Laboratory Evaluation of Anti-strip Additives in Hot Mix Asphalt

Laboratory Evaluation of Anti-strip Additives in Hot Mix Asphalt

Author: Bradley J. Putnam

Publisher:

Published: 2006

Total Pages: 178

ISBN-13:

DOWNLOAD EBOOK

The use of hydrated lime or other liquid anti stripping agents (ASA) is the most common method to improve the moisture susceptibility of asphalt mixes. However, most laboratory test conditions used to evaluate the moisture susceptibility of the mixes are only for a short duration of time. This might not be a good representation of the field conditions (i.e., several months or years of service). Thus, a study to evaluate the effects of conditioning the mixes for longer durations was initiated. Also, another problem with the use of the liquid anti stripping agents is their heat storage stability. This report addresses these two issues, by preparing and testing mixtures made with fresh binder for indirect tensile strength after conditioning the samples for 1, 7, 28, 90 and 180 days, and samples prepared from binder stored for three days at 160° C after conditioning them for 1, 28 and 90 days. The results of this study indicated that hydrated lime and the liquid anti stripping agents were equally effective for the mixes used in this research when conditioned beyond one day. In the case of samples prepared from stored binder, there was no significant difference in the effectiveness of hydrated lime and the liquid anti stripping agents even after conditioning for one day. Though it was observed that none of the ASA treatments performed better than others in the case of samples prepared with stored binder, it was also observed that almost all mixes gave significantly similar wet ITS and TSR values as samples prepared from fresh binder.


Laboratory Evaluation of Anti-strip Additives in Hot Mix Asphalt

Laboratory Evaluation of Anti-strip Additives in Hot Mix Asphalt

Author: Bradley J. Putnam

Publisher:

Published: 2006

Total Pages: 178

ISBN-13:

DOWNLOAD EBOOK

The use of hydrated lime or other liquid anti stripping agents (ASA) is the most common method to improve the moisture susceptibility of asphalt mixes. However, most laboratory test conditions used to evaluate the moisture susceptibility of the mixes are only for a short duration of time. This might not be a good representation of the field conditions (i.e., several months or years of service). Thus, a study to evaluate the effects of conditioning the mixes for longer durations was initiated. Also, another problem with the use of the liquid anti stripping agents is their heat storage stability. This report addresses these two issues, by preparing and testing mixtures made with fresh binder for indirect tensile strength after conditioning the samples for 1, 7, 28, 90 and 180 days, and samples prepared from binder stored for three days at 160° C after conditioning them for 1, 28 and 90 days. The results of this study indicated that hydrated lime and the liquid anti stripping agents were equally effective for the mixes used in this research when conditioned beyond one day. In the case of samples prepared from stored binder, there was no significant difference in the effectiveness of hydrated lime and the liquid anti stripping agents even after conditioning for one day. Though it was observed that none of the ASA treatments performed better than others in the case of samples prepared with stored binder, it was also observed that almost all mixes gave significantly similar wet ITS and TSR values as samples prepared from fresh binder.


Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements—Mairepav9

Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements—Mairepav9

Author: Christiane Raab

Publisher: Springer Nature

Published: 2020-06-19

Total Pages: 955

ISBN-13: 3030486796

DOWNLOAD EBOOK

This book gathers the proceedings of an international conference held at Empa (Swiss Federal Laboratories for materials Science and Technology) in Dübendorf, Switzerland, in July 2020. The conference series was established by the International Society of Maintenance and Rehabilitation of Transport Infrastructure (iSMARTi) for promoting and discussing state-of-the-art design, maintenance, rehabilitation and management of pavements. The inaugural conference was held at Mackenzie Presbyterian University in Sao Paulo, Brazil, in 2000. The series has steadily grown over the past 20 years, with installments hosted in various countries all over the world. The respective contributions share the latest insights from research and practice in the maintenance and rehabilitation of pavements, and discuss advanced materials, technologies and solutions for achieving an even more sustainable and environmentally friendly infrastructure.


Mix Design Practices for Warm Mix Asphalt

Mix Design Practices for Warm Mix Asphalt

Author: Ramon Francis Bonaquist

Publisher: Transportation Research Board

Published: 2011

Total Pages: 111

ISBN-13: 0309155592

DOWNLOAD EBOOK

TRB's National Cooperative Highway Research Program (NCHRP) Report 691: Mix Design Practices for Warm-Mix Asphalt explores a mix design method tailored to the unique material properties of warm mix asphalt technologies. Warm mix asphalt (WMA) refers to asphalt concrete mixtures that are produced at temperatures approximately 50°F (28°C) or more cooler than typically used in the production of hot mix asphalt (HMA). The goal of WMA is to produce mixtures with similar strength, durability, and performance characteristics as HMA using substantially reduced production temperatures. There are important environmental and health benefits associated with reduced production temperatures including lower greenhouse gas emissions, lower fuel consumption, and reduced exposure of workers to asphalt fumes. Lower production temperatures can also potentially improve pavement performance by reducing binder aging, providing added time for mixture compaction, and allowing improved compaction during cold weather paving. Appendices to NCHRP Report 691 include the following. Appendices A, B, and D are included in the printed and PDF version of the report. Appendices C and E are available only online.


Solving Pavement and Construction Materials Problems with Innovative and Cutting-edge Technologies

Solving Pavement and Construction Materials Problems with Innovative and Cutting-edge Technologies

Author: Zahid Hossain

Publisher: Springer

Published: 2018-07-16

Total Pages: 197

ISBN-13: 3319957929

DOWNLOAD EBOOK

This book presents challenges in transportation engineering, recent developments and advancements in technologies, and design and construction using sustainable materials. The articles presented in this volume focus on fundamental investigations on various aspects of civil engineering materials and structures. The scope of this volume is the application of findings for solving problems in geotechnical, pavement, and transportation engineering using emerging techniques. Papers were selected from the 5th GeoChina International Conference 2018 on Civil Infrastructures Confronting Severe Weathers and Climate Changes Conference, held on July 23 to 25, 2018 in HangZhou, China.