This book is the first volume in a three-volume set on Solid Waste Engineering and Management. It provides an introduction to the topic, and focuses on legislation, transportation, transfer station, characterization, mechanical volume reduction, measurement, combustion, incineration, composting, landfilling, and systems planning as it pertains to solid waste management. The three volumes comprehensively discuss various contemporary issues associated with solid waste pollution management, impacts on the environment and vulnerable human populations, and solutions to these problems.
As the world’s population continues to grow and economic conditions continue to improve, more solid and liquid waste is being generated by society. Improper disposal methods can not only lead to harmful environmental impacts but can also negatively affect human health. To prevent further harm to the world’s ecosystems, there is a dire need for sustainable waste management practices that will safeguard the environment for future generations. Waste Management: Concepts, Methodologies, Tools, and Applications is a vital reference source that examines the management of different types of wastes and provides relevant theoretical frameworks about new waste management technologies for the control of air, water, and soil pollution. Highlighting a range of topics such as contaminant removal, landfill treatment, and recycling, this multi-volume book is ideally designed for environmental engineers, waste authorities, solid waste management companies, landfill operators, legislators, environmentalists, policymakers, government officials, academicians, researchers, and students.
Hazardous Waste and Solid Waste covers the life of municipal solid waste, bulky (C&D) waste and hazardous waste. It provides in-depth coverage on all aspects of waste characterization, treatment, disposal, and recovery. The book identifies the sources of solid waste, provides general information of the quantities of waste generated and discarded, and examines the potential effects of solid waste on daily life and the environment. It also defines hazardous waste, and provides the criteria environmental engineers must use to determine if material is indeed a waste. The editors give attention to the unique problems of risk assessment, including the Hazard Ranking System and the National Priority List, and transport of hazardous materials. It addresses radioactivity individually, with sections devoted to the principles and sources of radioactivity, safety standards, detection, analysis, recovery, low-level radioactive waste, and high-level radioactive waste. The guide explores municipal waste reduction, material recovery and refuse-derived fuel within a catalog of options for solid waste. Hazardous and Solid Waste is an excellent fundamental resource for those involved in any aspect of waste management. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Solid Waste Recycling and Processing, Second Edition, provides best-practice guidance to solid waste managers and recycling coordinators. The book covers all aspects of solid waste processing, volume reduction, and recycling, encompassing typical recyclable materials (paper, plastics, cans, and organics), construction and demolition debris, electronics, and more. It includes techniques, technologies, and programs to help maximize customer participation rates and revenues, as well as to minimize operating costs. The book is packed with lessons learned by the author during the implementation of the most successful programs worldwide, and includes numerous case studies showing how different systems work in different settings. This book also takes on industry debates such as the merits of curbside-sort versus single-stream recycling and the use of advanced technology in materials recovery facilities. It provides key facts and figures, and brief summaries of legislation in the United States, Europe, and Asia. An extensive glossary demystifies the terminology and acronyms used in different sectors and geographies. The author also explains emerging concepts in recycling such as zero waste, sustainability, LEED certification, and pay-as-you-throw, and places waste management and recycling in wider economic, environmental (sustainability), political, and societal contexts. - Covers single- and mixed-waste streams - Evaluates the technologies and tradeoffs of recycling of materials vs. integrated solutions, including combustion and other transformational options - Covers recycling as part of the bigger picture of solid waste management, processing and disposal
Solid waste management affects every person in the world. By 2050, the world is expected to increase waste generation by 70 percent, from 2.01 billion tonnes of waste in 2016 to 3.40 billion tonnes of waste annually. Individuals and governments make decisions about consumption and waste management that affect the daily health, productivity, and cleanliness of communities. Poorly managed waste is contaminating the world’s oceans, clogging drains and causing flooding, transmitting diseases, increasing respiratory problems, harming animals that consume waste unknowingly, and affecting economic development. Unmanaged and improperly managed waste from decades of economic growth requires urgent action at all levels of society. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 aggregates extensive solid aste data at the national and urban levels. It estimates and projects waste generation to 2030 and 2050. Beyond the core data metrics from waste generation to disposal, the report provides information on waste management costs, revenues, and tariffs; special wastes; regulations; public communication; administrative and operational models; and the informal sector. Solid waste management accounts for approximately 20 percent of municipal budgets in low-income countries and 10 percent of municipal budgets in middle-income countries, on average. Waste management is often under the jurisdiction of local authorities facing competing priorities and limited resources and capacities in planning, contract management, and operational monitoring. These factors make sustainable waste management a complicated proposition; most low- and middle-income countries, and their respective cities, are struggling to address these challenges. Waste management data are critical to creating policy and planning for local contexts. Understanding how much waste is generated—especially with rapid urbanization and population growth—as well as the types of waste generated helps local governments to select appropriate management methods and plan for future demand. It allows governments to design a system with a suitable number of vehicles, establish efficient routes, set targets for diversion of waste, track progress, and adapt as consumption patterns change. With accurate data, governments can realistically allocate resources, assess relevant technologies, and consider strategic partners for service provision, such as the private sector or nongovernmental organizations. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 provides the most up-to-date information available to empower citizens and governments around the world to effectively address the pressing global crisis of waste. Additional information is available at http://www.worldbank.org/what-a-waste.
