All the information in this workbook was hand-picked and edited by the person responsible for documenting all Juniper technologies. It has been produced to be a portable technical compendium on all things Juniper. This comprehensive reference was culled from an array of technical material including technical manuals, Juniper Technical Assurance Center FAQs, and field alerts.
An oft-repeated adage among telecommunication providers goes, “There are ve things that matter: reliability, reliability, reliability, time to market, and cost. If you can’t do all ve, at least do the rst three. ” Yet, designing and operating reliable networks and services is a Herculean task. Building truly reliable components is unacceptably expensive, forcing us to c- struct reliable systems out of unreliable components. The resulting systems are inherently complex, consisting of many different kinds of components running a variety of different protocols that interact in subtle ways. Inter-networkssuch as the Internet span multiple regions of administrative control, from campus and cor- rate networks to Internet Service Providers, making good end-to-end performance a shared responsibility borne by sometimes uncooperative parties. Moreover, these networks consist not only of routers, but also lower-layer devices such as optical switches and higher-layer components such as rewalls and proxies. And, these components are highly con gurable, leaving ample room for operator error and buggy software. As if that were not dif cult enough, end users understandably care about the performance of their higher-level applications, which has a complicated relationship with the behavior of the underlying network. Despite these challenges, researchers and practitioners alike have made trem- dous strides in improving the reliability of modern networks and services.
This complete field guide, authorized by Juniper Networks, is the perfect hands-on reference for deploying, configuring, and operating Juniper’s SRX Series networking device. Authors Brad Woodberg and Rob Cameron provide field-tested best practices for getting the most out of SRX deployments, based on their extensive field experience. While their earlier book, Junos Security, covered the SRX platform, this book focuses on the SRX Series devices themselves. You'll learn how to use SRX gateways to address an array of network requirements—including IP routing, intrusion detection, attack mitigation, unified threat management, and WAN acceleration. Along with case studies and troubleshooting tips, each chapter provides study questions and lots of useful illustrations. Explore SRX components, platforms, and various deployment scenarios Learn best practices for configuring SRX’s core networking features Leverage SRX system services to attain the best operational state Deploy SRX in transparent mode to act as a Layer 2 bridge Configure, troubleshoot, and deploy SRX in a highly available manner Design and configure an effective security policy in your network Implement and configure network address translation (NAT) types Provide security against deep threats with AppSecure, intrusion protection services, and unified threat management tools
Detailed examples and case studies make this the ideal hands-on guide to implementing Juniper Networks systems. It contains something for everyone, and covers all the basics for beginners while challenging experience users with tested configuration examples throughout the book.
This book constitutes the refereed proceedings of the Third International Workshop on Quality of Service in Multiservice IP Networks, QoS-IP 2005, held in Catania, Italy in February 2005. The 50 revised full papers presented were carefully reviewed and selected from around 100 submissions. The papers are organized in topical sections on analytical models, traffic characterization, MPLS failure and restoration, network planning and dimensioning, DiffServ and InfServ, routing, software routers, network architectures for QoS provisioning, multiservice in wireless networks, TCP in special environments, and scheduling.
Here's the book you need to prepare for the JNCIA exam, JN0-201, from Juniper Networks. Written by a team of Juniper Network trainers and engineers, this Study Guide provides: Assessment testing to focus and direct your studies In-depth coverage of official test objectives Hundreds of challenging practice questions, in the book and on the CD Authoritative coverage of all test objectives, including: Working with the JUNOS software Implementing Juniper Networks boot devices Troubleshooting Routing Information Protocol Implementing a routing policy Configuring and monitoring an OSPF Network Implementing Border Gateway Protocol Monitoring and troubleshooting an IS-IS network Understanding the Reverse Path Forwarding process Operating firewall filters Using Multiprotocol Label Switching Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Amiya Chakravarty is a big name in production manufacturing and Josh Eliashberg is a huge name in marketing. This is one of the first books that examines the interface of Marketing and Production, with the chapters written by well-known people in the field. Hardcover version published in December 2003.
Like the popular guides The MX Series and Juniper QFX5100 Series, this practical book--written by the same author--introduces new QFX10000 concepts in switching and virtualization, specifically in the core of the data center network. The Juniper QFX10000 Series from Juniper Networks is a game-changer. This new book by Douglas Hanks is the authoritative guide.
Discover why routers in the Juniper MX Series, with their advanced feature sets and record breaking scale, are so popular among enterprises and network service providers. This authoritative book shows you step-by-step how to implement high-density, high-speed Layer 2 and Layer 3 Ethernet services, using Router Engine DDoS Protection, Multi-chassis LAG, Inline NAT, IPFIX/J-Flow, and many other Juniper MX features. Written by Juniper Network engineers, each chapter covers a specific Juniper MX vertical and includes review questions to help you test what you learn. Delve into the Juniper MX architecture, including the next generation Junos Trio chipset Explore Juniper MX’s bridging, VLAN mapping, and support for thousands of virtual switches Add an extra layer of security by combining Junos DDoS protection with firewall filters Create a firewall filter framework that only applies filters specific to your network Discover the advantages of hierarchical scheduling Combine Juniper MX routers, using a virtual chassis or Multi-chassis LAG Install network services such as Network Address Translation (NAT) inside the Trio chipset Examine Junos high availability features and protocols on Juniper MX "For the no-nonsense engineer who likes to get down to it, The Juniper MX Series targets both service providers and enterprises with an illustrative style supported by diagrams, tables, code blocks, and CLI output. Readers will discover features they didn't know about before and can't resist putting them into production." —Ethan Banks, CCIE #20655, Packet Pushers Podcast Host
