car type Steam Engine”, “A Model Compound Under-type Steam Engine”, “A Model Compound Under-Type Steam Engine”, “A Model Compound Under-Type Steam Engine”, “Some Interesting Steam Models”, “A Small Steam and Petrol Air-Gas Plant”, etc. Many vintage books such as this are becoming increasingly scarce and expensive. It is with this in mind that we are republishing this volume now in an affordable, high-quality edition complete with a specially commissioned new introduction on model building.
Model steam engines are scaled-down manifestations or prototypes of steam-driven propulsion systems that were operational in factories, ships, and full-scale steam locomotives throughout the 18th, 19th, and early 20th centuries. These functional models are frequently constructed to scale and employ the same fundamental principles as their larger counterparts. Fundamental elements of model steam engines consist of: Similar to conventional steam engines, the furnace is an essential component. Water is heated to generate vapor. The steam engine is the mechanical device responsible for transforming the energy present in steam into motion. Typical components consist of a crankshaft and a piston. Cylinder: The expansion of steam within the cylinder converts thermal energy into mechanical labor by pushing a piston. Flywheel: This component is frequently included to reduce engine vibration. During the power stroke, the flywheel stores energy, which it subsequently discharges for the remainder of the cycle. Fuel Source: To heat the boiler and generate steam, model steam engines may utilize solid fuel tablets, liquid fuels, or even electricity. For a variety of reasons, model steam engines are popular among collectors and hobbyists: Constructing and managing a model steam engine can impart practical knowledge of fundamental engineering principles, mechanics, and thermodynamics. Historical Interest: A considerable number of devotees derive pleasure from recreations of steam power on a smaller, more feasible scale, due to its profound historical significance. The construction of model steam engines frequently necessitates meticulous craftsmanship, and numerous enthusiasts derive immense satisfaction from fabricating elaborate and visually appealing prototypes. Hobby Communities: Model steam engine enthusiasts participate in communities where they exchange information, experiences, and creations. It is noteworthy to mention that although certain model steam engines are straightforward and intended for novices, others can be quite intricate and demand a substantial degree of proficiency and expertise to assemble and operate in a secure manner. Furthermore, it is critical to observe safety protocols when handling live steam due to the elevated temperatures and pressures involve
Excerpt from Model Engine-Making in Theory and Practice The Steam Engine in one or other of its many forms is a sufficiently familiar object; not equally familiar, I venture to think, the knowledge of its manner of working. Yet surely in these days of scientific and technical education it would be well that at least the younger members of the community should have some clear perception of the method in which steam exerts the force which has become so necessary to the exigencies of daily modern life. The want of some practical book on Model Engine-Making has during the last few years been made evident by the number of queries upon this subject which have appeared in various journals more or less devoted to the interests of mechanical science. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.