In a world where waste incinerators are not an option and landfills are at over capacity, cities are hard pressed to find a solution to the problem of what to do with their solid waste. Handbook of Solid Waste Management, 2/e offers a solution. This handbook offers an integrated approach to the planning, design, and management of economical and environmentally responsible solid waste disposal system. Let twenty industry and government experts provide you with the tools to design a solid waste management system capable of disposing of waste in a cost-efficient and environmentally responsible manner. Focusing on the six primary functions of an integrated system--source reduction, toxicity reduction, recycling and reuse, composting, waste- to-energy combustion, and landfilling--they explore each technology and examine its problems, costs, and legal and social ramifications.
Effective Waste Management and Circular Economy: Legislative Framework and Strategies is an invaluable resource for researchers, policymakers, implementers and PhD, graduate and Under Graduate level students in universities and colleges analysing the legal framework, strategies in waste management, circular economy adoption, use of mathematical and statistical modelling in setting waste management strategies, sanitation and Hygiene in waste management. While huge wastes are wasted by dumping, there is potential of resource circulation by enforcing legislative framework to effective resource utilisation and creating business opportunities. Circularity of resources in waste streams can contribute to a more secure, sustainable, and economically sound future through the followings: Effective legal framework, strategies and policy instruments, Adoption of circular economy and recycling technologies, Support of IoT and appropriate decision making and modelling, Adoption of alternatives to plastics and other hazardous materials, Economic feasibility as business case, commercialisation, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field. Sadhan Kumar Ghosh, Professor at Jadavpur University, internationally well-known expert working in varied interdisciplinary fields including waste management having research collaboration in 40 countries. Sasmita Samanta, Pro-Vice Chancellor, KIIT Deemed to be University, Bhubaneswar, Odisha, India having research experience in management & academic administration. Harish Hirani, Director at CSIR-CMERI, Durgapur, having wider fields of research in IIT Delhi with a number of research collaboration. Carlos RV Silva Filho, Director, Presidente, ABRELPE, Sao Paulo/SP - Brazil & Presidente, International Solid Waste Association, Netherlands has experience of working in number of international projects
Incineration has been used widely for waste disposal, including household, hazardous, and medical wasteâ€"but there is increasing public concern over the benefits of combusting the waste versus the health risk from pollutants emitted during combustion. Waste Incineration and Public Health informs the emerging debate with the most up-to-date information available on incineration, pollution, and human healthâ€"along with expert conclusions and recommendations for further research and improvement of such areas as risk communication. The committee provides details on: Processes involved in incineration and how contaminants are released. Environmental dynamics of contaminants and routes of human exposure. Tools and approaches for assessing possible human health effects. Scientific concerns pertinent to future regulatory actions. The book also examines some of the social, psychological, and economic factors that affect the communities where incineration takes place and addresses the problem of uncertainty and variation in predicting the health effects of incineration processes.
