The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers
Interfaces in Particle and Fibre-Reinforced Composites: From Macro- to Nanoscale addresses recent research findings on the particle-matrix interface at different length scales. The book's main focus is on the reinforcement of materials by particles that can result in a composite material of high stiffness and strength, but it also focuses on how the particle interacts with the (matrix) material, which may be a polymer, biological-based material, ceramic or conventional metal. The different types of particle reinforced composites are discussed, as is load transfer at the particle-matrix interface. Readers will learn how to select materials and about particle structure. Significant progress has been made in applying these approaches, thus making this book a timely piece on recent research findings on the particle-matrix interface at different length scales. Features wide coverage, from polymer, to ceramics and metal-based particulate composites Structured in a logical order to cover fundamental studies, computer simulations, experimental techniques and characterization
The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces. The book contains eight chapters of discussions on microstructure-property relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intralaminar strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stability during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.
This book is an extended version of the proceedings of the Symposium on Polymer Composites, Interfaces, which was held under the auspices of the Division of Polymer Chemistry, American Chemical Society (ACS) during the annual ACS meeting in Seattle, March, 1983. The importance of the interface in composite materials has been recognized since the inception of modern composite technology. Specifically, silane coupling agents were developed for glass fiber reinforced compOSites at a very early date. Ever since then the diversity of composite materials and the development of various surface treatment methods have led to the establishment of an "interface art." A trial-and-error approach has dominated the interfacial aspects of composite technology until very recently. With the advent of modern analytical techniques for surface characterization, it became possible to study detailed surface and interface structures. It was hoped that this symposium would catalyze such a fundamental and scientific approach in composite studies. For this reason, the symposium was structured to verify the influence of interfacial structures on the mechanical and physical performance of composites and to improve our knowledge of the microstructure of composite interfaces. As the word ·composite" indicates, interdisciplinary interaction is indispensable for proper understanding of multiphase systems.
Emerging Natural and Tailored Nanomaterials for Radioactive Waste Treatment and Environmental Remediation: Principles and Methodologies, Volume 29 provides an overview of the most important radionuclide sources in the environment, their interaction with environmental media, and appropriate remediation techniques. The book focuses on the assessment of radionuclide sorption behavior in contaminated sites and the synthesis of new materials for radionuclides remediation through sorption concepts. Chapters investigate the main interaction mechanisms between toxic/radioactive metal ions with natural and manmade materials, natural clay minerals and oxides, and novel nanomaterials, such as ordered mesoporous silicas, carbon nanotubes, graphene, and metal-organic framework-based materials. Techniques and models discussed include kinetics analysis, thermodynamic analysis, surface complexation models, spectroscopic techniques, and theoretical calculations. Provides a systemic discussion on the interactions between toxic and radioactive metal ions and natural and manmade materials Helps to select the best approach to remove toxic/radioactive metal ions from a surface Edited by a scientific authority in toxic/radioactive metal ion interactions
One of the major reasons for composite failure is a breakdown of the bond between the reinforcement fibres and the matrix. When this happens, the composite loses strength and fails. By engineering the interface between the natural fibres and the matrix, the properties of the composite can be manipulated to give maximum performance. Interface engineering of natural fibre composites for maximum performance looks at natural (sustainable) fibre composites and the growing trend towards their use as reinforcements in composites. Part one focuses on processing and surface treatments to engineer the interface in natural fibre composites and looks in detail at modifying cellulose fibre surfaces in the manufacture of natural fibre composites, interface tuning through matrix modification and preparation of cellulose nanocomposites. It also looks at the characterisation of fibre surface treatments by infrared and raman spectroscopy and the effects of processing and surface treatment on the interfacial adhesion and mechanical properties of natural fibre composites. Testing interfacial properties in natural fibre composites is the topic of part two which discusses the electrochemical characterisation of the interfacial properties of natural fibres, assesses the mechanical and thermochemical properties and moisture uptake behaviour of natural fibres and studies the fatigue and delamination of natural fibre composites before finishing with a look at Raman spectroscopy and x-ray scattering for assessing the interface in natural fibre composites With its distinguished editor and international team of contributors Interface engineering of natural fibre composites for maximum performance is an invaluable resource to composite manufacturers and developers, materials scientists and engineers and anyone involved in designing and formulating composites or in industries that use natural fibre composites.
Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
This volume includes 35 contributions to the 24th Conference of the European Colloid and Interface Society which took place in September 2010 in Prague. The contributions from leading scientists cover a broad spectrum of the following topics: • Self-assembling, Stimuli-responsive and Hierarchically Organized Systems • Colloid, Polymer and Polyelectrolyte Solutions; Concentrated Systems and Gels • Thin Films, Interfaces and Surfaces; Wetting Phenomena • Novel Nano-to-Mesostructured Functional Materials • Biologically Important and Bioinspired Systems; Pharmaceutical and Medical Applications
This volume focuses on quasilinear elliptic differential equations of degenerate type, evolution variational inequalities, and multidimensional hysteresis. It serves both as a survey of results in the field, and as an introductory text for non-specialists interested in related problems.
