Radiation Source Use and Replacement

Radiation Source Use and Replacement

Author: National Research Council

Publisher: National Academies Press

Published: 2008-05-25

Total Pages: 232

ISBN-13: 0309110149

DOWNLOAD EBOOK

In the United States there are several thousand devices containing high-activity radiation sources licensed for use in areas ranging from medical uses such as cancer therapy to safety uses such as testing of structures and industrial equipment. Those radiation sources are licensed by the U.S. Nuclear Regulatory Commission and state agencies. Concerns have been raised about the safety and security of the radiation sources, particularly amid fears that they could be used to create dirty bombs, or radiological dispersal device (RDD). In response to a request from Congress, the U.S. Nuclear Regulatory Commission asked the National Research Council to conduct a study to review the uses of high-risk radiation sources and the feasibility of replacing them with lower risk alternatives. The study concludes that the U.S. government should consider factors such as potential economic consequences of misuse of the radiation sources into its assessments of risk. Although the committee found that replacements of most sources are possible, it is not economically feasible in some cases. The committee recommends that the U.S. government take steps to in the near term to replace radioactive cesium chloride radiation sources, a potential "dirty bomb" ingredient used in some medical and research equipment, with lower-risk alternatives. The committee further recommends that longer term efforts be undertaken to replace other sources. The book presents a number of options for making those replacements.


Industrial Radiology

Industrial Radiology

Author: R. Halmshaw

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 317

ISBN-13: 9401105510

DOWNLOAD EBOOK

Industrial radiography is a well-established non-destructive testing (NDT) method in which the basic principles were established many years ago. However, during 1993-95 the European Standards Organisa tion (CEN) commenced drafting many new standards on NDT including radiographic methods, and when completed these will replace national standards in all the EC member countries. In some cases these standards vary significantly from those in use in the UK at present. These CEN standards are accepted by majority, not unanimous voting, so they will become mandatory even in countries which vote against them. As most are likely to be legal by the time this second edition is published, they are described in the appropriate places in the text. The most important new technical development is the greater use of computers in radiology. In the first edition, computerized tomography was only briefly mentioned at the end of Chapter 11, as it was then largely a medical method with only a few equipments having found a place in industrial use. The method depends on a complex computer program and a large data store. Industrial equipments are now being built, although their spread into industry has been slow. Computer data storage is also being used for radiographic data. Small computers can now store all the data produced by scanning a radiographic film with a small light-spot, and various programs can be applied to these data.


Industrial X-Ray Computed Tomography

Industrial X-Ray Computed Tomography

Author: Simone Carmignato

Publisher: Springer

Published: 2017-10-18

Total Pages: 372

ISBN-13: 3319595733

DOWNLOAD EBOOK

X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.


X-Ray Imaging

X-Ray Imaging

Author: Harry E. Martz

Publisher: CRC Press

Published: 2016-10-26

Total Pages: 590

ISBN-13: 1420009761

DOWNLOAD EBOOK

While books on the medical applications of x-ray imaging exist, there is not one currently available that focuses on industrial applications. Full of color images that show clear spectrometry and rich with applications, X-Ray Imaging fills the need for a comprehensive work on modern industrial x-ray imaging. It reviews the fundamental science of x-ray imaging and addresses equipment and system configuration. Useful to a broad range of radiation imaging practitioners, the book looks at the rapid development and deployment of digital x-ray imaging system.


Radiation Protection and Safety in Industrial Radiography

Radiation Protection and Safety in Industrial Radiography

Author: International Atomic Energy Agency

Publisher:

Published: 1999

Total Pages: 78

ISBN-13:

DOWNLOAD EBOOK

This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information explaining the responsibilities of regulatory authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of enhancing radiation protection and safety.


Lessons Learned from Accidents in Industrial Radiography

Lessons Learned from Accidents in Industrial Radiography

Author: International Atomic Energy Agency

Publisher:

Published: 1998

Total Pages: 74

ISBN-13:

DOWNLOAD EBOOK

This Safety Report contains the findings of extensive research in terms of the lessons that can be learned from accidents which have occurred in industrial radiography, both in developed and developing countries. The review was carried out by a team of regulatory authorities, manufacturers and safety advisers. The objectives were to draw lessons from the initiating events of the accidents, the contributing factors and the consequences, and to identify several measures that, if implemented, would improve safety performance in industrial radiography.